Hitachi VM-H57A User manual

TABLE OF CONTENTS

HITACHI

Instruction Manual

8mm Video Camera/Recorder

VM-H57A

Hitachi Home Electronics (America), Inc. HITACHI (HSC) CANADA INC.

3890 Steve Reynolds Blvd., Norcross, GA 30093 3300 Trans Canada Highway,

Pointe Claire,

Tel. 404-279-5600 Quebec, H9R 1B1, CANADA

Tel. 514-697-9150

HITACHI SALES CORPORATION OF

HAWAII, INC.

3219 Koapaka Street, Honolulu, Hawaii 96819

Tel. 808-836-3621

E145554/E72118

P4708922 © Hitachi, Ltd. 1993 Printed in Japan KM-R(N)

TABLE OF CONTENTS

TABLE OF CONTENTS............................................................................................................................2

For Your Safety...........................................................................................................................................4

Read This First............................................................................................................................................6

Before You Begin........................................................................................................................................7

IMPORTANT SAFEGUARDS ..................................................................................................................7

IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER ......................................12

Features...............................................................................................................................................13

Components and Accessories..........................................................................................................14

Getting Started...........................................................................................................................................15

Charging the Battery..........................................................................................................................15

Additional Information........................................................................................................................16

Adjusting the Electronic Viewfinder.................................................................................................18

Eyepiece Adjustment.........................................................................................................................18

Attaching the Shoulder Strap............................................................................................................18

Attaching the Optional Wide or Tele Converter Lens...................................................................20

Loading Batteries................................................................................................................................20

Remote Control Battery.....................................................................................................................20

Camera/Recorder Battery .................................................................................................................21

Removing the Battery ........................................................................................................................21

Checking the Battery's Charge.........................................................................................................21

Using Alternative Power Sources....................................................................................................23

Using the AC Adapter/Charger.........................................................................................................23

Using Alkaline Dry-Cell Batteries.....................................................................................................23

Using a Car Battery............................................................................................................................24

Inserting and Removing Cassettes..................................................................................................25

Inserting a Cassette...........................................................................................................................25

Removing a Cassette.........................................................................................................................25

Protecting Recorded Material...........................................................................................................26

Attaching the Optional DC Camera Light .......................................................................................26

Removing the DC Camera Light......................................................................................................27

Replacing the DC Camera Light Bulb.............................................................................................27

Using Memory.....................................................................................................................................28

Setting the Date and Time................................................................................................................29

Correcting the Date and Time ..........................................................................................................30

Automatic Date Recording................................................................................................................30

Using the Linear Time Counter........................................................................................................30

Remaining Tape .................................................................................................................................31

Using the Display Button...................................................................................................................31

Getting Started - Identifying Controls.......................................................................................................32

Basic Techniques.......................................................................................................................................36

Making a Basic Recording................................................................................................................36

Playing Back Your Recording...........................................................................................................37

Connecting to a Television with a VCR Attached..........................................................................37

Connecting to a Television with Audio In and Video In Jacks.....................................................37

TABLE OF CONTENTS

Connecting to a Television without Audio In and Video In Jacks...............................................38

Simple Playback (Using the Electronic Viewfinder)......................................................................38

Using Still.............................................................................................................................................38

Using Forward and Reverse Search...............................................................................................39

Advanced Techniques ...............................................................................................................................39

Using the Power Zoom......................................................................................................................40

Using the Digital Zoom ......................................................................................................................40

Using the INST. ZOOM (Instant Zoom) Button..............................................................................41

Using Auto Focus...............................................................................................................................42

Using Manual Focus..........................................................................................................................43

Using the Electronic Image Stabilizer .............................................................................................44

Using Fade ..........................................................................................................................................45

Fading In..............................................................................................................................................45

Fading Out...........................................................................................................................................45

Using Instant Review.........................................................................................................................46

Using Quick Edit.................................................................................................................................46

Using Macro ........................................................................................................................................46

Creating and Recording Titles..........................................................................................................47

Creating a Title....................................................................................................................................47

Correcting Errors ................................................................................................................................48

Recording Title on a Tape in the Camera/Recorder.....................................................................48

Recording a Title while Transferring a Tape..................................................................................49

Using the Wireless Remote Control ................................................................................................50

Dubbing from the Camera/Recorder to a VCR..............................................................................50

Using Synchro Edit.............................................................................................................................51

Controlling Your TV with the Camera/Recorder's Remote..........................................................52

Programming the Remote Control...................................................................................................52

Controlling the TV...............................................................................................................................53

Using Audio/Video Dubbing..............................................................................................................54

Recording Television Programs.......................................................................................................55

General Maintenance.................................................................................................................................55

Cleaning the Camera/Recorder Heads...........................................................................................55

Cleaning the Lens and Picture Tube of the Electronic Viewfinder.............................................57

Periodic Maintenance........................................................................................................................57

Troubleshooting..................................................................................................................................58

Specifications............................................................................................................................................61

Accessories Add Excitement.....................................................................................................................63

To Order in the United States...........................................................................................................63

For Your Safety

The CAMERA/OFF/VIDEO switch turns the camera/recorder on and off, leaving the

date/time feature unaffected. If the unit is to be left unattended for a long period of time,

Tturn the camera/recorder off and attach the lens cap.

Illustrated below is the label on the bottom of your unit.

This symbol warms the user that uninsulated voltage within the unit may have

sufficient magnitude to cause electrical shock. Therefore, it is dangerous to make any kind

of contact with any inside part of this unit.

This symbol alerts the user that important literature concerning the operation and

maintenance of this unit has been included. Therefore, it should be read carefully to avoid

any problems.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: Many television programs and films are copyrighted. In certain circumstances,

copyright law may apply to private in-home videotaping of copyrighted materials.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, AND FULLY INSERT PLUG.

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus as set out in the Radio Interference regulations of the Canadian

Department of Communications.

For Your Safety

Caution to the user: Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

This camera/recorder can use 8mm and video cassettes. It automatically

determines the loaded cassette is 8mm or and records and plays it back correctly.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO

RAIN OR MOISTURE.

MOISTURE

When the camera/recorder is exposed to rapid temperature changes from cold to warm,

drops of moisture can form inside the mechanism. A flashing "DEW" indication in the

viewfinder indicates that moisture has condensed on the recorder mechanism, which

could result in tape damage. Since condensation builds up gradually, the indication

does not appear immediately when condensation starts. When the temperature or

humidity of the room changes abruptly, turn the power on and check that the "DEW"

indication does not appear, then wait for about an hour for safety before using the

camera/recorder. When the "DEW" indication in the viewfinder is flashing the unit will

not operate. When this happens, slide the "EJECT" switch, remove the tape, and wait

for the moisture to dry...the "DEW" indication in the viewfinder will stop flashing.

Read This First

Thank you for buying a Hitachi product. You've chosen the best 8 mm video

camera/recorder for you, and we want to help you make the most of your purchase.

Please take time to become familiar with the manual and how it is set up. Keep it handy

for future reference.

To guide you, we've included:

• A "Before You Begin" section containing important cautions for your family's safety as

well as instruction for getting your video camera/recorder ready for use. Please read

and understand this section thoroughly before moving on.

• A "Getting Started" section to familiarize yourself with the controls and prepare you for

recording.

• A "Basic Techniques" section to allow you to use your video camera/recorder quickly

and confidently before advancing to the more sophisticated features of the Hitachi VM-

H57A.

• "Advanced Techniques" to help you with some of the exciting, sophisticated features

of the Hitachi VM-H57A. We hope you will take the time to learn about these functions

since they have been designed for you. You can use the video camera/recorder without

reading this section.

• A "General Maintenance" section to help keep your purchase in good repair.

We want this manual to be as helpful as possible, so it includes two easy ways to find

the information you need:

• A quick index for the information you use most often (this page).

• A detailed table of contents directing you to specific information quickly (page 8).

Get to know your video camera/recorder by using this manual, and get to know Hitachi.

We appreciate your business.

Quick Index

Charging the Battery.....10

Making a Basic Recording.....24

Playing Back Your Recording.....24

Using Power Zoom.....30

Using Digital Zoom.....30

Using the Wireless Remote Control.....37

Dubbing from Camera/Recorder to VCR.....38

Before You Begin

Any problems that occur as a result of any of the following conditions will not be covered

by our warranty.

 Be careful that no water, dust or sand enters the camera/recorder.

 When you shoot at a scene which contains an extremely bright object such as the sun

or a light source, a bright vertical bar may appear in the picture.

Your camera/recorder is functioning properly, but the solid-state pickup device (CCD)

usually causes this as an inherent characteristic. Try to avoid shooting an excessive

bright object directly.

 Be sure not to leave it in a place where the temperature exceeds 120° (49°C), or the

pickup device may be damaged.

Dangerous includes:

• Inside a car with the windows closed and in direct sunshine.

• Near heating appliances.

 Do not leave the viewfinder lens facing sunlight for a prolonged period, or the

phosphorescent surface of the cathode ray tube may be damaged.

IMPORTANT SAFEGUARDS

In addition to the careful attention devoted to quality standards in the manufacture of

your video product, safety is a major factor in the design of every instrument. But,

safety is your responsibility too.

This page lists important information that will help to assure your enjoyment and proper

use of a Video Camera/Recorder and accessory equipment. Please read it carefully

before operating your video product and keep it in a handy place for future reference.

INSTALLATION

IMPORTANT SAFEGUARDS

1 Read and Follow Instructions -- All the safety and operating instructions should be

read before the video product is operated. Follow all operating and use instructions.

2 Retain Instructions -- The safety and operating instructions should be retained for

future reference.

3 Heed Warnings -- Comply with all warnings on the video product and in the

operating instructions.

4 Polarized Plug -- This video product is equipped with a polarized alternating-current

line plug (a plug having one blade wider than the other). This plug will fit into the power

outlet only one way. This is a safety feature. If you are unable to insert the plug fully into

the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician

to replace your obsolete outlet. To prevent electric shock do not use this polarized plug

with an extension cord, receptacle or other outlet unless the blades can be fully inserted

without blade exposure. If you need an extension, use a polarized cord.

5 Power Sources -- This video product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of power supply to

your home, consult your video dealer or local power company. For video products

intended to operate from battery power, or other sources, refer to the operating

instructions.

6 Overloading -- Do not overload wall outlets and extension cords as this can result in

a risk of fire or electric shock. Overloaded AC outlets and extension cords are

dangerous, and so are frayed power cords, damaged or cracked wire insulation and

broken plugs. They may result in a shock or fire hazard. Periodically examine the cord

and have it replaced by your service technician if appearance indicates damage or

deteriorated insulation.

7 Power-Cord Protection -- Power-supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience receptacles, and the point where they

exit from the appliance.

8 Ventilation -- Slots and openings in the cabinet are provided for ventilation to ensure

reliable operation of the video product and to protect it from overheating. These

openings must not be blocked or covered. The openings should never be blocked by

placing the video product on a bed, sofa, rug or other similar surface. This video product

should never be placed near or over a radiator or heat register. This video product

should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided or the video product manufacturer's instructions have been

IMPORTANT SAFEGUARDS

followed.

9 Attachments -- Do not use attachments unless recommended by the video product

manufacturer as they may cause hazards.

IMPORTANT SAFEGUARDS

Caution: Maintain electrical safety. Powerline operated equipment or accessories

connected to this unit should bear the UL listing mark or CSA certification mark on the

accessory itself and should not have been modified so as to defeat the safety features. This

will help avoid any potential hazard from electric shock or fire. If in doubt, contact qualified

service personnel.

10 Water and Moisture -- Do not use this video product near water - for example, near

a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a

swimming pool, and the like.

11 Accessories -- Do not place this video product on an unstable card, stand, tripod,

bracket, or table. The video product may fall, causing serious injury to a child or adult,

and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer, or sold with the video product. Any mounting

of the product should follow the manufacturer's instructions, and should use a mounting

accessory recommended by the manufacturer.

11A An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart combination to

overturn.

12 Outdoor Antenna Grounding -- If an outside antenna or cable system is

connected to the video product, be sure the antenna or cable system is grounded so as

to provide some protection against voltage surges and built-up static charges. Section

810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with

respect to proper grounding of the mast and supporting structure, grounding of the lead-

in wire to an antenna discharge unit, size of grounding conductors, location of antenna-

discharge unit, connection to grounding electrodes, and requirements for the grounding

electrode. See example below:

EXAMPLE OF ANTENNA GROUNDING

13 Power Lines -- An outside antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside antenna system, extreme care

should be taken to keep from touching or approaching such power lines or circuits as

contact with them might be fatal. Installing an outdoor antenna can be hazardous and

should be left to a professional antenna installer.

USE

IMPORTANT SAFEGUARDS

14 Cleaning -- Unplug this video product from the wall outlet before cleaning. Do not

use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

15 Object and Liquid Entry -- Never push objects of any kind into this video product

through openings as they may touch dangerous voltage points or short-out parts that

could result in a fire or electric shock. Never spill liquid of any kind on the video

product.

16 Lightning -- For added protection for this video product during a lightning storm, or

when it its left unattended and unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable-system. This will prevent damage to the

video product due to lightning and power-line surges.

SERVICE

17 Servicing -- Do not attempt to service this video product yourself as opening or

removing covers may expose you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

18 Conditions Requiring Service -- Unplug this video product from the wall outlet and

refer servicing to qualified service personnel under the following conditions.

a. When the power-supply cord or plug is damaged

b. If liquid has been spilled, or objects have fallen into the video product.

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions. Improper

adjustment of other controls may result in damage and will often require extensive work

by a qualified technician to restore the video product to its normal operation.

e. If the video product has been dropped or the cabinet has been damaged.

f. When the video product exhibits a distinct change in performance - this indicates a

need for service.

19 Replacement Parts -- When replacement parts are required, have the service

technician verify that the replacements he uses have the same safety characteristics as

the original parts. Use of replacements specified by the video product manufacturer can

prevent fire, electric shock or other hazards.

20 Safety Check -- Upon completion of any service or repairs to this video product, ask

the service technician to perform safety checks recommended by the manufacturer to

determine that the video product is in safe operating condition.

IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER

1. Save these instructions -- This page contains important safety and operating

instructions for AC Adapter/Charger Model VM-AC82A(R).

2. Before using AC Adapter/Charger, read all instructions and cautionary markings on

(1) AC Adapter/Charger, (2) battery and (3) product using battery.

3. Also read all instructions on pages 4 and 5.

4. Caution -- To reduce risk of injury, charge only rechargeable battery, VM-BP82(G), VM-

BP82 or VM-BP83.

Other types of batteries may burst causing personal injury and damage.

5. Do not expose charger to rain or snow.

6. Use of an attachment nor recommended or sold by the battery charger manufacturer

may result in a risk of fire, electric shock, or injury to persons.

7. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when

disconnecting charger.

8. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise

subjected to damage or stress.

9. Do not operate charger with damaged cord or plug - replace them immediately.

10. An extension cord should not be used unless absolutely necessary.

Use of improper extension cord could result in a risk of fire and electric shock. If

extension cord must be used, make sure:

A. The pins on plug of extension cord are the same number, size, and shape as those

of plug on charger.

B. That extension cord is properly wired and in good electrical condition; and

C. That wire size should be met below:

Minimum

AWG size Length of extension cord (feet)

18 Equal to or less than 100

16 Equal to or less than 150

11. Do not operate charger if it has received a sharp blow, been dropped, or otherwise

damaged in any way; take it to a qualified serviceman.

12. Do not disassemble charger: take it to a qualified serviceman when service or repair

is required. Incorrect reassembly may result in a risk of electric shock or fire.

13. To reduce risk of electric shock, unplug charger from outlet before attempting any

maintenance or cleaning.

"Note to CATV system installer: This reminder is provided to call the CATV system

installer's attention to Article 820-40 of the NEC that provides guidelines for proper

grounding and, in particular, specifies that the cable ground shall be connected to the

grounding system of the building, as close to the point of cable entry as practical".

IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER

NOTES:

• This unit uses video format cassettes.

• It records and plays back in the SP mode (14.3 mm/sec.).

• It cannot record and play back in the LP mode (7.2 mm/sec.).

• This camera/recorder uses a Hi-Fi stereo sound system. When a tape recorded by this

camera/recorder is played by a conventional 8mm camera/recorder, monaural sound is

output. When a tape recorded by a conventional 8mm camera/recorder is played by this

machine, monaural sound is output.

Features

•

• Easy to use

• 16x zoom ratio

• Instant zoom

• Multi-function TV/Cam remote control

• Image stabilization

IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER

Components and Accessories

Check that you have the following components and accessories before preceding.

1. AV stereo output cord with S-VIDEO plug

2. Battery pack

3. AC adapter/charger

4. Remote control battery

5. Shoulder Strap

6. External power adapter

7. Remote control

Getting Started

This section guides you through the initial preparation of the camera/recorder. None of

these processes are complex. Set aside some time, relax, and familiarize yourself with

this quality instrument.

Enjoy getting to know all about your Hitachi 8mm camera/recorder. The more

comfortable and familiar you are with the machine and its features, the more you can

make it do for you. Let's get started!

It is crucial that you read and understand all the safety instructions before you begin. If

you haven't read the safety instructions yet, please take the time to do so now.

Charging the Battery

The first step is to set the battery to charge. It takes approximately an hour, enough time

to familiarize yourself with some of the basic features of the camera/recorder. Once

charged the battery will give you approximately 55 ~ 65 minutes of operating time

depending on the use of ZOOM and Start/Stop.

Charge the battery at a temperature range of 50°F(10°C) - 86°F (30°C) to prevent

damage to the battery.

1. Plug the AC adapter/charger power cord into an AC outlet. Make sure that the wide

blade fits into the wide slot. If it doesn't fit try reversing it. If you still cannot make fit the

blades fully into the outlet either contact an electrician to replace your obsolete outlet, or

use a polarized cord or outlet accessory.

2. To insert the battery into the charger align the reference arrow on the battery with the

reference arrow on the AC adapter/charger. Push the battery till it is flush with the AC

adapter/charger sliding it in the direction of the arrow as shown in the figure.

3. The CHARGE light remains on while the battery charges, turning off when charging

completes.

Note: Remove the external power adapter from the AC adapter/charger before attempting

to charge the battery. The CHARGE light flashes if the external power adapter remains

connected while you attempt to charge the battery.

Note: Do not operate the battery at temperature below 14°F (-10°C) or above 95°F (35°C).

At extremely low temperatures operation time decreases, while at high temperature the

battery may be damaged.

After charging set the mark switch to red so that you may quickly identify

Getting Started

whether the battery is charged or uncharged.

Note: The marker switch is not concerned with the battery's performance.

Additional Information

To use a battery in optimum condition:

• Use the battery until the low charge light ( ) flashes. Using a battery for a short time

and then recharging it may shorten the operation time.

• It is recommended to refresh an battery before recharging it when it has not been used

for long time; otherwise its operation time becomes short. Press the refresh button.

After refreshing is complete, the REFRESH light turns off and the CHARGE light turns

on and charging begins automatically.

Refreshing a fully charged battery takes approximately 4 hours, adding considerable

time to battery charging.

With repeated normal charging and use the battery will gradually lose operating time.

When operation time becomes too short to be useful, replace the battery.

If the POWER light begins to flash during charging, remove the battery and then

reattach it to the AC charger/adapter. If the POWER light continues to flash after several

attempts to attach it, the battery is unable to take a charge and must be replaced.

Do not attach a hot battery to the AC adapter/charger. Allow it to cool. Attaching a hot

battery to the AC adapter/charger causes the POWER light to flash.

THERE ARE NO USER-SERVICEABLE PARTS INSIDE THE BATTERY OR AC

ADAPTER/CHARGER.

THROWING THE BATTERY INTO FIRE OR EXPOSING IT TO EXCESSIVE HEAT

(ABOVE 149°F (65°C)) MAY CAUSE INJURY.

SHORTING THE BATTERY'S TERMINAL INCREASES RISK OF FIRE OR

ELECTRICAL SHOCK.

Getting Started

ATTENTION:

The product that you have purchased contains a rechargeable battery. The battery is

recyclable. At the end of its useful life, under various state and local laws, it may be illegal

to dispose of this battery into the municipal waste stream. Check with your local solid waste

officials for details in your area for recycling options or proper disposal.

Getting Started

Adjusting the Electronic Viewfinder

The electronic viewfinder adjusts simply by pivoting it to a position where it is

comfortable and easy to see through. Place the viewfinder back in its original position

before storing the camera/recorder in its case or carrying the camera recorder around to

avoid damaging the viewfinder or camera/recorder.

Eyepiece Adjustment

To use the electronic viewfinder, pull out the eye cup all the way when using it and

adjust the diopter control so that the subject is seen most clearly in the viewfinder.

Always push in the eye cup after use.

Attaching the Shoulder Strap

Thread the ends of the provided shoulder strap through the slots at the back of the

camera/recorder and thread through the shoulder straps' buckles. Please ensure that

the straps are securely fastened before using the shoulder strap to carry the

camera/recorder.

Getting Started

Attaching the Optional Wide or Tele Converter Lens

1. To remove the lens hood, turn it counterclockwise.

2. Remove both caps of the converter lens.

3. Screw the lens into the threads on the camera/recorder lens assembly.

Loading Batteries

Install the remote control battery now to prevent misplacing it.

Remote Control Battery

1. Push the tab to the right of the remote control and hold it, then remove the battery

holder.

2. Press the PLAY button and hold it for about two seconds.

3. Insert the battery with the + facing in the direction of the open side of the battery

holder.

4. Replace the battery holder with battery in the remote control making sure that it is full

inserted.

WARNING: KEEP THE BATTERY AWAY FROM CHILDREN AND PETS.

IF SWALLOWED CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY

TREATMENT.

Note: Replace remote control battery with 3V micro lithium cells such as Maxell CR2025 or

its equivalent.

Note: Dispose of battery safely in accordance with local laws. Do not dispose of in fire.

Page is loading ...

Hitachi VM-H57A User manual

This manual is also suitable for

Hitachi VM-H57A User manual

Related papers

Other documents