WIKA A2G-20 Operating instructions

GB

Air velocity transmitter model A2G-20

Luftgeschwindigkeitsmessumformer Typ A2G-20

Transmetteur de vitesse d'air type A2G-20

Transmisor de velocidad del aire modelo A2G-20

Trasmettitore di velocità dell'aria modello A2G-20

Air velocity transmitter model A2G-20

D

F

E

I

Operating instructions

Betriebsanleitung

Mode d'emploi

Manual de instrucciones

Manuale d'uso

WIKA operating instructions air2guide model A2G-20

GB

I

D

F

E

2

40339556.02 04/2012 GB/D/F/E/I

Operating instructions model A2G-20 Page 3-12

Betriebsanleitung Typ A2G-20 Seite 13-22

Mode d'emploi type A2G-20 Page 23-32

Manual de instrucciones modelo A2G-20 Página 33-42

Manuale d'uso modello A2G-20 Pagina 43-52

WIKA

®

is a registered trademark in various countries.

WIKA

®

ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

Lire le mode d‘emploi avant de commencer toute opération !

A conserver pour une utilisation ultérieure !

¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!

¡Guardar el manual para una eventual consulta!

Prima di iniziare ad utilizzare lo strumento, leggere il manuale d‘uso!

Conservare per future consultazioni!

WIKA operating instructions air2guide model A2G-20

3

GB

40339556.02 04/2012 GB/D/F/E/I

1. General information 4

2. Safety 5

3. Specications 6

4.

Design and function

8

5. Transport, packaging and storage 9

6. Commissioning, operation 9

7. Options and accessories 11

8. Maintenance and cleaning 12

9. Disposal 12

Contents

WIKA operating instructions air2guide model A2G-20

GB

4

40339556.02 04/2012 GB/D/F/E/I

1. General information

■

The air velocity transmitter described in the operating instructions

has been designed and manufactured using state-of-the-art

technology. All components are subject to stringent quality and

environmental criteria during production. Our management systems

are certied to ISO 9001 and ISO 14001.

■

These operating instructions contain important information on

handling the instrument. Working safely requires that all safety

instructions and work instructions are observed.

■

Observe the relevant local accident prevention regulations and

general safety regulations for the instrument’s range of use.

■

The operating instructions are part of the product and must be kept

in the immediate vicinity of the instrument and readily accessible to

skilled personnel at any time.

■

Skilled personnel must have carefully read and understood the

operating instructions, prior to beginning any work.

■

The manufacturer’s liability is void in the case of any damage caused

by using the product contrary to its intended use, non-compliance

with these operating instructions, assignment of insuciently

qualied skilled personnel or unauthorised modications to the

instrument.

■

The general terms and conditions contained in the sales

documentation shall apply.

■

Subject to technical modications.

■

Further information:

- Internet address: www.wika.de / www.wika.com

www.air2guide.com

- Relevant data sheet: SP 69.06

WIKA operating instructions air2guide model A2G-20

5

GB

40339556.02 04/2012 GB/D/F/E/I

1. General information / 2. Safety

Explanation of symbols

WARNING!

... indicates a potentially dangerous situation which can

result in serious injury or death if not avoided.

Information

… points out useful tips, recommendations and information

for ecient and trouble-free operation.

2. Safety

WARNING!

Before installation, commissioning and operation, ensure

that the appropriate air velocity transmitter has been

selected in terms of measuring range, design and specic

measuring conditions.

Non-observance can result in serious injury and/or damage

to the equipment.

Further important safety instructions can be found in the

individual chapters of these operating instructions.

2.1 Intended use

This air velocity transmitter is used for measuring the air velocity and

temperature in gaseous media of heating, ventilation and air-condition-

ing systems (e.g. fresh air/exhaust air ducts)

The instrument has been designed and built solely for the intended use

described here and may only be used accordingly.

The manufacturer shall not be liable for claims of any type based on

operation contrary to the intended use.

WIKA operating instructions air2guide model A2G-20

GB

6

40339556.02 04/2012 GB/D/F/E/I

2. Safety / 3. Specications

2.2 Personnel qualication

WARNING!

Risk of injury if qualication is insucient!

Improper handling can result in considerable injury and

damage to equipment.

■

The activities described in these operating instructions

may only be carried out by skilled personnel who have

the qualications described below.

Skilled personnel

Skilled personnel are understood to be personnel who, based on their

technical training, knowledge of measurement and control technology

and on their experience and knowledge of country-specic regulations,

current standards and directives, are capable of carrying out the work

described and independently recognising potential hazards.

Explanation of symbols

CE, Communauté Européenne

Instruments bearing this mark comply with the relevant

European directives.

3. Specications

Measuring element

Pt1000 and NTC10k

Case

Plastic (ABS)

Electrical connection

Cable gland M16

Screw terminals, max. 1.5 mm

2

WIKA operating instructions air2guide model A2G-20

7

GB

40339556.02 04/2012 GB/D/F/E/I

3. Specications

Output signal

Air velocity:

0 … 10 V (linear to m/s), load min. 1 kΩ or

4 … 20 mA (linear to m/s), load max. 400 Ω

Temperature:

0 … 10 V (linear to °C), load min. 1 kΩ or

4 … 20 mA (linear to °C), load max. 400 Ω

Supply voltage

AC/DC 24 V ±10 %

Dimensions in mm

Ingress protection

IP 54 per EN 60529 / lEC 529

For further specications see WIKA data sheet SP 69.06 and the order

documentation.

Air ow direction

WIKA operating instructions air2guide model A2G-20

GB

8

40339556.02 04/2012 GB/D/F/E/I

4. Design and function

Description

Design

EMC directive: 2004/108/EC

RoHS directive: 2002/95/EC

Low voltage directive: 2006/95/EC

WEEE directive: 2002/96/EC

Measuring ranges

Air velocity:

Measuring range 0 … 2 m/s, 0 ... 10 m/s and 0 ... 20 m/s

(settable at the instrument via jumpers)

Temperature: 0 … +50 °C

Accuracy

Air velocity:

Measuring range 0 … 2 m/s: < 0.1 m/s +5 % of measured value

Measuring range 0 ... 10 m/s: < 0.5 m/s +5 % of measured value

Measuring range 0 ... 20 m/s: < 1.0 m/s +5 % of measured value

Temperature:

< 0.5 °C (v > 0.5 m/s)

Permissible temperature

Ambient: 0 ... +50 °C

Operation: 0 … +50 °C, max. 85 % rH

Scope of delivery

Cross-check the scope of delivery with the delivery note.

WIKA operating instructions air2guide model A2G-20

9

GB

40339556.02 04/2012 GB/D/F/E/I

5. Transport, packaging and storage

5.1 Transport

Check the air velocity transmitter for any damage that may have been

caused during transportation.

5.2 Packaging

Do not remove packaging until just before mounting.

Keep the packaging as it will provide optimum protection during

transport (e.g. change in installation site, sending for repair).

5.3 Storage

Permissible conditions at the place of storage:

Storage temperature: -20 ... +70 °C

Protect the instruments from moisture and dust.

6. Commissioning, operation

Installation and mechanical connection

The air velocity transmitter is installed in the duct. The cable for the

supply voltage and the cable for the relay connection (optional) have to

be laid separately, if high voltages (no safety extra-low voltage) are to be

switched with the relay. Both cables have their own cable entry.

The relay parameters have to be set before voltage is connected to the

relay connections. This ensures human safety against electric shock.

The instrument is equipped with a lid xing screw. This screw has to

be used, if the voltage connected to the relay connections is no safety

extra-low voltage.

5. Transport, packaging ... / 6. Commissioning, operation

WIKA operating instructions air2guide model A2G-20

GB

10

40339556.02 04/2012 GB/D/F/E/I

6. Commissioning, operation

Output 0 ... 10 V / 4 ... 20 mA (temperature)

Connection diagram

Output 0 ... 10 V / 4 ... 20 mA (air velocity)

Supply voltage

Electrical connection

The instruments are designed to operate with safety extra-low voltage

(SELV). When wiring up the instruments, the technical specications

for those instruments should be followed. In the case of a sensor with

transmitter, as a rule, the transmitter should be operated in the middle

of the measuring range, since deviations can occur at the range limits.

The ambient temperature of the transmitter electronics should be kept

constant.

The transmitters must be operated at a constant operating voltage

(±0.2 V). Current/voltage spikes from switching the power supply on or

o must be prevented by the customer.

Connection diagram

Temperature 4 ... 20 mA air

velocity 4 ... 20 mA

Temperature 0 ... 10 V air velocity

0 ... 10 V

see commissioning of the option with relay

Jumper:

Measuring range: 2 m/s 10 m/s 20 m/s

Jumper measuring range

Jumper for the setting of the outputs (mA/V)

Both outputs can be set independently

WIKA operating instructions air2guide model A2G-20

11

GB

40339556.02 04/2012 GB/D/F/E/I

Commissioning

A prerequisite for the commissioning is a proper installation of all

electrical supply, control and measuring lines and of the pressure

connection lines. Before commissioning, the leak tightness of the

pressure connection lines must be checked.

The air velocity transmitter is supplied with a special protection cap

protecting the sensitive sensor element against damage during

transport. Before commissioning, this protection cap absolutely must

be removed!

Commissioning of the option with relay

Jumper and pushbutton for the setting of the relay parameters:

Set the jumper "switching point" (sw.p.) and then push the button to set

the desired switching point. The set value (m/s) is shown in the display.

Set the jumper "hysteresis" (hyst.) and then push the button to set the

desired hysteresis of the relay switching point. The set value (m/s) is

shown in the display.

7. Options and accessories

Standard accessories

■

Mounting ange

Options

■

LC display for measured value display

■

LC display for measured value display and relay (potential-free,

change-over contact, max. AC 250 V, 6 A, DC 30 V, 6 A, adjustable

switch point and hysteresis)

6. Commissioning, operation / 7. Options and accessories

WIKA operating instructions air2guide model A2G-20

GB

12

40339556.02 04/2012 GB/D/F/E/I

8. Maintenance and cleaning / 9. Disposal

8. Maintenance and cleaning

The air velocity transmitter is maintenance-free and oers long service

life provided it is handled and operated properly.

Clean the instruments with a moist cloth (soap water).

Repairs must only be carried out by the manufacturer or appropriately

qualied skilled personnel.

9. Disposal

Incorrect disposal can put the environment at risk.

Dispose of instrument components and packaging materials in an

environmentally compatible way and in accordance with the country-

specic waste disposal regulations.

Page is loading ...

I

WIKA manuale d‘uso air2guide, modello A2G-20

52

40339556.02 04/2012 GB/D/F/E/I

8. Manutenzione e pulizia / 9. Smaltimento

8. Manutenzione e pulizia

Il trasmettitore di velocità dell'aria non richiede manutenzione e si

distingue per la sua lunga durata se viene utilizzato in modo corretto.

Pulire gli apparecchi con un panno umido (con acqua e sapone).

Le riparazioni devono essere eettuate solo dal costruttore o da

personale adeguatamente qualicato.

9. Smaltimento

Lo smaltimento inappropriato può provocare rischi per l‘ambiente.

Lo smaltimento dei componenti dello strumento e dei materiali di

imballaggio deve essere eettuato in modo compatibile ed in accordo

alle normative nazionali.

WIKA Alexander Wiegand SE & Co. KG

Alexander-Wiegand-Straße 30

63911 Klingenberg • Germany

Tel (+49) 93 72/132-0

Fax (+49) 93 72/132-406

E-Mail info@wika.de

www.wika.de

WIKA subsidiaries worldwide can be found online at www.wika.com.

WIKA-Niederlassungen weltweit nden Sie online unter www.wika.de.

La liste des liales WIKA dans le monde se trouve sur www.wika.fr.

Sucursales WIKA en todo el mundo puede encontrar en www.wika.es.

Per liali WIKA nel mondo, visitate il nostro sito www.wika.it.

WIKA A2G-20 Operating instructions

This manual is also suitable for

WIKA A2G-20 Operating instructions

in other languages

Related papers

Other documents