UPG UB3L-A User guide

Kinetik is a registered trademark of Universal Power Group, Inc.

Exhaust

Before lling, ensure your new battery is the correct size for your vehicle. Once the battery is lled, it cannot be returned to vender.

Only use the acid pack that comes with your battery.

Fill all cells to the "FULL" mark and wait 30 minutes.

After 30 minutes, any cell that has settled below the "FULL" mark should be topped o to the "FULL" mark.

Replace the sealer caps before charging the battery.

488 S. Royal Lane Coppell, Texas 75019 P 469.892.1122 T 866.892.1122 F 469.892.1123 sales@upgi.com

F1623-1

Warranty

14.8 V @ 25 C

1 Year Full Replacement

L: 3.86” (98.0 mm) W: 2.20” (56.0 mm) H: 4.17” (106 mm)

www.kinetikpower.com

3 Ah

12 Volts

2.87 lbs. (1.30 kgs)

0.3 A

Maximum Charging Voltage

All specications are subject to change without notice.

Specification

Filling Instructions

Physical Dimensions: in (mm)

Due to continuous improvements to our products, product may vary slightly from depiction.

Equivalent to YB3L-A

UPG No. 42501

HIGH PERFORMANCE CONVENTIONAL

AP SERIES

POWERSPORTS BATTERIES