SPEEDLINK SNAPPY Installation guide

SNAPPY
SPEEDLINK
Brand
SPEEDLINK
Model
SNAPPY
Category
Mice
Type
Installation guide

SPEEDLINK SNAPPY is a wireless mouse that provides a comfortable and precise user experience. It features a nano USB receiver that can be plugged into any free USB port on a computer, allowing for a wireless connection between the mouse and the computer. The mouse requires two AAA batteries (1.5V) to operate and has an on/off switch to conserve battery life when not in use.

SPEEDLINK SNAPPY is a wireless mouse that provides a comfortable and precise user experience. It features a nano USB receiver that can be plugged into any free USB port on a computer, allowing for a wireless connection between the mouse and the computer. The mouse requires two AAA batteries (1.5V) to operate and has an on/off switch to conserve battery life when not in use.

Page is loading ...
Plug the nano USB receiver into any free USB
port on your computer. The operating system will
automatically detect the device.
Open the battery compartment on the base of the
mouse. Insert two AAA batteries (1.5V), making
sure the polarity is correct. Close the battery
compartment again.
Switch the mouse on by setting the switch on
the base to ON. If you do not intend to use the
mouse, simply set the switch to OFF to save
energy.
Verbinden Sie den Nano-USB-Empfänger mit
einer freien USB-Schnittstelle an Ihrem Rechner.
Das Gerät wird vom Betriebssystem automatisch
erkannt.
Öffnen Sie das Batteriefach an der Unterseite
der Maus. Legen Sie zwei AAA-Batterien (1,5 V)
ein, achten Sie dabei auf die richtige Polarität.
Schließen Sie das Batteriefach wieder.
Schalten Sie die Maus ein, indem Sie den
Schalter an der Unterseite in die „ON“-Position
schieben. Bei Nichtgebrauch schalten Sie die
Maus einfach ab („OFF“), um Strom zu sparen.
1 2 3
PC Notebook
  • Page 1 1
  • Page 2 2

SPEEDLINK SNAPPY Installation guide

SNAPPY
SPEEDLINK
Brand
SPEEDLINK
Model
SNAPPY
Category
Mice
Type
Installation guide

SPEEDLINK SNAPPY is a wireless mouse that provides a comfortable and precise user experience. It features a nano USB receiver that can be plugged into any free USB port on a computer, allowing for a wireless connection between the mouse and the computer. The mouse requires two AAA batteries (1.5V) to operate and has an on/off switch to conserve battery life when not in use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents