RGBlink XSET is a unified management and control platform for MSP 225 and MSP 226 devices. This user-friendly software provides visual control and management on mainstream Windows or macOS platforms, allowing you to maximize the performance of your equipment. With XSET, you can manage multiple devices simultaneously, configure input and output settings, adjust network parameters, and perform system maintenance tasks such as firmware updates and factory resets.
RGBlink XSET is a unified management and control platform for MSP 225 and MSP 226 devices. This user-friendly software provides visual control and management on mainstream Windows or macOS platforms, allowing you to maximize the performance of your equipment. With XSET, you can manage multiple devices simultaneously, configure input and output settings, adjust network parameters, and perform system maintenance tasks such as firmware updates and factory resets.
XSET
USER MANUAL
Article No: RGB-RD-UM-XSET E001
Revision No: V1.0
XSET User Manual
1
CONTENTS
CONTENTS ..................................................................................................................................................... 1
Chapter 1 Software Overview ........................................................................................................................ 2
Chapter 2 Installing Software ........................................................................................................................ 3
Chapter 3 Using Software .............................................................................................................................. 8
3.1 XSET Control MSP 225 ..................................................................................................................... 8
Log in the Software........................................................................................................................ 8
Web Links ...................................................................................................................................... 9
Connect the Device ....................................................................................................................... 9
I/O Set.......................................................................................................................................... 11
Network Set ................................................................................................................................. 12
System Set ................................................................................................................................... 13
Factory Reset ............................................................................................................................... 14
Logout .......................................................................................................................................... 15
3.2 XSET Control MSP 226 ................................................................................................................... 16
Log in the Software...................................................................................................................... 16
Web Links .................................................................................................................................... 17
Connect the Device ..................................................................................................................... 17
Output Set ................................................................................................................................... 19
Network Set ................................................................................................................................. 20
System Set ................................................................................................................................... 20
Factory Reset ............................................................................................................................... 22
Logout .......................................................................................................................................... 22
Chapter 4 Contact Us ................................................................................................................................... 23
Chapter 5 Revision History........................................................................................................................... 24
XSET User Manual
2
Chapter 1 Software Overview
XSET software supports the unified management and control platform for MSP 225 and MSP 226,
which can realize the visual control and management in mainstream Windows or macOS platform
much more conveniently, and give full play to the equipment performance.
Features:
1) Form a unified interface and style.
2) Visual control, easy to operate.
3) Support Windows and macOSX platform.
4) Support management control for MSP 225 and MSP 226.
XSET User Manual
3
Chapter 2 Installing Software
Environment Requirements:
Processor: 1 GHz or above 32 bit or 64 bit processor
Memory: 2 GB or more
Graphics: Support DirectX 9 128M or above (open AERO effect)
Hard disk space: Above 16G (primary partitions, NTFS format)
Monitor: Resolution must be 1280 x720 pixel or above (it can not display normally if the resolution is lower than
1280 x720)
Operating system: Windows 7 or above (full version, not Ghost version or compact version)
Double click icon, it will pop-up the installer language box, select the language, for example, select
“English”, and click “OK” to confirm.
Click “Next” to install:
Select “Browse...” to select the XSET software install location:
Chapter 2 Installing Software
XSET User Manual
4
Click “Install”:
During installation, it will pop up the window of InstallShield Wizard for Virtual Com port:
Chapter 2 Installing Software
XSET User Manual
5
(1) If user install the XSET software for the first time, click “Next”:
Then click “Install", as shown in the figure below:
Click “Finish” and complete the installation, as shown in the figure below:
Chapter 2 Installing Software
XSET User Manual
6
Then it will pop up the window of installation wizard for device driver, click “Next” to complete the
installation.
(2) If user have installed the XSET software before, click “Cancel”, and it will pop up the window as below:
Click “Yes” to cancel installation.
Click “Finish” to exit installation.
Then it will pop up the window of installation wizard for device driver, click “Cancel” to exit the installation.
Click “Finish” and is ready to run the XSET management software:
Chapter 2 Installing Software
XSET User Manual
7
XSET User Manual
8
Chapter 3 Using Software
3.1 XSET Control MSP 225
Log in the Software
Double click the icon on the desktop. Log in interface will be enter after opening, the
user name is Admin, and there is no password, select “MSP 225”, and enter into the software by
clicking “Login”.
If user want to change the language to Chinese, click the drop down arrow after “Language” and
select “Chinese”, as shown in the figure below, then click “Login” to enter into the software.
Chapter 3 Using Software
XSET User Manual
9
XSET management software interface is shown as follows.
XSET management software contains the functions including: web links, search, I/O set, network
set, system set, factory reset and logout. In the following parts, we will introduce these in detail.
Web Links
XSET management software sets up the web links. Click the web links icon on the
top left corner, and enter the company’s website, as shown in the figure below:
Connect the Device
First, set up the device IP, and ensure the IP of the computer and device is on the same network
segment. Connect the XSET management software to the computer with the network cable and
power up the device.
Then, click the shortcut “Search” on the operation interface.
Chapter 3 Using Software
XSET User Manual
10
Then it will search the device, and show the device name, device number and connect
information after search, as shown in the figure below:
Finally, click the device to connect, as shown in the figure below:
The software will enter to the I/O Set interface after connection, as shown in the figure below:
Chapter 3 Using Software
XSET User Manual
11
I/O Set
Click the “I/O Set”, and enter to the interface as follows:
User can view the input information and set output width/height and FTS, specific as follows:
Input
Chapter 3 Using Software
XSET User Manual
12
Display the input information, including input signal, width/height and Freq.
Output
Click the pull-down menus, and select the width/height and FTS. Click “Setting” to confirm.
Network Set
Click “Network Set”, and enter the interface as follows:
Click “Network Set”, user can view the URL play address, and set IP address, Mask, GateWay, DNS
and MAC. As shown in the figure below:
Chapter 3 Using Software
XSET User Manual
13
System Set
Click “System Set”, and enter the interface as follows:
SerialPort Set, System Info and role management are included in system set, specific as follows:
SerialPort Set
Click “SerialPort Set”, and pop-up window as follows:
Chapter 3 Using Software
XSET User Manual
14
Select the corresponding serial number. If select “Search by this configuration”, the software will
search all the devices with corresponding serial number.
System Info
Click “System Info”, and pop-up window as follows:
Display the device type, software version, serial number, software, hardware and board version.
Role Management
Click “Role Management”, and pop-up window as follows:
Add: Select the user type as “Admin’ or “Users” in User’s List, and input the user name and
password. Click “Add” after setting.
Edit: Select the admin or users in user’s list, then edit the password or user type, click “Edit” after
setting.
Del: Select the admin or users in user’s list, then click “Del”, the selected user will be deleted.
Factory Reset
Click “Factory Reset”, and pop-up window as follows:
Chapter 3 Using Software
XSET User Manual
15
Select “OK”, all the settings will be recover to factory setting.
Logout
Click the “Logout”, and enter the interface as follows:
Click “OK” will logout the software.
Chapter 3 Using Software
XSET User Manual
16
3.2 XSET Control MSP 226
Log in the Software
Double click the icon on the desktop. Log in interface will be enter after opening, the
user name is Admin, and there is no password, select “MSP 226”, and enter into the software by
clicking “Login”.
If user want to change the language to Chinese, click the drop down arrow after “Language” and
select “Chinese”, as shown in the figure below, then click “Login” to enter into the software.
Chapter 3 Using Software
XSET User Manual
17
XSET management software interface is shown as follows.
XSET management software contains the functions including: web links, search, output set,
network set, system set, factory reset and logout. In the following parts, we will introduce these
in detail.
Web Links
XSET management software sets up the web links. Click the web links icon on the
top left corner, and enter the company’s website, as shown in the figure below:
Connect the Device
First, set up the device IP, and ensure the IP of the computer and device is on the same network
segment. Connect the MSP management software to the computer with the network cable and
power up the device.
Then, click the shortcut “Search” on the operation interface.
Chapter 3 Using Software
XSET User Manual
18
Then it will search the device, and show the device name, device number and connect
information after search, as shown in the figure below:
Finally, click the device to connect, as shown in the figure below:
The software will enter to the Output Set interface after connection, as shown in the figure
below:
Chapter 3 Using Software
XSET User Manual
19
Output Set
Click “Output Set”, and enter to the interface as follows:
Click “Output Set”, and pop-up window as follows:
Display Mode: Click the pull-down menus, diff windows and same windows can be selected.
Window Set: Click the pull-down menus, one window, four windows and eight windows can be
selected.
HDMI1/HDMI2: Set the width/height of HDMI1/HDMI2, click “Set” to confirm.
HDMI1-URL/HDMI2-URL: Check the address of the network camera, and input the address in
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
RGBlink XSET is a unified management and control platform for MSP 225 and MSP 226 devices. This user-friendly software provides visual control and management on mainstream Windows or macOS platforms, allowing you to maximize the performance of your equipment. With XSET, you can manage multiple devices simultaneously, configure input and output settings, adjust network parameters, and perform system maintenance tasks such as firmware updates and factory resets.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Tripp Lite B051-000 User manual
-
Godex EZPL User manual
-
Grundfos CIU 500 Functional Profile And User Manual
-
ATEN CN6000 Quick start guide
-
Dell Inspiron Chromebook 11 3181 2-in-1 User manual
-
ATEN CN8000 Quick start guide
-
ATEN CN8000A Quick start guide
-
Dell Chromebook 11 3189 Owner's manual
-
-