Full Length of Fireplace Must
be Inside Drain Pan Area
Fireplace
Bottom Support
DRAIN PAN KITS FOR 36" AND 42" OUTDOOR FIREPLACES
[FOR USE WITH MODELS TUSCAN 36/42, ODYSSEY 36/42, WRE3836/42, WRE3036/42, VRE3036/42, SAVANNAH 36/42 AND SHILOH 36/42]
DRAIN PAN KITS
36/42 OUTDOOR FIREPLACES
P/N 127168-01
Rev. B, 03/2017
HEARTH PRODUCTS
KITS AND ACCESSORIES
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Printed in U.S.A. © 2014 Innovative Hearth Products
P/N 127168-01 Rev. B 03/2017
IHP reserves the right to make changes at any time, without notice, in design, materials, specifi cations, prices and also to discontinue colors, styles and products. Consult your local distributor for
fi replace code information.
KIT CONTENTS
1 ea. Drain Pan
1 ea. Stainless Decorated Face Extension
1 ea. Instruction Sheet
Cat. No. Model Description
F1089 DP36 36" Drain Pan w/ 1" Stainless Decorative Face Ext.
F1090 DP42 42" Drain Pan w/ 1" Stainless Decorative Face Ext.
1
Innovative Hearth Products (IHP)
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210
REQUIRED TOOLS AND SUPPLIES
None
GENERAL INFORMATION
To prevent water collection inside the fi replace bottom, install an
optional drain pan accessory.
READ ALL THE STEPS BEFORE STARTING THE INSTALLATION
THE FIREPLACE MUST BE OFF AND COLD BEFORE BEGINNING.
ALL WARNINGS, PRECAUTIONS AND INSTRUCTIONS IN THE
INSTALLATION AND OPERATION MANUAL PROVIDED WITH THE
APPLIANCE APPLY TO THESE INSTRUCTIONS.
If you encounter any problems, need clarifi cation of these instructions
or are not qualifi ed to properly install this kit, contact you local
distributor or dealer.
If any of these parts are missing or damaged, contact your dealer or
IHP.us.com for referral information.
DRAIN PAN ASSEMBLY INSTALLATION
Place drain pan assembly as shown in the illustration.
Figure 1 - Installing Drain Pan