Vivotek AW-IHB-0400 Industrial Unmanaged 90W bt PoE Switch Installation guide
- Type
- Installation guide
POWER
PW1/PW2
Green ON Power is on and normal.
SFP port
Green
Green ON Fiber is attached.
Green Flashing Data is being transmitted / received.
LAN port
Green
Green ON TX link is detected.
Green Flashing Data is being transmitted or received.
PoE port
Amber
Amber ON PSE is activated and PD is detected.
Amber OFF PoE is OFF.
1. Install the converter in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the converter are not blocked.
Single-mode: 9/125um ,1310/1550nm.
4. DC input: 48V~56VDC for 30W 802.3at/af. DC input: 52~56VDC for 90W 802.3bt Follow the printed polarity for V+,
V-, and Ground.
AW-IHB-0400 Industrial Unmanaged 90W bt PoE Switch
Quick Installation Guide
The AW-IHB-0400 is an industrial unmanaged switch that supports 2x GbE 90W bt PoE and 2x GbE SFP ports.
This industrial PoE switch also features a wide operating temperature range from -40ºC to 75ºC for harsh environment.
IMPORTANT:
INTRODUCTION
LED DEFINITIONS
CONNECTION
* 1x PoE switch * 1x Quick Installation Guide
* 1x 4-pin terminal block * 1x DIN rail bracket
PACKAGE CONTENTS
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
| +886- 2-82455282|F +886-2-82455532|E sales@vivotek.com
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T: 408-773-8686|F: 408-773-8298 | s[email protected]
VIVOTEK Europe
Zandsteen 15, 2132 MZ Hoofddorp Delta Electronics
T:+31 (0)20 800 3817 E:[email protected]m
Copyright © 2022 VIVOTEK INC. All rights reserved.
WARNING - Always ground the power source to maintain a clean power input.
::E:T:
It’s IEEE 802.3af/at/bt compliant and delivers the real full-load output of 180W on 2 PoE ports (up to 90W per port).
PW1 LED
PW2 LED
SFP status LED 4SFP status LED 3
GbE 90W bt LAN ports GbE SFPports
Ground screw
* Make sure the grouning
resistance is lower than
0.5Ω.
AC-to-DC power
100~240 VAC IN
Solid or stranded (AWG): 12-24/14-22
Wire strip length: 7-8mm
Torque: 5lb-In/0.5Nm/0.56Nm
DC: 48V ~ 56V for 30W at/af
DC: 52 ~ 56VDC for 90W bt
IMPORTANT
VDC: 48V ~ 56V
-
1
Vivotek AW-IHB-0400 Industrial Unmanaged 90W bt PoE Switch Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI