Dakota Digital VHX-40C Mounting Manual

Manual # 650488A

VHX-40C

Dakota Digital VHX Instrument Installation

For 1940 Chevrolet Car

Your new VHX-40C kit includes:

Installation

Control Box

CAT5 Cable

Universal Sender Pack

Installation Manuals

VHX Display

1. Remove the stock gauge cluster from the dash and retain the four (4) factory nuts for reassembly.

Front View

Back View

Switch Assembly

Manual # 650488A

WARNING: This product can expose you to chemicals including lead, which is known to the State of

California to cause cancer and birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

3. Connect the CAT5 cable to the back of the VHX

system. Take care when routing the CAT5 cable

to the control box mounting location.

2. Mount the VHX system to the back of the

dash using the stock hardware on the (4)

four mounting tabs.

4. Refer to the main manual for wiring instructions to complete the VHX installation.