Fujitsu P1120 is a notebook computer that offers a range of capabilities to enhance your productivity and user experience. With its advanced features, it is well-suited for a variety of tasks, including work, education, and personal use.
Here are some key capabilities of the Fujitsu P1120:
Device Control and Customization:
- You can customize the operating environment of your notebook through the BIOS Setup Utility. This utility allows you to configure device control features, such as changing I/O addresses and boot devices, to suit your specific needs.
Comprehensive System Security:
Fujitsu P1120 is a notebook computer that offers a range of capabilities to enhance your productivity and user experience. With its advanced features, it is well-suited for a variety of tasks, including work, education, and personal use.
Here are some key capabilities of the Fujitsu P1120:
Device Control and Customization:
- You can customize the operating environment of your notebook through the BIOS Setup Utility. This utility allows you to configure device control features, such as changing I/O addresses and boot devices, to suit your specific needs.
Comprehensive System Security:
Fujitsu LifeBook
P Series
BIOS Guide
LifeBook P Series Model:
P1120
Document Date: 10/30/02
Document Part Number: FPC58-0796-01
FUJITSU PC CORPORATION
2
LifeBook P Series Notebook BIOS
P Series BIOS
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the
operating environment for your notebook. Your BIOS
is set at the factory for normal operating conditions,
therefore there is no need to set or change the BIOS
environment to operate your notebook.
The BIOS Setup Utility configures:
•Device control feature parameters, such as changing
I/O addresses and boot devices.
•System Data Security feature parameters, such
as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following:
1. Turn on or restart your notebook.
2. Press the [F2] key once the Fujitsu logo appears
on the screen. This will open the main menu
of the BIOS Setup Utility with the current
settings displayed.
3. Press the [RIGHT ARROW] or [LEFT ARROW] key
to scroll through the other setup menus to review or
alter the current settings.
Navigating Through The Setup Utility
The BIOS setup utility consists of seven menus; Main,
Advanced, Security, Power, Boot, Info and Exit. This
document explains each menu, including all submenus
and setup items.
The following procedures allow you to navigate the setup
utility menus:
1. To select a menu, use the cursor keys: [ ], [ ].
2. To select a field within a menu or a submenu, use the
cursor keys: [ ], [ ].
3. To select the different values for each field, press the
[Spacebar] or [+] to change to the next higher selec-
tion and [F5] or [-] to go to the next lower selection.
4. To activate a submenu press [Enter].
5. To return to a menu from a submenu, press [Esc].
6. To go to Exit menu from another menu, press [Esc].
7. Pressing the [F9] key resets all items in the BIOS to
the default values.
8. Pressing the [F10] key saves the current configura-
tion and exits the BIOS Setup Utility. You will be
asked to verify this selection before it is executed.
9. Pressing the [F1] key gives you a general help screen.
Entering the Setup Utility After a Configuration
Change or System Failure
If there has been a change in system configuration that
does not match the parameter settings stored in your
BIOS memory, or there is a failure in the system, the
system beeps and/or displays an error message after the
Power On Self Test (POST). If the failure is not severe, it
will give you the opportunity to modify the settings of
the setup utility, as described in the following steps:
1. When you turn on or restart the computer there is a
beep and/or the following message appears on the
screen:
Error message - please run SETUP
program Press <F1> key to continue,
<F2> to run SETUP
2. If an error message is displayed on the screen, and
you want to continue with the boot process and start
the operating system anyway, press the [F1] key.
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
POINTS
•Selecting a field causes a help message about that
field to be displayed on the right-hand side of the
screen.
•Pressing the Enter key with the highlight on a selec-
tion that is not a submenu or auto selection will cause
a list of all options for that item to be displayed.
Pressing the Enter key again will select the high-
lighted choice.
POINTS
If your settings require it, you may be asked for a
password before the operating system will be loaded.
3
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. Follow the instructions for
Navigating Through the Setup Utility to make any
changes.
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings and a description of
the field’s function and any special information needed
to help understand the field’s use.
Figure 1. Main Menu
POINT
System Time and System Date can also be set from your
operating system without using the setup utility. Use
the calendar and time icon on your Windows Control
Panel. When you change these settings from your desk-
top, the BIOS is automatically updated with the same
changes.
Menu Field Options Default Description
System Time: –— –— Sets and displays the current time. Time is in a 24 hour format of hours:
minutes: seconds with 2 digits for each. (HH:MM:SS). Example: 16:45:57. You
may change each segment of the time separately. Move between the segments
with the [Tab] key and/or [Shift] + [Tab] keys.
System Date: –— –— Sets and displays the current date. Date is in a month/day/year numeric format
with 2 digits each for month and day and 4 digits for year. (MM/DD/YYYY) for
example: 03/20/1998. You may change each segment of the date separately.
Move between the segments with the [Tab] key and/or [Shift] + [Tab] keys.
Primary
Master: Selects Primary
Master submenu –— Displays the type of device on this ATA/ATAPI interface, if there is one. Pressing
the Enter key selects the Primary Master submenu allowing additional device
configuration options for this interface.
Language: •English (US)
•Japanese (JP)
[English (US)] The default setting differs between the US/European and the Japanese model.
Selects the display language for the BIOS.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
▲
Item Specific Help
Adjust calendar clock.
<Tab>, <Shift-Tab>, or
<Enter> selects field.
System Time: [14:57:01]
System Date: [10/25/2002]
Primary Master [TOSHIBA MK3018GAP-(PM)]
Language: [English (US)]
Main Advanced Security Boot Info Exit
▲
Main Menu
4
LifeBook P Series Notebook BIOS
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies which ATA
devices are installed.
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may also be displayed.
Figure 2. Primary Master Submenu
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu
Field Options Default Description
Type: •Auto
•None
•CD-ROM
•Hard Disk
[Auto] (Note: There is no drop-down menu available for the Type field. To change
the options, use the plus ”+” and minus “-” keys or the spacebar.)
Selects the ATA/ATAPI device type. Select Auto to have the type automati-
cally identified by the BIOS at POST. If None is selected, all of the following
Set-up items do not appear. If Hard Disk is selected, you must specify the
number of Cylinders, Heads, and Sectors for the drive.
Cylinders: •A number between
0 and 65,535 –— This item appears only when the type is identified as Hard Disk. When Hard
Disk is selected, you can change the value. This field is changed by incre-
menting (pressing the [Spacebar]) or by typing in the number.
Heads: •A number between 1
and 16 –— This item appears only when the type is identified as Hard Disk. When Hard
Disk is selected, you can change the value. This field is changed by incre-
menting (pressing the [Spacebar]) or by typing in the number.
Sectors: •A number between
0 and 63 –— This item appears only when the type is identified as Hard Disk. When Hard
Disk is selected, you can change the value. This field is changed by incre-
menting (pressing the [Spacebar]) or by typing in the number.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
▲
Main Advanced Security Power Boot Info Exit
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Primary Master [FUJITSU MK3018GAP-(PM)]
Type: [Auto]
Maximum Capacity: 30006MB
Multi-Sector Transfers: [16 Sectors]
LBA Mode Control: [Enabled]
PIO Transfer Mode: [Fast PIO 4]
DMA Transfer Mode: [Ultra DMA 4]
5
Maximum
Capacity: •Display only –— Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Hard Disk is selected.
Multi-Sector
Transfers: •Disabled
•2 Sectors
•4 Sectors
•8 Sectors
•16 Sectors
•32 Sectors
•64 Sectors
•128 Sectors
[16 Sectors] This option cannot be changed when Auto is selected. Specify the number
of sectors per block for multiple sector transfer.
LBA Mode
Control: •Disabled
•Enabled
[Enabled] Enables or disables logical Block Addressing in place of Cylinder, Head, Sec-
tor addressing. This option cannot be changed when Auto is selected.
PIO Trans-
fer Mode: •Standard
•Fast PIO 1
•Fast PIO 2
•Fast PIO 3
•Fast PIO 4
[Fast PI0 4] Selects the method for moving data to/from the drive. Autotype the drive
to select the optimum transfer mode. This option cannot be changed when
Auto is selected. Multi-word DMA is automatically set to mode 1 for Fast
PIO 1, Fast PIO 2, Fast PIO 3, and set to mode 2 for Fast PIO 4 / DMA.
DMA
Transfer
Mode:
•Disabled
•Multiword DMA 1
•Multiword DMA 2
•Ultra DMA 0
•Ultra DMA 1
•Ultra DMA 2
•Ultra DMA 3
•Ultra DMA 4
[Ultra
DMA 4] Selects the method for moving data to/from the drive. Autotype the drive
to select the optimum transfer mode. This option cannot be changed when
Auto is selected.
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu
Field Options Default Description
Main Menu
6
LifeBook P Series Notebook BIOS
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
•Enable or disable support for Plug & Play
operating systems.
•Select between the display panel and an external
CRT display.
•Enable or disable compensation for your display.
•Configure PCI devices in your system.
•Configure CPU, USB, and miscellaneous features.
Follow the instructions for navigating through the setup
utility to make any changes.
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a descrip-
tion of the field’s function and any special information
needed to help understand the field’s use.
Figure 3. Advanced Menu
Table 3: Fields, Options and Defaults for the Advanced Menu
Menu Field Options Default Description
Plug & Play
O/S: •No
•Yes
[No] Select Yes if you are using a Plug & Play capable operating system.
Select No if you need the BIOS to configure non-boot devices.
Keyboard/Mouse
Features –— –— When selected, opens the Keyboard/Mouse Features submenu, which allows setting
external and internal keyboard and mouse parameters.
Video Features –— –— When selected, opens the Video Features submenu, which allows setting of the display
parameters, including routing of video signals to different displays.
Internal Device
Configurations –— –— When selected, opens the Internal Device Configurations submenu, which allows enabling
or disabling the Floppy Disk, IDE, and LAN Controllers. Note that if your system has a
wireless LAN installed, all fields may not be present.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Boot Info Exit
Item Specific Help
[No]
The BIOS configures
also non-boot devices.
Select if you are using
a non-Plug & Play OS or
a non-ACPI OS.
[Yes]
The BIOS configures
only boot devices.
▲ ▲ ▲ ▲
Plug & Play O/S: [No]
Keyboard/Mouse Features
Video Features
Internal Device Configurations
PCI Configurations
CPU Features
USB Features
Miscellaneous Configurations
Event Logging
▲▲
▲ ▲
7
PCI
Configurations –— –— When selected, opens additional menus to configure PCI devices.
CPU Features –— –— When selected, opens the CPU Features submenu, which allows enabling or disabling of
Processor Serial Number feature.
USB Features –— –— When selected, opens the USB Features submenu, which allows enabling or disabling
USB.
Miscellaneous
Configurations: –— –— When selected, opens the Miscellaneous Configurations submenu, which allows enabling
or disabling miscellaneous features, such as the power button.
Event Logging –— –— When selected, opens the event logging submenu.
Table 3: Fields, Options and Defaults for the Advanced Menu
Menu Field Options Default Description
Advanced Menu
8
LifeBook P Series Notebook BIOS
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and
keyboard.
.
Figure 4. Keyboard/Mouse Features Submenu
Table 4: Fields, Options and Defaults for the Keyboard/Mouse Features Submenu of the Advanced Menu
Menu Field Options Default Description
Numlock: •Auto
•On
•Off
[Auto] Sets the NumLock function state when the computer
completes booting.
Internal Pointing
Device: •Manual Setting
•Always Enabled
•Always Disabled
[Manual Setting] Configures the internal pointing device. When Manual Setting is
selected, the internal pointing device can be enabled or disabled by
using the [Fn] + [F4] keys. When Always Enabled is selected, the
internal device is always selected. When Always Disabled is
selected, the internal pointing device cannot be used.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
PhoenixBIOS Setup Utility
Select power-on state
for Numlock.
Keyboard/Mouse Features
Numlock:
Internal Pointing Device:
[Auto]
[Manual Setting]
9
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the display parameters.
Figure 5. Video Features Submenu
Table 5: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field Options Default Description
Display: •Internal Flat-Panel
•External
•Simultaneous
[Internal Flat-Panel] Selects where the video signal will be routed.
Compensation: •Disabled
•Enabled
[Enabled] Enables or disables compensation which controls spacing on the
display. When enabled, displays with less than pixel resolution
800 x 600 will still cover the entire screen.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
Select display terminal.
Video Features
Display [Internal Flat Panel]
Compensation: [Enabled]
PhoenixBIOS Setup Utility
Advanced Menu
10
LifeBook P Series Notebook BIOS
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configurations submenu allows the user to configure other internal devices.
Figure 6. Internal Device Configurations Submenu
Table 6: Fields, Options and Defaults for the Internal Device Configurations Submenu of Advanced Menu
Menu Field Options Default Description
IDE Controller: •Disabled
•Enabled
[Enabled] Enables or disables selected IDE controller.
LAN Controller: •Disabled
•Enabled
•Auto
[Auto] When Disabled is selected, the LAN device is disabled.
When Enabled is selected, the LAN device is enabled.
When Auto is selected, the LAN is always enabled when the system
is connected to an AC Adapter; when running on battery power,
the device is enabled only when the link is active.
Note that if your system has a wireless LAN installed, all fields may
not be present.
Touch Panel: •Disabled
•Enabled
[Enabled] Enables or disables touch panel.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
[Disabled]
IDE port is disabled.
[Enabled]
IDE port is enabled.
Internal Device Configurations
PhoenixBIOS Setup Utility
IDE Controller: [Enabled]
LAN Controller: [Auto]
Touch Panel: [Enabled]
11
PCI Configurations Submenu of the Advanced Menu
The PCI Configurations submenu allows the user to reserve specific interrupts (IRQs) for legacy ISA devices, and to
enable or disable built in PCI device modules.
Figure 7. PCI Configurations Submenu
Table 7: Fields, Options and Defaults for the PCI Configurations Submenu of the Advanced Menu
Menu Field Options Default Description
IRQ Reservation –— –— Reserve specific IRQs for use by legacy ISA devices.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
Reserve specific IRQs
for use by legacy ISA
devices.
PCI Configurations
IRQ Reservation
PhoenixBIOS Setup Utility
▲
Advanced Menu
12
LifeBook P Series Notebook BIOS
IRQ Reservation Submenu of the PCI Configurations Submenu
The IRQ Reservation submenu of the PCI Configurations submenu allows the user to mark various IRQs as reserved for
use by legacy ISA devices. When an IRQ is reserved, the BIOS does not use it for embedded PCI or ISA devices.
Figure 8. IRQ Reservation Submenu
Table 8: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configurations Submenu
Menu Field Options Default Description
IRQ 3: •Available
•Reserved
[Available] Reserves IRQ 3. If Reserved is selected, BIOS reserves IRQ 3 for use by
legacy ISA devices and does not use it for embedded PCI/ISA devices.
IRQ 3 is removed from the IRQ bitmap in the PCI IRQ routing table.
IRQ 4: •Available
•Reserved
[Available] Reserves IRQ 4.
IRQ 5: •Available
•Reserved
[Available] Reserves IRQ 5.
IRQ 7: •Available
•Reserved
[Available] Reserves IRQ 7.
IRQ 9: •Available
•Reserved
[Available] Reserves IRQ 9.
IRQ 10: •Available
•Reserved
[Available] Reserves IRQ 10.
IRQ 11: •Available
•Reserved
[Available] Reserves IRQ 11.
IRQ 15: •Available
•Reserved
[Available] Reserves IRQ 15.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
Reserve the specified
IRQ for use by legacy
ISA devices.
IRQ Reservation
PhoenixBIOS Setup Utility
IRQ 3: [Available]
IRQ 4: [Available]
IRQ 5: [Available]
IRQ 7: [Available]
IRQ 9: [Available]
IRQ 10: [Available]
IRQ 11: [Available]
IRQ 15: [Available]
13
CPU Features Submenu of the Advanced Menu
The CPU Features submenu configures certain features of the CPU in the system.
Figure 9. CPU Features Submenu
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field Options Default Description
Processor Serial
Number: •Enabled
•Disabled
[Disabled] Enables or disables the Processor Serial Number feature of the
processor.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
Configures Processor
Serial Number feature.
[Disabled]
Processor Serial Number
feature is disabled.
[Enabled]
Processor Serial Number
feature is enabled.
CPU Features
PhoenixBIOS Setup Utility
Processor Serial Number: [Disabled]
Advanced Menu
14
LifeBook P Series Notebook BIOS
USB Features Submenu of the Advanced Menu
The USB Features submenu configures the USB capabilities of the system.
Figure 10. USB Features Submenu
Table 10: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu
Menu Field Options Default Description
USB Storage
Device: •Disabled
•Enabled
[Enabled] When enabled, Legacy Storage Device Emulation is enabled and
USB floppy and/or CD-ROM are available without USB-aware OS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
[Disabled]
Legacy Storage Device
Emulation is disabled.
[Enabled]
Legacy Storage Device
Emulation is enabled.
USB floppy and/or USB
CD-ROM are available
without USB aware OS.
USB Features
PhoenixBIOS Setup Utility
USB Storage Device: [Enabled]
15
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations submenu is for setting up certain miscellaneous system features.
Figure 11. Event Logging Submenu
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu
Menu Field Options Default Description
Power Button: •Disabled
•Power Off
[Disabled] When Disabled is selected, the power button does not control
power. When Power Off is selected, pressing the power button
shuts off power to the system.
Wake up on LAN: •Disabled
•Enabled
[Disabled] When this feature is Enabled, the system will wake up when
the internal LAN device receives a Magic Packet while in
Power-Off state.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
Configures the power
button.
*ACPI OS ignores this
setting.
Miscellaneous Configurations
PhoenixBIOS Setup Utility
Power Button: [Disabled]
Wake up on LAN: [Disabled]
Advanced Menu
16
LifeBook P Series Notebook BIOS
Event Logging Submenu of the Advanced Menu
The Event Logging submenu is for setting up the logs for DMI event logging.
Figure 12. Event Logging Submenu
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field Options Default Description
Event Log Capacity: --- Space Available Display only
Event Log Validity: --- Valid Display only
View Event Log: •Enter [Enter] Allows you to view content of event log.
Event Logging: •Disabled
•Enabled
[Enabled] Turns event logging on and off for all DMI events.
System Boot
Event: •Disabled
•Enabled
[Disabled] Turns event logging on and off for DMI system boot events.
Clear All Event Logs: •No
•Yes
[No] When set to [Yes] all event logs will be cleared at next boot.
Mark Events as Read: •Enter [Enter] Allows you to make all events currently in the event log as read.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
Press <Enter> key to
view the contents of
the event log.
Event Logging
PhoenixBIOS Setup Utility
Event Log Capacity: Space Available
Event Log Validity: Valid
View Event Log: [Enter]
Event Logging: [Enabled]
System Boot Event: [Disabled]
Clear All Event Logs: [No]
Mark Events as Read: [Enter]
17
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs and
to view the current data security configuration. Follow
the instructions for Navigating Through the Setup Utility
to make any changes.
The following tables show the names of the menu fields
for the Security menu and its submenus, the options for
each field, the default settings and a description of the
field's function and any special information needed to
help understand the field's use. The default condition is
no passwords required and no write protection.
Figure 13. Security Menu
POINT
If you set a password, write it down and keep it in a
safe place. If you forget the password you will have to
contact your support representative to regain access to
your secured functions and data.
POINTS
•If you make an error when re-entering the password
a [Warning] will be displayed on the screen. To try
again, press the Enter key and then retype the pass-
word. Press the Esc key to abort the password setting
process.
•Entering a password incorrectly three times in a row
will cause the keyboard and mouse to be locked out
and the warning [System Disabled] to be displayed. If
this happens, restart the computer by turning off and
on the power with the power switch and use the
correct password on reboot.
•If the Password on Resume is Enabled and the Pass-
word on Boot is Disabled you will not have to type
your password upon resuming the system from the
Suspend or Save-to-Disk modes. Power Management
Security will work only if Password on Boot is
enabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Boot Info Exit
Item Specific Help
Press <Enter> key to
set Supervisor password
to enable any password
features.
Then password entry is
required to enter BIOS
Setup.
PhoenixBIOS Setup Utility
Supervisor Password Is: Clear
User Password Is: Clear
Set Supervisor Password [Enter]
Set User Password [Enter]
Minimum User Password Length [0]
Password on Boot: [Disabled]
Password on Resume: [Disabled]
Boot from Removable Media: [All]
Floppy Disk Access: [All]
Hard Disk Security
Owner Information
Hard Disk Boot Sector: [Normal]
▲▲
Security Menu
18
LifeBook P Series Notebook BIOS
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
Table 13: Fields, Options and Defaults for the Security Menu
Menu Field Options Default Description
Supervisor
Password is: –— Clear A display-only field. Set is displayed when the system supervisor pass-
word is set and Clear when it is not.
User Password is: –— Clear A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
Set Supervisor
Password –— [Enter] Sets, changes or cancels the Supervisor Password. The Supervisor
Password may be up to seven characters long and must include only
letters or numbers (no symbols). Passwords are NOT case-sensitive. To
cancel a password press the Enter key instead of entering characters in
the Enter New Password field and in the Re-enter New Password field.
When a Supervisor Password is set it must be used to access the BIOS
setup utility.
Set User Password –— [Enter] Can only be accessed if Supervisor Password is set. Sets, changes or
cancels the User Password. The User Password may be up to seven
characters long and must include only letters or numbers (no symbols).
Passwords are NOT case-sensitive. To cancel a password press the
Enter key instead of entering characters in the Enter New Password
field and in the Re-enter New Password field. When a User Password is
set it must be used to access the BIOS setup utility.
Minimum User
Password Length: –— [0] –—
Password on Boot: •Disabled
•First Boot
•Every Boot
[Disabled] When set to Disabled, no password is required. When set to First Boot,
password entry required only before first boot. When Every Boot is
selected, password required whenever the system is booted.
Password On Resume: •Disabled
•Enabled
[Disabled] When Enabled, PS/2 keyboard and mouse inputs are locked out upon
Resume From Suspend or Save-to-Disk until entering password.
Boot from Removable
Media: •All
•Supervisor only
[All] When Supervisor Only is selected, only the Supervisor can boot from
removable media. Only the user who enters the Supervisor Password
before OS boot is treated as the Supervisor. When All is selected, boot
from removable media is not restricted.
Floppy Disk Access: •All
•Supervisor only
[All] When Supervisor Only is selected, only the Supervisor can access the
floppy disk. Only the user who enters the Supervisor Password before
OS boot is treated as the Supervisor. When All is selected, floppy disk
access is not restricted.
Hard Disk Security: –— –— Configures hard disk security features.
Owner Information: –— –— Sets Owner information.
Hard Disk
Boot Sector: •Normal
•Write Protected
[Normal] Sets protection mode for hard disk drive.
19
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Figure 14. Hard Disk Security Submenu
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options Default Description
Primary Master: •Disabled
•Enabled
[Disabled] Disabled: No password protection.
Enabled: Hard drive is locked with the password. Data in the locked
disk cannot be read on any systems other than the original system
on which it was locked, or on systems that have the identical pass-
word setting.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
PhoenixBIOS Setup Utility
Hard Disk Security
Primary Master: [Disabled]
Security Menu
20
LifeBook P Series Notebook BIOS
Owner Information Submenu of the Security Menu
The Owner Information submenu is for setting owner information.
Figure 15. Owner Information Submenu
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field Options Default Description
Owner Information Is: –— Clear Display only.
Set Owner
Information: –— [Enter] Field to write owner
information, i.e. name.
Foreground Color: •Black
•Blue
•Green
•Cyan
•Red
•Magenta
•Brown
•White
•Gray
•Light Blue
•Light Green
•Light Cyan
•Light Red
•Light Magenta
•Light Yellow
•Bright White
[Gray]
Background Color: •Black
•Blue
•Green
•Cyan
•Red
•Magenta
•Brown
•White
•Gray
•Light Blue
•Light Green
•Light Cyan
•Light Red
•Light Magenta
•Light Yellow
•Bright White
[Black]
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
▲
Item Specific Help
Main Advanced Security Power Boot Info Exit
Owner Information Is: Clear
Set Owner Information [Enter]
Foreground Color: [Gray]
Background Color: [Black]
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
Fujitsu P1120 is a notebook computer that offers a range of capabilities to enhance your productivity and user experience. With its advanced features, it is well-suited for a variety of tasks, including work, education, and personal use.
Here are some key capabilities of the Fujitsu P1120:
Device Control and Customization:
- You can customize the operating environment of your notebook through the BIOS Setup Utility. This utility allows you to configure device control features, such as changing I/O addresses and boot devices, to suit your specific needs.
Comprehensive System Security:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Fujitsu Siemens Computers Laptop i Series User manual
-
-
-
-
-
-
-
-
-