ESAB PSE-5 PORTABLE ELECTRODE STORAGE Quick start guide

ESAB
Brand
ESAB
Model
PSE-5 PORTABLE ELECTRODE STORAGE
Type
Quick start guide
PSE-5 PORTABLE ELECTRODE STORAGE
0700 100 145 SINGLE PHASE 230V AC 50/60Hz
0700 100 146 SINGLE PHASE 110V AC 50/60Hz
0700 100 147 SINGLE PHASE 24V AC 50/60Hz
PORTABLE WELDING ELECTRODE DRY STORAGE
USAGE PURPOSE
This product is designed to drying, store and carrying welding electrodes at a certain temperature. Hot
welding electrodes can be used for the period recommended by the manufacturers, depending on the
conditions. It should only be used in the intended use direction to avoid possible damage to property
and injuries.
BEFORE USING
Make sure that the technical specification on the product corresponds to the electrical supply in your
network. Check the voltage and frequency information.
USAGE ENVIRONMENT
Flammable and explosive materials should not be around the device. The device it should not be
covered. It should be run in a dry place. Never use it in the rain and wet ground.
USING
Connect the appliance plug to the power supply by attaching a socket. Set the desired temperature
using a thermostat if it have. If there is no thermostat, the device will automatically reach the preset
temperature. The indicator lamp on it will light until it reaches the temperature. The lamp has reached
the temperature when it goes out. Remove the welding electrodes from the package before putting
them in the tray. If you are not using the appliance, unplug it. Some surfaces may be hot to the touch,
use heat resistant fireproof gloves. Do not touch live parts with electrical shock hazard.
PSE-5 Technical Information
Capacity
5 kg (11 lb)
Voltage
230V AC - 110V AC - 24V AC at 50/60 Hz
Power
200 W
Temperature
130 °C (260 °F) preset
Storage Size dia/dept
8 cm dia/ 50 cm, 3,14 in/19,68 in
Outer Dimensions
14 cm dia/ 54 cm, 5,51 in/21,25 in
Weight
5 kg (11 lb)
ESAB Group (UK) Ltd, 322 High Holborn, 6th Floor, London,WC1V 7PB,United Kingdom www.esab.com
SCHEMATIC DIAGRAM OF PSE-5
SPARE PARTS LIST
QTY
ORDERING NO
DESCRIPTION
NOTES
1
0700 100 112
Heating Element
230V
1
0700 100 113
Heating Element
110V
1
0700 100 114
Heating Element
24V
1
0700 100 151
Puller Tray
5 KG
1
0700 100 152
Bottom Cover
1
0700 100 153
Top Cover
1
0700 100 118
Power Cord
230V with plug
1
0700 100 119
Power Cord
110V with plug
1
0700 100 120
Power Cord
24V with plug
1
0700 100 121
Cable Gland
1
0700 100 122
Fuse Holder
1
0700 100 141
Fuse (glass)
5A
1
0700 100 124
Pilot Lamp
230V
1
0700 100 125
Pilot Lamp
110V
1
0700 100 126
Pilot Lamp
24V
  • Page 1 1
  • Page 2 2

ESAB PSE-5 PORTABLE ELECTRODE STORAGE Quick start guide

ESAB
Brand
ESAB
Model
PSE-5 PORTABLE ELECTRODE STORAGE
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents