Sanyo Pan-Focus VCC-P9574N User manual

Category
Security cameras
Type
User manual
INSTRUCTION MANUAL (Pattern sheet attached)
Color CCD Camera
VDC-DP9584N
VDC-DPN9585P
VCC-P9574N
VCC-PN9575P
Please read this manual before installing and using this
camera, and always follow the instructions in it for proper
use. Be sure to keep it handy for later reference.
Refer to the supplied CD-ROM for the French, Spanish, German and Chinese
“INSTRUCTION MANUAL”.
To view the INSTRUCTION MANUAL contained in the supplied CD-ROM, you
need Adobe
®
Reader
®
application. You can download it for installation from the
following web site at Adobe Systems Incorporated.
http://www.adobe.com
Consultez le CD-ROM fourni pour le « MANUEL DINSTRUCTIONS » en
français, espagnol, allemand et en chinois.
Pour visualiser le MANUEL D’INSTRUCTIONS contenu dans le CD-ROM
fourni, l’application Adobe
®
Reader
®
vous est nécessaire. Vous pouvez la
télécharger depuis le site Web suivant d’Adobe Systems Incorporated.
http://www.adobe.com
Hacer referencia al CD-ROM que se suministra para consultar el “MANUAL DE
INSTRUCCIONES” en francés, español, alemán y chino.
Para ver el MANUAL DE INSTRUCCIONES contenido en el CD-ROM
suministrado, es necesario disponer de la aplicación Adobe
®
Reader
®
.
Es posible descargarla para la instalación del siguiente sitio web de Adobe
Systems Incorporated.
http://www.adobe.com
Die „BEDIENUNGSANLEITUNG“ in den Sprachen Französisch, Spanisch,
Deutsch und Chinesisch finden Sie auf der mitgelieferten CD-ROM.
Zum Öffnen der BEDIENUNGSANLEITUNG auf der mitgelieferten CD-ROM
benötigen Sie das Programm Adobe
®
Reader
®
. Sie können das Programm
unter der nachstehend angegebenen Internet-Adresse bei Adobe Systems
Incorporated zur Installation herunterladen:
http://www.adobe.com
请参阅随附的光盘以了解法语西班牙语德语中文 “说明手册”
要查看随附光盘中包含的说明手册,您需要安装 Adobe
®
Reader
®
应用程序。
您可以从
Adobe Systems Incorporated
的以下网站下载并进行安装。
http://www.adobe.com
VDC-DP9584N/VDC-DPN9585P VCC-P9574N/VCC-PN9575P
L5BP2_BQ2_US(GB).book 1 ページ 2006年9月4日 月曜日 午後4時24分
1
Contents
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Useful Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Concerning Control Buttons for Configuration and
Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Accessing the Main Menu . . . . . . . . . . . . . . . . . . . 7
Adjusting Synchronization Error <SYNC> . . . . . . . . . . . 15
Backlight Compensation <BLC>. . . . . . . . . . . . . . . . . . . 16
Adjusting Iris Level <IRIS> . . . . . . . . . . . . . . . . . . . . . . . 17
Setting White Balance <WHITE BALANCE> . . . . . . . . . 18
AOne-Push Adjustment (AWC). . . . . . . . . . . . . . . . . 19
BManual White Balance (MWB) . . . . . . . . . . . . . . . . 20
Setting Gain Value <AGC GAIN>. . . . . . . . . . . . . . . . . . 21
Correcting Gamma Characteristic <GAMMA> . . . . . . . . 22
Specifying Shutter Speed <SHUTTER>. . . . . . . . . . . . . 23
Accentuating Subject Outline <APERTURE>. . . . . . . . . 24
(VDC-DP9584N/VDC-DPN9585P)
Adjusting DAY/NIGHT Function <DAY/NIGHT>. . . . . . . 25
AAdjusting Automatic Setting (AUTO) . . . . . . . . . . . 26
BAdjusting Black-and-White Setting (B/W). . . . . . . . 27
Sequential Panning along the Registered Preset Positions
<SEQUENTIAL PAN> . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Automatic Intermittent Panning <AUTO PAN>. . . . . . . . 32
Getting Started
Selecting Display Language <LANGUAGE>. . . . 9
Naming Cameras <OPTION> – <TITLE> . . . . . . . 10
Setting/Cancelling Password Lock
<PASSWORD>. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Settings/Adjustments
Setting Camera Performance <CAMERA> . . . . . . 14
Registering Monitoring Positions
<PRESET POSITION> . . . . . . . . . . . . . . . . . . . . . . . 28
Automatic Monitoring <AUTO MODE> . . . . . . . . . 30
The contents in angle brackets < > are the menu screen title.
L5BP2_BQ2_US(GB).book 1 ページ 2006年9月4日 月曜日 午後4時24分
2
Contents
Specifying Alarm Input <ALARM IN>. . . . . . . . . . . . . . . . 36
Specifying Alarm Output <ALARM OUT> . . . . . . . . . . . . 37
Setting Motion Sensor <MOTION> . . . . . . . . . . . . . . . . . 38
Setting Zooming Up at Alarm Detection <ZOOM>. . . . . . 40
Setting Alarm Duration <DURATION>. . . . . . . . . . . . . . . 40
Setting Alarm Detection Notification <ALARM SIGN> . . . 41
Hiding Image Partially <PRIVACY MASK> . . . . . . . . . . . 43
Configuring the Network Settings <NETWORK>. . . . . . . 46
Screen Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Replacement timing of major parts. . . . . . . . . . . . . . . . . 53
Pattern sheet
(VDC-DP9584N/VDC-DPN9585P)
. . . . . . . . . . . . . . . . . . . . 54
(VCC-P9574N/VCC-PN9575P). . . . . . . . . . . . . . . . . . . . . . 55
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Returning to Specified Monitoring Mode
Automatically <AUTO RETURN> . . . . . . . . . . . . . 34
Setting Alarm <ALARM>. . . . . . . . . . . . . . . . . . . . 35
Configuring Options <OPTION> . . . . . . . . . . . . . 42
Flow of Camera Operation through to Network
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Flow of VA-SW3050LITE Software Operation . . . . . 50
MEMO:
This instruction manual covers four models. Any difference among the four models is indicated when necessary.
Differences in the menu screen among the four models are as indicated below.
This manual describes the menu screen for the VDC-DP9584N.
VDC-DP9584N VCC-P9574N VDC-DPN9585P VCC-PN9575P
Menu language English/French/Spanish English/French/German
Shutter speed 1/60, 1/100, 1/250, ... 1/50, 1/120, 1/250, ...
Day/Night function m m
IP66 m m
L5BP2_BQ2_US(GB).book 2 ページ 2006年9月4日 月曜日 午後4時24分
3
Precautions
In case of a problem
Do not use the unit if smoke or a strange odor comes from the unit, or if it
seems not to function correctly. Turn off the power immediately and
disconnect the power cord, and then consult your dealer or an Authorized
Sanyo Service Center.
Do not open or modify
Do not open the cabinet, as it may be dangerous and cause damage to
the unit. For repairs, consult your dealer or an Authorized Sanyo Service
Center.
Do not put objects inside the unit
Make sure that no metal objects or flammable substance get inside the
unit. If used with a foreign object inside, it could cause a fire, a short-circuit
or damage. Be careful to protect the unit from rain, sea water, etc. If water
or liquid gets inside the unit, turn off the power immediately and disconnect
the power cord, and then consult your dealer or an Authorized Sanyo
Service Center.
Be careful when handling the unit
To prevent damage, do not drop the unit or subject it to strong shock or
vibration.
Do not install this unit close to magnetic fields
The magnetic fields may result in unstable operation.
Protect from humidity and dust
To prevent damage, do not install the unit where there is greasy smoke or
steam, where the humidity may get too high, or where there is a lot of dust.
Protect from high temperatures
Do not install close to stoves, or other heat sources, such as spotlights,
etc., or where it could be subject to direct sunlight, as this could cause
deformation, discoloration or other damage.
Be careful when installing close to the ceiling, in a kitchen or boiler room,
as the temperature may rise to high levels.
Cleaning
Dirt can be removed from the cabinet by wiping it with a soft cloth. To
remove stains, wipe with a soft cloth moistened with a soft detergent
solution and wrung dry, then dry by wiping with a soft cloth.
Do not use benzine, thinner or other chemical products on the cabinet,
as this may cause deformation and paint peeling. Before using a
chemical cloth, make sure to read all accompanying instructions. Make
sure that no plastic or rubber material comes into contact with the
cabinet for a long period of time, as this may cause damage or paint
peeling.
(VDC-DP9584N/VDC-DPN9585P)
Approvals: IP66
This unit has been certified to IP66 standards when properly installed.
Ensure all openings in enclosure are sealed as per manufacturer's
instructions.
Getting Started
L5BP2_BQ2_US(GB).book 3 ページ 2006年9月4日 月曜日 午後4時24分
4
Getting Started
Information
Supports IEEE802.3af-compliant PoE (Power over Ethernet) power
supply.
Equipped with function for bi-directional voice communication
between the camera and PC.
Equipped with motorized zoom pan-focus auto iris lens. Thanks to its
large depth of field, focused images can be obtained in a wider range
of scene without intentional focusing.
Equipped with motorized pan/tilt.
Can be installed on both the ceiling and walls.
Configurable preset position (maximum16 positions), sequential pan,
and auto pan.
Equipped with a motion sensor that detects movement in the monitor
screen and issues an alarm.
Detects intruders using an external switch or a motion sensor,
automatically zooms in on the images, and notifies using alarm
output.
If a hard disk recorder is connected, alarm-triggered images can be
recorded according to the alarm output.
If connected to the internet or intranet, monitoring and/or camera
adjustment operation can be performed remotely.
Masking can be set for hiding images partially and protecting privacy.
(Maximum 8 masks)
Configurable preference settings with view on screen.
Access to the main menu is controlled by setting a password.
(VDC-DP9584N/VDC-DPN9585P)
Equipped with function for automatically switching between COLOR
and Black-and-White (DAY/NIGHT).
Complies with the IP66 international standard for dust and water
protection.
Characteristics
L5BP2_BQ2_US(GB).book 4 ページ 2006年9月4日 月曜日 午後4時24分
5
Getting Started
Information
Registering multiple preset positions:
RPRESET POSITION (see page 28)
Making the camera move successively along the
registered preset positions:
RAUTO MODE SEQUENTIAL PAN (see page 31)
Performing automatic panning:
RAUTO MODE AUTO PAN (see page 32)
Setting the camera to return to the specified monitoring
mode following manual operation on the angle of view:
RAUTO RETURN (see page 34)
Connecting to an external door switch or infrared
sensor:
RALARM (see page 35)
Making the unit issue a warning upon detecting
suspicious figures, etc.:
RALARM MOTION (see page 38)
Limiting main menu access to administrators:
RPASSWORD (see page 12)
Hiding image partially for privacy protection:
ROPTION PRIVACY MASK (see page 43)
Operating remotely using internet or intranet:
ROPTION NETWORK (see page 46)
(VDC-DP9584N/VDC-DPN9585P)
Switching between “Color” and “Black-and-White” mode
of DAY/NIGHT function using an external switch, etc.:
RCAMERA DAY/NIGHT (see page 25)
Useful Operations
L5BP2_BQ2_US(GB).book 5 ページ 2006年9月4日 月曜日 午後4時24分
6
Getting Started
Concerning Control Buttons for Configuration and Adjustment
Camera can be controlled remotely during setting or adjustment.
Please refer to the instruction manual for VAC-70.
Button operations with VAC-70 are the same as with the unit.
When configuration and adjustment are finished, always disconnect
the Camera Control Unit.
Regarding connection of the monitor, see the separate installation
manual.
When configuration and adjustment are finished, always disconnect
the monitor and install the dome cover.
Using the Camera Control Unit (VAC-70: Separately ordered) Using the Control Buttons on the Circuit Board
To display the main menu
VAC-70: Press the MENU button 1.
Main unit: Hold down the SET button 3 for over a second.
To operate the menu screen
Select the item and change the setting value by pressing the Select
button 2.
Enter the advanced settings screen by pressing the SET button 3.
To conduct pan/tilt and zoom
The pan/tilt and zoom functions can be operated using the Select
button 2 during live mode (with no settings screen displayed).
Press the SET button 3 to switch over between pan/tilt and zoom
operations.
<Pan/Tilt operations>
Pan: Press d(LEFT) or c(RIGHT)
Tilt: Press j(UP) or l(DOWN)
<Zoom operations>
Wide: Press d(LEFT)
Tele: Press c(RIGHT)
UP
DOWN
LEFT
RIGHT
SET
GND
MONITOR
OUT
1
3
2
(VAC-70)
(Main unit)
L5BP2_BQ2_US(GB).book 6 ページ 2006年9月4日 月曜日 午後4時24分
7
Getting Started
Accessing the Main Menu
1
Access the main menu.
2
Select item.
3
Open the advanced settings screen.
4
Specify values.
Note: After the expiration of a predetermined time interval (3 minutes)
without any operation, the settings screen goes off automatically
and returns to normal monitoring screen.
SET
·CAMERA
PRESET POSITION
AUTO MODE
AUTO RETURN
ALARM
PASSWORD
LANGUAGE
OPTION
PRESET
MENU
SET y
1 y
SEQ y
OFF
SET y
SET y
SET y
SET y
OFF
END
R
Main menu
Press and hold
the button for
about 1 second.
·CAMERA
PRESET POSITION
AUTO MODE
AUTO RETURN
ALARM
SET y
1 y
SEQ y
OFF
SET y
Cursor
Moves the cursor “q” using
the Select button UP and
DOWN to select the item.
·CAMERA
PRESET POSITION
AUTO MODE
AUTO RETURN
ALARM
SET y
1 y
SEQ y
OFF
SET y
SET
R
When “y” mark displays
Press the SET button
to open the
advanced settings
screen.
·SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
INT
OFF
SET y
ATW
NORM
0.45
Press the Select button
RIGHT and LEFT to switch
over to other values.
L5BP2_BQ2_US(GB).book 7 ページ 2006年9月4日 月曜日 午後4時24分
8
Getting Started
Accessing the Main Menu
5
Close the settings screen.
Once the settings are complete, set <MENU> to “END” and press
the SET button.
To return to the previous screen
Select <MENU> – “BACK” and press the SET button.
To reset settings (Factory Default Settings)
Select <PRESET> and choose “ON” instead of “OFF”, and press the
SET button.
Main menu guide
VDC-DP9584N/VDC-DPN9585P
Note: To reset all the settings, set <PRESET> to “ON” in the main menu
and press the SET button.
The <PRIVACY MASK> in <OPTION> and <PASSWORD> will
not be initialized.
·MENU END
PRESET
·MENU
OFF
END
SET
R
PRESET
·MENU
OFF
BACK
SET
R
·PRESET ON
·PRESET
MENU
ON
BACK
SET
R
Items Settings See page
CAMERA
Setting Camera Performance
(Synchronization, Backlight
Compensation, Iris Level, White
Balance, Gain, Gamma, Shutter
Speed, Aperture, DAY/NIGHT
)
14
PRESET POSITION
Registering Monitoring Positions
(No.1 - 16)
28
AUTO MODE
Automatic Monitoring
(Sequential Pan, Auto Pan)
30
AUTO RETURN
Returning to Specified Monitoring
Mode Automatically
34
ALARM Setting Alarm 35
PASSWORD Setting/Cancelling Password Lock 12
LANGUAGE Selecting Display Language 9
OPTION
TITLE Naming Cameras 10
PRIVACY
MASK
Hiding Image Partially
43
NETWORK Configuring the Network Settings 46
PRESET Initializing Settings 8
MENU
Closing a Screen/Returning to
Previous Screen
8
L5BP2_BQ2_US(GB).book 8 ページ 2006年9月4日 月曜日 午後4時24分
9
Getting Started
Selecting Display Language <LANGUAGE>
You can change the language displayed on the settings and adjusting screens. (Default setting: English)
1
Select a language and press the SET button.
RPressing the SET button will immediately change the language
displayed on the screen.
2
Select <MENU> – “RETOUR” (“BACK” or
“ATRAS”) and press the SET button.
RReturns to the main menu.
If you want to close the settings screen
Set <MENU> to “END” and press the SET button.
·LANGUAGE
SET
RR
CAMERA
PRESET POSITION
AUTO MODE
AUTO RETURN
ALARM
PASSWORD
·LANGUAGE
OPTION
PRESET
MENU
SET y
1 y
SEQ y
OFF
SET y
SET y
SET y
SET y
OFF
END
LANGUAGE
·LANGUAGE
LANGUE
IDIOMA
MENU
ENGLISH
FRENCH
SPANISH
BACK
SET
LANGUAGE
LANGUAGE
·LANGUE
IDIOMA
ENGLISH
FRENCH
SPANISH
R
LANGUAGE
LANGUAGE
·LANGUE
SPRACHE
ENGLISH
FRENCH
GERMAN
(In case FRENCH is selected)
VDC-DP9584N/VCC-P9574N
VDC-DPN9585P/VCC-PN9575P
SET
·MENU
R
LANGUE
LANGUAGE ANGLAIS
LANGUE FRANCAIS
IDIOMA ESPAGNOL
LANGUE
LANGUAGE ANGLAIS
LANGUE FRANCAIS
SPRACHE ALLEMAND
·MENU RETOUR
VDC-DP9584N/VCC-P9574N
VDC-DPN9585P/VCC-PN9575P
(In case FRENCH is selected)
For accessing the main menu, see pages 7 – 8.
L5BP2_BQ2_US(GB).book 9 ページ 2006年9月4日 月曜日 午後4時24分
10
Getting Started
Naming Cameras <OPTION> – <TITLE>
You can give a name (title) to each camera. The specified names are displayed on the monitor
so that you can easily distinguish the monitoring images when you use multiple cameras.
1
Select <OPTION> and press the SET button.
2
Set <TITLE> to “ON” and press the SET button.
RThe “TITLE SETTING” screen appears.
3
Choose a character(s) from the “Character
Selecting Field”.
A character is selectable when two arrows, (w) and (y), point at the
character.
RThe characters are displayed starting from (x) in the “ID string”.
To overwrite the character
Select <ID> and move (x) onto it in the “ID string”, and then choose any new
letter.
ROOM1
ROOM2
ROOM1 ROOM2
·OPTION
SET
R
CAMERA
PRESET POSITION
AUTO MODE
AUTO RETURN
ALARM
PASSWORD
LANGUAGE
·OPTION
PRESET
MENU
SET y
1 y
SEQ y
OFF
SET y
SET y
SET y
SET y
OFF
END
·TITLE
ON
SET
R
OPTION
·TITLE
PRIVACY MASK
NETWORK
ON y
SET y
SET y
SET
R
TITLE SETTING
y
wABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-
ID ????????????????
x
POSITION
SET y
Character
Selecting Field
ID string
For accessing the main menu, see pages 7 – 8.
L5BP2_BQ2_US(GB).book 10 ページ 2006年9月4日 月曜日 午後4時24分
11
Getting Started
Naming Cameras <OPTION> – <TITLE>
4
Repeat step 3 to complete the name.
You can enter up to 16 characters.
Example: ROOM1
RThe letters “???....” do not appear on the monitor screen, but if
you select “ON” for the <TITLE> and then enter no letter at all,
the monitor will show you “???....”.
If you want the name to be displayed on the monitor in two lines
Select <ID> and enter the line feed mark (v) in the “ID string” wherever you
want to start a new line.
5
Select <POSITION> and press the SET button.
ROn the normal monitoring screen, the name will be displayed.
6
Determine the location where the name should
be displayed, and then press the SET button.
RReturns to the settings screen.
To delete the name specified
Set <PRESET> to “ON”, and press the SET button.
RAll the characters in the “ID string” will be displayed with “?”.
7
Set <MENU> to “END” and press the SET button.
RCloses the settings screen and displays the name on the
normal monitoring screen.
If you want to return to the previous screen
Select <MENU> – “BACK” and press the SET button.
TITLE SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-v
·ID ROOM1???????????
x
ID ROOM1???????????
x
·POSITION
PRESET
MENU
SET y
OFF
BACK
·POSITION
SET
R
MEMO:
If an alarm signal is input when <ALARM SIGN> is “ON” (see page
41), the camera name on the screen will blink during the time set in
<DURATION> (see page 40). When the camera name is not
specified, “???....” will blink.
If <MOTION> is “ON” (see page 38), the camera name on the screen
will also blink when the motion sensor detects movement.
When <PRIVACY MASK> is “ON” (see page 43), the camera name
will not be displayed.
ROOM1
SET
R
L5BP2_BQ2_US(GB).book 11 ページ 2006年9月4日 月曜日 午後4時24分
12
Getting Started
Setting/Cancelling Password Lock <PASSWORD>
You can lock the access to the main menu by specifying a password. You will be prompted to enter the password to access the
main menu.
1
Select <PASSWORD> and press the SET button.
2
Select <PASSWORD LOCK> and press the SET
button.
RThe password input screen appears.
3
Enter the password and press the SET button.
When setting a password for the first time, you must enter the
factory default password “1234”.
RYou will see the “OK” message.
4
Press the SET button.
RDisplays <PASSWORD LOCK> – “ON”.
•“1234” is a factory default password; it is recommended you
change it to your own password. Advance to step 5.
If you want to finish the setting, advance to step 8.
SET
R
·PASSWORD
CAMERA
PRESET POSITION
AUTO MODE
AUTO RETURN
ALARM
·PASSWORD
LANGUAGE
OPTION
PRESET
MENU
SET y
1 y
SEQ y
OFF
SET y
SET y
SET y
SET y
OFF
END
PASSWORD
·PASSWORD LOCK
PASSWORD CHANGE
MENU
OFF y
SET y
BACK
·PASSWORD
LOCK
SET
R
Note:
If you enter an incorrect password, you will see the “NG” message. If
you fail to enter the valid password three times successively, the
prompt display will disappear. Start again from the beginning.
PASSWORD
· 1234
x
SET y
SET
R
For accessing the main menu, see pages 7 – 8.
L5BP2_BQ2_US(GB).book 12 ページ 2006年9月4日 月曜日 午後4時24分
13
Getting Started
Setting/Cancelling Password Lock <PASSWORD>
5
Select <PASSWORD CHANGE> and press the
SET button.
RThe current password input screen appears.
6
Enter the current password and press the SET
button.
RThe new password input screen appears.
7
Enter a new password (4 numerical values) and
press the SET button.
Write down the new password before you forget it.
RYou will see the “OK” message.
8
Set <MENU> to “END” and press the SET button.
RCloses the settings screen and returns to the normal monitoring
screen.
If you want to return to the previous screen
Select <MENU> – “BACK” and press the SET button.
To cancel the password lock
Press the SET button on <PASSWORD LOCK> – “ON”, and then
enter the password.
RYou will see “OFF” instead of “ON”.
PASSWORD
PASSWORD LOCK
·PASSWORD CHANGE
ON y
SET y
·PASSWORD
CHANGE
SET
R
PASSWORD
<NOW PASSWORD>
· 1234
x
SET y
SET
R
PASSWORD
<NEW PASSWORD>
· ????
x
SET y
L5BP2_BQ2_US(GB).book 13 ページ 2006年9月4日 月曜日 午後4時24分
14
Setting Camera Performance <CAMERA>
Open the screen for setting and adjusting the camera performance.
1
Select <CAMERA> and press the SET button.
RThe settings screen for camera performance appears.
If you want to return to the previous screen
Select <MENU> – “BACK” and press the SET button.
If you want to close the settings screen
Set <MENU> to “END” and press the SET button.
Camera performance screen guide
·CAMERA
SET
R
·CAMERA
PRESET POSITION
AUTO MODE
AUTO RETURN
ALARM
PASSWORD
LANGUAGE
OPTION
PRESET
MENU
SET y
1 y
SEQ y
OFF
SET y
SET y
SET y
SET y
OFF
END
·SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
OFF
BACK
Items Settings See page
SYNC Adjusting Synchronization Error 15
BLC Backlight Compensation 16
IRIS Adjusting Iris Level 17
WHITE BALANCE Setting White Balance 18
AGC GAIN Setting Gain Value 21
GAMMA Correcting Gamma Characteristic 22
SHUTTER Specifying Shutter Speed 23
APERTURE Accentuating Subject Outline 24
(VDC-DP9584N/
VDC-DPN9585P)
DAY/NIGHT
Adjusting DAY/NIGHT Function 25
For accessing the main menu, see pages 7 – 8.
L5BP2_BQ2_US(GB).book 14 ページ 2006年9月4日 月曜日 午後4時24分
15
Setting Camera Performance <CAMERA>
By default, the synchronization adjustment for the camera is performed internally (INT). However, you must make adjustments
in the L-L- SETTING screen, if the monitor screen seems out of sync after switching over among multiple cameras using AC 24
V. Select a camera as a reference and adjust the others based on the selected one.
Note: The Line-Lock setting is not available for DC 12 V operation.
1
Set <SYNC> to “L-L” and press the SET button.
RThe “L-L SETTING” screen appears.
2
Adjust synchronization (0 – 524).
Make adjustments so that the vertical synchronization of the
monitor screen does not move up or down.
3
Select <MENU> – “BACK” and press the SET
button.
RReturns to the camera performance screen.
If you want to close the settings screen
Set <MENU> to “END” and press the SET button.
Adjusting Synchronization Error <SYNC>
·SYNC L-L
·SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
PRESET
MENU
L-L y
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
OFF
BACK
SET
R
Lamp
INT
Internally synchronized
Lamp turned on.
L-L (Line-Lock)
Synchronizes the unit with power frequency
Lamp blinking.
L-L SETTING
<V SYNC PHASE>
· 250
For accessing the main menu, see pages 7 – 8.
L5BP2_BQ2_US(GB).book 15 ページ 2006年9月4日 月曜日 午後4時24分
16
Setting Camera Performance <CAMERA>
If the images of subjects are not clear because of backlight, compensate for it by
adjusting conditions or changing the compensation method.
1
Select <BLC> and specify the compensation
method.
If you want to return to the previous screen
Select <MENU> – “BACK” and press the SET button.
If you want to close the settings screen
Set <MENU> to “END” and press the SET button.
Backlight Compensation <BLC>
SYNC
·BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
OFF
BACK
·BLC
CENT (Center zone metering)
Compensation is made based on the optical measurement that is
focused on the central area of the screen (the image of subject to
be compensated is located in the center of the screen).
MULT1 (Multi-spot metering, Normal mode)
Compensation is made based on the optical measurement and
assessment of the entire screen (the image of subject to be
compensated is not limited to a center of the screen location).
MULT2 (Multi-spot metering, High mode)
Compared to MULT1, faster backlight compensation is possible
against a lesser amount of light.
OFF
No compensation is performed for backlight.
For accessing the main menu, see pages 7 – 8.
L5BP2_BQ2_US(GB).book 16 ページ 2006年9月4日 月曜日 午後4時24分
17
Setting Camera Performance <CAMERA>
If you need to adjust the brightness, follow the steps below.
1
Select <IRIS> and press the SET button.
RThe “IRIS SETTING” screen appears.
2
Adjust the brightness (iris) (0 – 100).
The greater the number, the brighter it gets.
3
Select <MENU> – “BACK” and press the SET
button.
RReturns to the camera performance screen.
If you want to close the settings screen
Set <MENU> to “END” and press the SET button.
Adjusting Iris Level <IRIS>
·IRIS
SYNC
BLC
·IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
OFF
BACK
SET
R
IRIS SETTING
<LEVEL>
· 20
PRESET
MENU
OFF
BACK
Note:
Under extremely bright lighting, unfavorable phenomena may occur such
as swaths of smear on the screen, because light intensity entering the
lens is too high to be controlled. Reduce the intensity by changing the
angle of the lighting source or by other means.
If the images of subjects under fluorescent lighting are flickering, replace
fluorescent lighting with incandescent lighting.
For accessing the main menu, see pages 7 – 8.
L5BP2_BQ2_US(GB).book 17 ページ 2006年9月4日 月曜日 午後4時24分
18
Setting Camera Performance <CAMERA>
With its default Auto-Tracing White Balance (ATW) setting, this unit is able to obtain natural colors even when the light source
is changed. However, you may manually change the white balance settings or its mode to obtain better tone, especially when
the screen color does not match actual objects.
1
Select <WHITE BALANCE> and specify a mode.
2
For advanced settings (AWC or MWB), press the
SET button.
REach corresponding settings screen will appear.
Advances to A on next page when selecting “AWC”.
Advances to B on page 20 when selecting “MWB”.
If you want to return to the previous screen
Select <MENU> – “BACK” and press the SET button.
If you want to close the settings screen
Set <MENU> to “END” and press the SET button.
Setting White Balance <WHITE BALANCE>
SYNC
BLC
IRIS
·WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
OFF
BACK
·WHITE
BALANCE
ATW (Auto-Tracing White Balance)
Automatic setting for white balance.
AWC (One-Push Adjustment): (see next page)
Adjusts white balance by shooting white paper or wall.
3200 (Halogen light or incandescent lamp, etc.)
(fixed)
Targeted at around 3200 K of color temperature.
5600 (Daytime sunlight) (fixed)
Targeted at around 5600 K of color temperature.
FLUO (Fluorescent lamp) (fixed)
Targeted at around 4200 K of color temperature.
MWB (Manual White Balance): (see page 20)
Fine-adjusts red and blue manually.
For accessing the main menu, see pages 7 – 8.
L5BP2_BQ2_US(GB).book 18 ページ 2006年9月4日 月曜日 午後4時24分
19
Setting Camera Performance <CAMERA>
1
Select <AWC LOCK>.
2
Point a camera to a white paper or wall to project
an image on the whole screen, and press the SET
button.
RThe cursor “q” lights off, and white balance adjustment will
start. The adjustment will end after about 2 seconds when “q
lights again.
If the adjustment does not yield a satisfactory result, press the
SET button again.
To perform fine adjustment of color
In the “AWC SETTING” screen, select <GO TO MWB> – “SET”, and
press the SET button.
RThe “MWB SETTING” screen appears. Specify values manually
(see next page).
3
Select <MENU> – “BACK” and press the SET
button.
RReturns to the camera performance screen.
If you want to close the settings screen
Set <MENU> to “END” and press the SET button.
A One-Push Adjustment (AWC)
AWC SETTING
·AWC LOCK
GO TO MWB
SET
SET y
·AWC LOCK
SET
White paper or wall
MEMO: Transferring to the “MWB SETTING” screen through <GO
TO MWB>, white balance mode (see page 18) will be
changed to “MWB”.
L5BP2_BQ2_US(GB).book 19 ページ 2006年9月4日 月曜日 午後4時24分
1 / 1

Sanyo Pan-Focus VCC-P9574N User manual

Category
Security cameras
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document