2. Ricoh
  3. Aficio SG 3110DN
Aficio SG 3110DN

Ricoh Aficio SG 3110DN Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Ricoh Aficio SG 3110DN Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DO NOT INSTALL THE RICOH (OEM) INKS THAT WERE PROVIDED WITH THE PRINTER.
DO NOT POWER ON THE PRINTER BEFORE INSTALLING SAWGRASS CHROMABLAST-R INK CARTRIDGES.
DURING DOWNTIME, IT IS HIGHLY RECOMMENDED TO LEAVE THE PRINTER POWERED ON TO ALLOW
THE RICOH AUTOMATIC MAINTENANCE UTILITIES TO KEEP THE PRINT HEAD NOZZLES CLEAR.
CAUTION
Ricoh SG 3110DN
INSTALLATION GUIDE
MacProle
MAC OS X
v20120509
SECTIONS:
Macintosh Operating System Verication (1 page)
Ricoh (OEM) Driver Download & Installation (7 pages)
MacProle Installation & Registration (8 pages)
Note: If you experience any communication errors, a powered USB hub may be required.
During downtime, it is HIGHLY RECOMMENDED to leave the printer powered ON to allow the Ricoh Automatic
Maintenance Utilities to keep the print head nozzles clear. The Ricoh GELJET has been engineered to perform
automatic maintenance at various times in an effort to keep the print head nozzles in top condition. If this mainte-
nance cannot be automatically performed, it is possible that the nozzles may suffer permanent effects. As a result,
head cleanings may be unable to restore the print head to optimal operation.
CAUTION
PAGE 1 of 1 >>
Ricoh SG 3110DN – Installation Guide
Macintosh OS Verication
1.) To check the version of your Mac OS, rst click the Apple icon in the top left corner of your desktop.
Then scroll down and click About This Mac. The following screen containing the version number should
appear (see FIGURE 1). The below example is running Version 10.6.4. Please note your version number
and remember to only download those utilities which correspond with your version of Mac OS.
FIGURE 1
1
3
2
Before you begin, you will need to verify your version of Mac OS. This is important when deciding
which driver to download. You should only download drivers which are compatible with your version
of Mac OS.
Ricoh SG 3110DN – Installation Guide
Ricoh (OEM) Driver Download & Installation
PAGE 1 of 7 >>
The following instructions will demonstrate how to install the Ricoh (OEM) printer driver on computers
running Macintosh OS.
FIGURE 1
FIGURE 2
1.) Before installing the ChromaBlast-R SG 3110DN MacProle, you will need to install the Ricoh (OEM)
printer driver. First, access the Ricoh website by entering www.ricoh.co.uk in the address eld of your
web browser. Once there, click the Downloads tab (see FIGURE 1).
2
1
2.) Select Office Products Downloads (see FIGURE 2).
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
Ricoh (OEM) Driver Download & Installation
PAGE 2 of 7>>
FIGURE 3
FIGURE 4
3.) Select Acio SG 3110DN from the Printers drop down box and click GO (see FIGURE 3).
2
1
4.) Select the link to Download le from external website (see FIGURE 4).
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
Ricoh (OEM) Driver Download & Installation
PAGE 3 of 7>>
FIGURE 5
6.) Locate the RPCS Raster Driver for your Operating System and click the Download Icon
(see FIGURE 6).
FIGURE 6
5.) Locate and click the link for your Operating System (see FIGURE 5).
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
Ricoh (OEM) Driver Download & Installation
PAGE 4 of 7>>
FIGURE 9
8.) Click Continue to allow the program to determine if the software can be installed (see FIGURE 9).
FIGURE 8 FIGURE 7
1
3
7.) Once the driver download has completed, click the download icon in the bottom right corner of your
desktop (see FIGURE 7 > 1). Next, double-click the r53405L4.dmg le (see FIGURE 7 > 2). The
Ricoh_AcioSG3110DN window should now appear (see FIGURE 8). Finally, double-click the Ricoh_
AcioSG3110DN icon to begin the Ricoh (OEM) printer driver installation process (see FIGURE 8 > 3).
2
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
Ricoh (OEM) Driver Download & Installation
PAGE 5 of 7>>
FIGURE 11
10.) In the License window, read the terms of the Software License Agreement and click Continue when
nished (see FIGURE 11).
FIGURE 10
9.) In the Introduction window, click Continue (see FIGURE 10).
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
Ricoh (OEM) Driver Download & Installation
PAGE 6 of 7>>
FIGURE 13
12.) In the Destination window, select the hard drive on which the printer driver will be installed and click
Continue (see FIGURE 13).
FIGURE 12
11.) If you agree with the terms of the Software License Agreement, click Agree (see FIGURE 12).
1
2
PAGE 7 of 7 >>
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
Ricoh (OEM) Driver Download & Installation
FIGURE 15
Congratulations! The Ricoh (OEM) printer driver has successfully been installed. Please proceed to the
ChromaBlast-R Ricoh SG 3110DN MacProle Installation section.
14.) Once installation has completed successfully, click Close to nish installing the software (see
FIGURE 15).
FIGURE 14
13.) Ensure you have a sufficient amount of disk space free to install the printer driver and click Install
(see FIGURE 14).
Ricoh SG 3110DN – Installation Guide
MacProle Installation & Registration
PAGE 1 of 8 >>
The following instructions will demonstrate how to download, install, and register the ChromaBlast-R
SG 3110DN MacProle on computers running Macintosh OS.
1.) Download the MacProle by accessing the Sawgrass Europe website by entering
www.sawgrasseurope.com in the address eld of your web browser.
2
3
1
4
2.) Navigate to: Technical Support > ChromaBlast-R Technical Support > ICC Proles and click on the
Ricoh SG 3110DN ICC Prole download link and save the le to your desktop: (see FIGURE 2).
FIGURE 1
PAGE 2 of 8 >>
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
MacProle Installation & Registration
3
FIGURE 4 FIGURE 3
1
3.) Once the download has completed, click the download icon in the bottom right corner of your desktop
(see FIGURE 3 > 1). Next, double-click the ChromaBlast-R SG3110DN.dmg le (see FIGURE 3
> 2). The Sawgrass Installer window should now appear (see FIGURE 4). Finally, double-click the
ChromaBlast-R SG3110DN.pkgle to begin the installation process (see FIGURE 4 > 3).
2
FIGURE 5
4.) Click Continue to allow the program to determine if the software can be installed and to begin the
installation process (see FIGURE 5).
PAGE 3 of 8 >>
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
MacProle Installation & Registration
FIGURE 6
6.) The following instructions will show how to register Online. Note the Product ID as this will be required
during the registration process and click Get Registration Code (see FIGURE 6).
5.) You will use the Product ID to register your product. The Product ID is located in the MacProle
Registration window (see FIGURE 6). The easiest and fastest way to obtain a Registration Code 24/7
is by clicking the Get Registration Code button also located in the MacProle Registration window.
Follow the on-screen instructions to receive a Registration Code via an automatic E-mail.
Note: You must have a separate Registration Code for every machine on which the MacProfile is
installed.
1 2
PAGE 4 of 8 >>
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
MacProle Installation & Registration
FIGURE 7
FIGURE 8
1
2
7.) On the Product Registration web page, ll in the required information and click Submit when complete
(see FIGURE 7). Your Registration Code will now be sent to the e-mail address used during registration.
8.) Once you have received the Registration Code, enter it into the Registration Code eld and click Apply
Registration Code (see FIGURE 8).
PAGE 5 of 8 >>
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
MacProle Installation & Registration
FIGURE 10
FIGURE 9
9.) You should receive the following screen informing you that registration completed successfully (see
FIGURE 9). Click OK to continue.
10.) I n the Introduction window, click Continue (see FIGURE 10).
FIGURE 11
11.) I n the Important Information window, click Continue (see FIGURE 11).
PAGE 6 of 8 >>
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
MacProle Installation & Registration
FIGURE 13
13.) If you agree with the terms of the Software License Agreement, click Agree (see FIGURE 13).
FIGURE 12
12.) In the License window, read the terms of the Software License Agreement and click Continue when
nished (see FIGURE 12).
PAGE 7 of 8 >>
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
MacProle Installation & Registration
14.) In the Destination window, select the hard drive on which the MacProle will be installed and click
Continue (see FIGURE 14).
FIGURE 14
1
2
FIGURE 15
15.) In the Destination window, click Install to place the ChromaBlast-R MacProle in the specied folder
(see FIGURE 15). To install the ChromaBlast-R MacProle in a different folder, click Change Install
Location and browse to the desired folder.
PAGE 8 of 8 >>
ChromaBlast-R: Ricoh SG 3110DN – Installation Guide
MacProle Installation & Registration
FIGURE 16
Congratulations! The ChromaBlast-R Ricoh SG3110DN MacProle has successfully been installed. Please
proceed to the Print Setup Guide that corresponds with your version of graphics software.
16.) You should receive the following screen informing you that installation has completed successfully. Click
Close to nalize installation of the ChromaBlast-R SG3110DN MacProle (see FIGURE 16).
/