2. Tascam
  3. IF-SM/DM

Tascam IF-SM/DM Product information

  • Hello! I've reviewed the datasheet for the TASCAM IF-SM/DM surround monitoring card. It's designed for the DM-3200 digital mixer and supports high-resolution audio up to 96kHz/24-bit. It includes features like flexible downmixing, individual channel mute/solo, and surround bass management. I'm ready to answer your questions about its capabilities and installation.
  • What mixer is the IF-SM/DM designed for?
    What surround formats does the IF-SM/DM support?
    What is the audio resolution supported by IF-SM/DM?
    Can the IF-SM/DM downmix to mono or stereo?
Installs into expansion slot #1 of the DM-3200
Eight analogue output channels
44.1k, 48k, 88.2k, 96k operation
Flexible downmixing
Uses the DM-3200’s Pink Noise generator for monitor
calibration
Individual channel Mute/Solo Individual channel delay
compensation
Surround Bass Management
IF-SM/DM
Surround Monitoring Card
The IF-SM/DM is an optional surround monitor solution for the DM-3200 digital mixer, making the DM-3200 ideal for DVD-Audio music
production, game development and post-production audio mixing. With audio resolution up to 96kHz/24-bit, the IF-SM/DM’s analog
outputs allow you to install it into a DM-3200 expansion slot and forgo unwieldy external devices and their connections. It adds multi-
speaker monitoring control to the DM-3200, inlcuding a calibrated monitor level control.
The IF-SM/DM supports surround formats from LCRS up to 5.1 and 6.1—with the ability to downmix to mono or stereo from any
surround format to check your mix on a smaller system. Individual outputs can be soloed or muted, allowing the engineer to check what
is going to a particular channel.
Main Features
Specifications
--
Design and specifications subject to change without notice.
Last modified: 2010-10-07 14:39:20 UT C
/