Denon AH-MM300 is a dynamic type of headphones with 40 Ø mm driver units. It has an impedance of 32 ohms and a sensitivity of 96 dB/mW. The maximum input is 1,000 mW and the playback frequency ranges from 10 to 40,000 Hz. It weighs 195 grams (excluding cable). The remote and mic are supported by all models of iPod, iPhone, and iPad (not all models support volume up/down functions). Audio is supported by all iPod models. Requires software version 1.0.3 for iPod nano (4th generation), 2.0.1 for iPod classic (120GB), and 2.2 or later for iPod touch (2nd generation).
Denon AH-MM300 is a dynamic type of headphones with 40 Ø mm driver units. It has an impedance of 32 ohms and a sensitivity of 96 dB/mW. The maximum input is 1,000 mW and the playback frequency ranges from 10 to 40,000 Hz. It weighs 195 grams (excluding cable). The remote and mic are supported by all models of iPod, iPhone, and iPad (not all models support volume up/down functions). Audio is supported by all iPod models. Requires software version 1.0.3 for iPod nano (4th generation), 2.0.1 for iPod classic (120GB), and 2.2 or later for iPod touch (2nd generation).
Denon AH-MM300 is a dynamic type of headphones with 40 Ø mm driver units. It has an impedance of 32 ohms and a sensitivity of 96 dB/mW. The maximum input is 1,000 mW and the playback frequency ranges from 10 to 40,000 Hz. It weighs 195 grams (excluding cable). The remote and mic are supported by all models of iPod, iPhone, and iPad (not all models support volume up/down functions). Audio is supported by all iPod models. Requires software version 1.0.3 for iPod nano (4th generation), 2.0.1 for iPod classic (120GB), and 2.2 or later for iPod touch (2nd generation).
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI