jbc AL250 User manual

Brand: jbc

Model: AL250

Category: Soldering irons

Type: User manual

The JBC AL250 soldering iron is a versatile tool for various soldering applications. It features a temperature range of 90°C to 450°C, allowing you to work with different solder types and components. The quick heating and recovery times ensure efficient and precise soldering. The AL250 is compatible with a wide range of cartridges, providing flexibility for different tasks. It also offers safety features such as an equipotential connection to prevent electrostatic discharge and a stand to place the iron when not in use.

The JBC AL250 soldering iron is a versatile tool for various soldering applications. It features a temperature range of 90°C to 450°C, allowing you to work with different solder types and components. The quick heating and recovery times ensure efficient and precise soldering. The AL250 is compatible with a wide range of cartridges, providing flexibility for different tasks. It also offers safety features such as an equipotential connection to prevent electrostatic discharge and a stand to place the iron when not in use.

AL250

SOLDERING IRON

www.jbctools.com

2

AL250 / SOLDERING IRON

AL250-B

SOLDERING IRON

INSTALLATION

AL250-B

SOLDERING IRON

MANUAL

AL-2A / AL-1A

AL-9A / AL-2AA

SOLDER FEED

STATION

AL-SD

STAND

Power cord

socket

Equipotential

connection

0964551

Pedal

(optional)

AL250

SOLDERING IRON

ww w. j bcto o l s.c o m

3

CHANGING THE HANDPIECE’S CARTRIDGE

ACCESSORIES AL-IA

HANDS-FREE SOLDERING

ARM AND FUME

EXTRACTOR

F4468

FUME EXTRACTOR

- Loosen the cartridge screw (1) to release the cartridge.

- Place the cartridge in the solder feed handle.

Important: It is essential to insert the cartridge till the end for a good connection.

Use the mark as reference.

- Align the tip of the cartridge with the solder guide tube (2). Tighten the cartridge screw (1).

- You must leave a gap of 8-10 mm between cartridge tip and the end of the guide tube (4). Loosen the

guide screw (3). Adjust the guide tube and tighten screw (3).

Cartridge screw

Guide tube screw

Alignment

1

4

3

2

8-10 mm

WARRANTY

JBC’s 2 years warranty guarantees this equipment against all manu-

facturing defects, covering the replacement of defective parts and

all necessary labour.

Warranty does not cover product wear due to use or mis-use.

In order for the warranty to be valid, equipment must be returned,

postage paid, to the dealer where it was purchased enclosing this

fully ﬁlled in, sheet.

www.jbctools.com

SERIAL Nº

STAMP OF DEALER

DATE OF PURCHASE

0012317-0213

This product should not be

thrown in the garbage.

All the cartridges shown are

actual size.

Consult our wide range of

cartridges with more than

300 references in

www.jbctools.com

For special cartridges

contact with our distributor.

C250 CARTRIDGE RANGE

ø 0,6

1,8x0,8

ø 0,8

4,8x1,5

1,2x0,7

3,2x1,5

ø 2,2

2,2 x 1

1,2x0,7

2,2x1

4,8x1,5

ø 2,2

ø 3,8

2,2x1

ø 1,7

ø 1

C250-401

C250-405C250-402 C250-406C250-403 C250-412

C250-404

C250-418C250-409 C250-410

C250-413C250-407 C250-408 C250-411

C250-414 C250-415

1
2
3
4

jbc AL250 User manual

Brand: jbc

Model: AL250

Category: Soldering irons

Type: User manual

The JBC AL250 soldering iron is a versatile tool for various soldering applications. It features a temperature range of 90°C to 450°C, allowing you to work with different solder types and components. The quick heating and recovery times ensure efficient and precise soldering. The AL250 is compatible with a wide range of cartridges, providing flexibility for different tasks. It also offers safety features such as an equipotential connection to prevent electrostatic discharge and a stand to place the iron when not in use.

Related papers

Other documents