Z-150 Bracket In-swing doors
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-Z-150 Ver. E Published on 2011.09.08
Unit:mm
Application of Electromagnet:10003F
21
6 Finish
4
5
3
Power
1
80
38
6
40
6
4
8
3
0
1
8
0
24
170
32
Installation of Z bracket on In-swing Doors
Install the electromagnet on
the door frame. Make sure
t h e d o o r m a y b e
opened/closed.
Assemble Z bracket. Make
sure it is still loose.
Insert the guide pins into the
armature plate.
Fasten the armature plate to
Z bracket. Insert the rubber
washer between them.
Close the door and turn on
the power.
Let the armature plate and
electromagnet bond together.
Press Z bracket to the door
leaf and fasten it.
Minimal:32mm
Z-Bracket
In-swing
Frame
Door
Armature
Plate
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886 -2 2267 9876
E-Mail: inquiry@gianni.com.tw
Website: gianni.tw
-
1
Gianni Industries GEM Z-150 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Gianni Industries 10001N series User manual
-
-
-
Gianni Industries 10020 User manual
-
-
GEM L-150 Bracket Operating instructions
-
-
-
-