Adlink cPCI-6640 Series Owner's manual

Brand: Adlink

Model: cPCI-6640 Series

Category: Motherboards

Type: Owner's manual

Leading EDGE COMPUTING

Manual Rev.: 1.0

Revision Date: March 27, 2023

Part Number: 50M-00112-1000

cPCI-6640

Performance 6U CompactPCI®

8th/9th Gen Intel® Core™ i7/i5/i3 Processor Blade

User’s Manual

ii Revision History

Leading EDGE COMPUTING

Revision History

Revision Release Date Description of Change(s)

1.0 2023-03-27 Initial release

Preface iii

cPCI-6640

Preface

This document contains proprietary information protected by copy-

right. All rights are reserved. No part of this manual may be repro-

duced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior

notice in order to improve reliability, design, and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-

cial, incidental, or consequential damages arising out of the use or

inability to use the product or documentation, even if advised of

the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsi-

bility to global environmental preservation

through compliance with the European Union's

Restriction of Hazardous Substances (RoHS)

directive and Waste Electrical and Electronic

Equipment (WEEE) directive. Environmental

protection is a top priority for ADLINK. We have

enforced measures to ensure that our products,

manufacturing processes, components, and raw

materials have as little impact on the environment as possible.

When products are at their end of life, our customers are encour-

aged to dispose of them in accordance with the product disposal

and/or recovery programs prescribed by their nation or company.

Battery Labels (for products with battery)

ᑜ㔚ᳰ⺧࿁ᡴ

iv Preface

Leading EDGE COMPUTING

California Proposition 65 Warning

WARNING: This product can expose you to chemicals

including acrylamide, arsenic, benzene, cadmium,

Tris(1,3-dichloro-2-propyl)phosphate (TDCPP),

1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP,

PVC, and vinyl materials, which are known to the State of Califor-

nia to cause cancer, and acrylamide, benzene, cadmium, lead,

mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP,

PVC, and vinyl materials, which are known to the State of Califor-

nia to cause birth defects or other reproductive harm. For more

information go to www.P65Warnings.ca.gov.

Trademarks

Product names mentioned herein are used for identification pur-

poses only and may be trademarks and/or registered trademarks

of their respective companies.

Conventions

Take note of the following conventions used throughout this

manual to make sure that users perform certain tasks and

instructions properly.

NOTE:

Additional information, aids, and tips that help users perform

tasks.

CAUTION:

Information to prevent minor physical injury, component dam-

age, data loss, and/or program corruption when trying to com-

plete a task.

WARNING:

Information to prevent serious physical injury, component

damage, data loss, and/or program corruption when trying to

complete a specific task.

Table of Contents v

cPCI-6640

Table of Contents

Revision History...................................................................... ii

Preface .................................................................................... iii

List of Figures ....................................................................... vii

List of Tables.......................................................................... ix

1 Introduction ........................................................................ 1

1.1 Overview.............................................................................. 1

1.2 Features............................................................................... 2

1.3 Package Contents ............................................................... 3

2 Specifications..................................................................... 5

2.1 cPCI-6640 Processor Blade Specifications ......................... 5

2.2 Block Diagrams.................................................................... 7

2.3 I/O Connectivity Table ......................................................... 8

2.4 Power Requirements ........................................................... 9

3 Board Interfaces............................................................... 11

3.1 cPCI-6640 Board Layout ................................................... 11

3.2 cPCI-6640 Front Panel ...................................................... 13

3.3 Connector Pin Assignments .............................................. 14

3.4 Jumpers and Switches....................................................... 22

4 Getting Started ................................................................. 23

4.1 CPU and Heatsink ............................................................. 23

4.2 CFast Card Installation ...................................................... 24

4.3 2.5" SATA Drive Installation............................................... 26

4.4 Installing the cPCI-6640 to the Chassis............................. 29

4.5 Power Sequence ............................................................... 30

vi Table of Contents

Leading EDGE COMPUTING

5 Driver Installation.............................................................. 33

5.1 cPCI-6640 Drivers.............................................................. 33

6 BIOS Setup Utility ............................................................. 35

6.1 Starting the BIOS ............................................................... 35

6.2 Main Setup......................................................................... 37

6.3 Advanced ........................................................................... 40

6.4 Chipset............................................................................... 48

6.5 Security .............................................................................. 57

6.6 Boot ................................................................................... 58

6.7 Save & Exit ........................................................................ 59

Important Safety Instructions............................................... 61

Getting Service ...................................................................... 63

List of Figures vii

cPCI-6640

List of Figures

Figure 2-1: cPCI-6640 Processor Blade Functional Block Diagram .. 7

Figure 3-1: cPCI-6640 Board Layout ............................................... 12

Figure 3-2: cPCI-6640 Front Panel Layout ...................................... 13

viii List of Figures

Leading EDGE COMPUTING

This page intentionally left blank.

List of Tables ix

cPCI-6640

List of Tables

Table 2-1: cPCI-6640 Processor Blade Specifications ..................... 5

Table 2-2: cPCI-6640 I/O Connectivity ............................................. 8

Table 3-1: cPCI-6640 Front Panel System LED Descriptions ........ 13

Table 3-2: RJ-45 GbE Pin Definitions ............................................. 14

Table 3-3: LAN LED Status Definitions........................................... 14

Table 3-4: COM DB-9 Pin Definition............................................... 15

Table 3-5: COM Pin Header Definition ........................................... 15

Table 3-6: USB 3.0 Pin Definition ................................................... 16

Table 3-7: Serial ATA Connector with Power Pin Definition ........... 17

Table 3-8: CFast Socket Pin Definition ........................................... 18

Table 3-9: DVI-I Connector Pin Definition....................................... 19

Table 3-10: CompactPCI J1 Connector Pin Definition...................... 20

Table 3-11: CompactPCI J2 Connector Pin Definition...................... 21

Table 3-12: RTC Reset..................................................................... 22

Table 3-13: ME Lock Jumper Settings.............................................. 22

xList of Tables

Leading EDGE COMPUTING

This page intentionally left blank.

Introduction 1

cPCI-6640

1 Introduction

1.1 Overview

The ADLINK cPCI-6640 is a 6U CompactPCI® processor blade

featuring an 8th/9th Gen Intel® Core™ (formerly Coffee Lake-H)

with Mobile Intel® CM246 Chipset. Dual SO-DIMM slots provide

up to 64GB of DDR4-2666 dual-channel memory (2x 32GB mod-

ules). ECC memory is also available when paired with a support-

ing CPU.

The cPCI-6640 processor blade comes in dual-slot (8HP) width

form factor. Front panel I/O for the cPCI-6640 includes 2x DVI-D,

8x GbE (2x configurable as PoE ports by BOM option), 6x USB

3.0 ports, and 2x RS232 serial ports.

Graphics support is integrated on the CPU and supports 2 inde-

pendent displays. Storage includes a CFAST slot and a 22-pin

direct connector for 2.5" SATA 6Gb/s drive.

The cPCI-6640 offers outstanding performance provided by the

Intel® processor, and is an ideal solution for military, aerospace,

transportation and other industrial applications that require best

value per watt computing power.

2Introduction

Leading EDGE COMPUTING

1.2 Features

6U CompactPCI blade in 8HP width form factor

8th/9th Gen Intel® Core™ with Mobile Intel® CM246 Chipset

Graphics and memory controllers integrated in processor

Dual channel DDR4-2666 memory with available ECC up to

64GB

32bit/33MHz CompactPCI Interface based on PCI specifica-

tions, universal V(I/O)

Supports host mode operation

Dual DVI

ports on front panel



Seven RJ45 Gigabit Ethernet ports by Intel® Ethernet Controller

I210IT on front panel; two RJ45 ports can optionally support PoE

functions (7W per port, 14W total)

One RJ45 Gigabit Ethernet via Intel

i219LM

Optional Infineon SLB9672 TPM support

Introduction 3

cPCI-6640

1.3 Package Contents

The cPCI-6640 is packaged with the following components. If any

of the following items are missing or damaged, retain the shipping

carton and packing material and contact the dealer for inspection.

Please obtain authorization before returning any product to

ADLINK. The packing contents of cPCI-6640 non-standard config-

urations will vary depending on customer requests.

CPU module

The cPCI-6640 Processor Blade

CPU and memory specifications will differ depending on

options selected

Thermal module is assembled on the board

2.5” SATA drive accessory pack

Rear Transition Module

Dependent on the module selected

NOTE:

The contents of non-standard cPCI-6640 configurations may

vary depending on the customer’s requirements.

CAUTION:

This product must be protected from static discharge and phys-

ical shock. Never remove any of the components except at a

static-free workstation. Use the anti-static bag shipped with the

product when putting the board on a surface. Wear an

anti-static wrist strap properly grounded on one of the system's

ESD ground jacks when installing or servicing system compo-

nents.

4Introduction

Leading EDGE COMPUTING

This page intentionally left blank.

Specifications 5

cPCI-6640

2 Specifications

2.1 cPCI-6640 Processor Blade Specifications

CompactPCI

Standards

• PICMG® 2.0 CompactPCI® Rev. 3.0

• PICMG® 2.1 Hot Swap Specification Rev. 2.0

• PICMG® 2.9 System Management (IPMI Rev. 1.5)

• PICMG® 2.16 Packet Switching Backplane Rev. 1.0

Mechanical • Standard 6U CompactPCI®

• Board size: 233mm x 160mm

• Dual slot (8HP)

• CompactPCI® connectors: J1, J2

Processor • Intel® Core™ i7-9850HE processor, 6-cores/12-threads,

9MB cache, 2.7/4.4GHz, 45/35W by cTDP, Intel® UHD

Graphics 630

• Intel® Core™ i7-9850HL processor, 6-cores/12-threads,

9MB cache, 1.9/4.1GHz, 25W TDP, Intel® UHD Graphics 630

• Intel® Core™ i5-8400H processor, 4-cores/8-threads,

8M cache, 2.5/4.2GHz, 45/35W by cTDP, Intel® UHD

Graphics 630

• Intel® Core™ i3-9100HL processor, 4-cores/4-threads,

6MB cache, 1.6/2.9GHz, 25W, Intel® UHD Graphics 630

Chipset • Mobile Intel® CM246 Chipset

Memory • Dual-channel DDR4-2666 SODIMM sockets, up to 64GB (2x

32GB modules)

• ECC memory is available when paired with supporting CPU.

CompactPCI

Bus

• One PCIe x1 Pericom PI7C9X113 PCIe-to-PCI bridge

• PCI 32-bit/33MHz to J1, J2; universal V I/O

• Supports host mode

Gigabit

Ethernet

• 7x RJ45 ports via Intel® i210-IT Ethernet controllers (two

configurable as PoE by BOM option)

• 1x RJ45 port via Intel® i219LM Ethernet controller

Display • 2x DVI-I ports on front panel

Serial Ports • 2x RS-232 ports on front panel

USB • 6x USB 3.0 on front panel

TPM • TPM 2.0: SLB9672

Storage

Interfaces1

• 1x onboard 2.5” SATA connector supporting SATA 6Gb/s drive

• 1x CFast slot

Table 2-1: cPCI-6640 Processor Blade Specifications

6 Specifications

Leading EDGE COMPUTING

1. The storage device limits the operational vibration tolerance. When

the application requires higher specification for anti-vibration, it is

recommended to use a flash storage device.

2. ADLINK-certified thermal design. The thermal performance is depen-

dent on the chassis cooling design. Sufficient forced air-flow is required.

Temperature limits of optional mass storage devices may also affect the

thermal specification.

Faceplate I/O • 8x 10/100/1000BASE-T Ethernet ports

• 2x DVI-I ports

• 6x USB 3.0 ports

• 2x DB9 serial port

Compatibility

• Windows 10 Enterprise 2004 64-bit

(Please contact ADLINK for other OS support)

Environmental • Operating Temperature (with forced air flow)2:

Standard: 0°C to +60°C

Extreme temperature: -40°C to +85°C

• Storage Temperature: -40°C to +85°C

• Humidity: 95% @60°C non-condensing

• Shock: 20G peak-to-peak, 11ms duration, non-operating

•Vibration

1: 2Grms, 5-500Hz, each axis, operating (w/o hard

drive)

EMI EMC: EN 55032/35

EMI: CISPR 32, FCC Part 15B Class A

EMS:

• IEC 61000-4-11

• IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV

• IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m

• IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV

• IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV

• IEC 61000-4-6 CS: 1 V

• IEC 61000-4-8 PFM

Table 2-1: cPCI-6640 Processor Blade Specifications

Specifications 7

cPCI-6640

2.2 Block Diagrams

cPCI-6640 Processor Blade

Figure 2-1: cPCI-6640 Processor Blade Functional Block Diagram

;ϬǆϰͿ

/K^

,;ǇĞůůŽǁͿ

/ŶƚĞůDϮϰϲĐŚŝƉƐĞƚ

^W/

>W

ŽĨĨĞĞ>ĂŬĞͲ,

D/ W/

^d>Ͳ>

W/Ğ

^d

Z:Ͳϰϱ

Ϯǆh^

^d

/ϮϭϬ W/Ğ

ϮǆZ:Ͳϰϱ

;ǁŝƚŚWŽͿ W/Ğ

^K/DDϭ;ǁͬǁŽͿ

s/Ͳ/

WdEϯϯϱϱ

Z:Ͳϰϱ 'ď

>WdKhZd

EdϱϭϮϰ

,Z

ϵ

ǇĐĂďůĞ

WŽǁĞƌ;ŐƌĞĞŶͿ

td;ƌĞĚͿ

>

z,t

'WK

W/ϳϵyϭϭϯ

W/Ğ

W/ϯϮďŝƚͬϯϯD,ǌ

^K/DDϮ;ǁͬǁŽͿ

/ϭ;Ϳ

/Ϯ;Ϳ

/ϯ;Ϳ

ĞW;Ϳ

Ϯǆh^ϯ͘ϬͬϮ͘Ϭ

W/Ğ

Ϯǆh^ϯ͘ϬͬϮ͘Ϭ

W/Ğ

ϮǆZ:Ͳϰϱ

W/Ğ

;Z:ϭͿ

;Z:ϮͿ

>ϵ

>ϭϮ

;EϵͿ

;EϭϬͿ

ϵ

s/Ͳ/

;s/ϮͿ

;s/ϭͿ

Z:Ͳϰϱ

Ϯǆh^

;EϴͿ

;EϳͿ

Z:Ͳϰϱ

Ϯǆh^

;WhϭͿ

;hϯͿ

WdEϯϯϱϱ

;hϱͿ

>ϳ

>ϭϯ

>ϭϭ

>ϲ

>ϴ

>ϭϬ

hϯ;>ϭͺ>ϬͿ

hϮ;ϭͺϯͿ

hϯ;>ϱͺ>ϮͿ

hϮ;ϳͺϱͿ

hϯ;>ϰͺ>ϯͿ

hϮ;ϭϭͺϵͿ

;hϮϲͿ

;hϭϯͿ

;hϭϱͿ

/ϮϭϬ

;hϭϳͿ

/ϮϭϬ

;hϭϵͿ

/ϮϭϬ

;hϭϭͿ

/ϮϭϬ

;hϵͿ

/ϮϭϬ

;hϳͿ

/ϮϭϬ

>ϮϬ

,

>Ϯϭ

;EϭϭͿ

&^d

;EϭϮͿ

>ϭϱ

/Ϯϭϵ

;hϮϭͿ

;/DDϭͿ

;/DDϮͿ

;EϭϯͿ

KDͺ

KDͺ ,Z

;EϭϰͿ

;hϮϮͿ

;hϮϲͿ

;:ϭͿ

;:ϮͿ

;hϮͿ

;WǁŝƚŚ/ϭͺhyͿ

;s/ǁŝƚŚWͿ

;s/ǁŝƚŚW,͗WͿ

;WǁŝƚŚ/ϯͺhyͿ

dWDϮ͘Ϭ

;dWDϭͿ

8 Specifications

Leading EDGE COMPUTING

2.3 I/O Connectivity Table

Table 2-2: cPCI-6640 I/O Connectivity

Function cPCI-6640 (8HP)

Faceplate Onboard

GbE Y (RJ45 x8) –

COM Y (DB9 x2) –

USB 3.0 Y x6 –

DVI Y x2 –

Serial ATA –Y x1

CFast –Y x1

LED Y x3 –

Reset Button Y–

Specifications 9

cPCI-6640

2.4 Power Requirements

In order to guarantee a stable functionality of the system, it is rec-

ommended to provide more power than the system requires. An

industrial power supply unit should be able to provide at least

twice as much power as the entire system requires of each

voltage. An ATX power supply unit should be able to provide at

least three times as much power as the entire system requires of

each voltage.

The tolerance of the voltage lines described in the CompactPCI

specification (PICMG 2.0 R3.0) is +5%/-3% for 5, 3.3 V and ±5%

for ±12V. This specification is for power delivered to each slot and

it includes both the power supply and the backplane tolerance.

Voltage Nominal

Value Tolerance Max. Ripple

(P - P)

5V +5.0 VDC +5% / -3% 50 mV

3.3V +3.3 VDC +5% / -3% 50 mV

+12V +12 VDC +5% / -5% 120 mV

-12V -12 VDC +5% / -5% 120 mV

V I/O (PCI I/O

Buffer Voltage)

+3.3 VDC or

+5 VDC +5% / -3% 50 mV

GND

10 Specifications

Leading EDGE COMPUTING

This page intentionally left blank.

Page is loading ...

Adlink cPCI-6640 Series Owner's manual

Brand: Adlink

Model: cPCI-6640 Series

Category: Motherboards

Type: Owner's manual

Download PDF

report