Topeak TC9624 Owner's manual

Type
Owner's manual
WARRANTY
2-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of
manufacture. All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in any way not intended as
described in this operating manual.
* The specifications and design are subject to change without notice.
Fits ø19.6 ~ ø26 mm
B.
A.
Fits ø 27.7~ ø35 mm
User's Guide
DeFender M3
GB
CAUTION
Do not disassemble
the rear part.
INSTALLATION
M-TC9622-23-GB 06/11
Copyright © Topeak, Inc. 2011
CLICK
LOCK
LOCK
4mm
Allen key
Recommended
Torque:
2-4 Nm
Front
Make sure the wedge set is
inserted in the right direction
and locked as close to the fork
crown as possible. Improper
installation will cause damage
to DeFender M3 and may
cause bodily harm.
DeFender M3 fits
most standard front
forks. However, it will
not fit forks with a
crown thickness over
60 mm (2.36") and is
not designed to be
used with the 1.5"
headset standard.
thickness 60 mm thickness 60 mm
Press to
install / release
(Rear)
(Front)
Locking Lever
Wedge Set
Please contact your Topeak dealer with any questions. For USA customer service call : 1-800-250-3068 , www.topeak.com
Tool required: 4 mm Allen key
W
h
e
e
l
S
u
s
p
e
n
s
i
o
n
T
r
a
v
e
l
W
h
e
e
l
S
u
s
p
e
n
s
i
o
n
T
r
a
v
e
l
When adjusting the angle of DeFender
M33, make sure the clearance between
DeFender
M33 and the tire is larger
than wheel suspension travel of the
bike. Incorrect clearance may cause
damage to DeFender
M33, your bike,
or potentially cause bodily harm.
WARNING
For Rear Suspension Bike
DeFender M33
Tool required: 3 mm / 5mm Allen key
INSTALLATION
Release locking lever and strap pin Close locking lever to fasten
DeFender M33 onto seatpost
GB
REVERSIBLE REAR FENDER TAB INSTALLATION (POSITION 1 TO POSITION 2)
User's Guide
CLICK
PUSH DOWN
fixing knob to fix
strap position
Engage strap pin with locking lever
until a "CLICK" is heard
PUSH DOWN
CLICK
Pull up and
turn fixing
knob to adjust
strap length
Press release
button to
remove fender Rear Fender
Tab
3mm Allen key
Reverse Rear
Fender Tab
POSITION 2
POSITION 1
(Preset)
Angle Adjusting Bolt
Strap Pin
Reversible Rear
Fender Tab
Release Button
Fixing Knob
The Revsersible Rear Fender Tab
accommodates a wide range of
frames sizes and seat tube angles
to suit different needs. Make sure
to choose the best mounting
position for your 26" MTB.
POSITION 1
(Preset)
POSITION 2
ANGLE ADJUSTMENT
Adjust the angle of DeFender M33 by loosening the angle
adjusting bolts and retightening the bolts once the correct
angle is achieved.
To prevent disassembly and possible
damage, DO NOT loosen the bolt completely.
WARNING
Recommended
Torque:
2-4 Nm
5mm
Allen key
  • Page 1 1
  • Page 2 2

Topeak TC9624 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI