Miele G 5225 Datasheet

TECHNICAL INFORMATION

G 5xxx Futura Dishwashers

(All US Models)

Technical Information

2

G 5xxx

Table of Contents

A Warning and Safety Instructions ........................................................................... 10

1 General Information ............................................................................................ 10

2 Touch Current Measurement .............................................................................. 10

3 Risk of Injury Due to Sharp Edges and Protruding Parts .................................... 11

4 Uninstalling the Dishwasher ............................................................................... 11

5 Service Work – Casing ....................................................................................... 11

6  Installation Aids Containing Silicone ................................................................... 11

B Modification History ............................................................................................... 12

C Technical Data ........................................................................................................ 13

1 Data Sheets ........................................................................................................ 13

1.1 Futura Classic ........................................................................................ 13

1.2  Futura Crystal ......................................................................................... 14

1.3 Futura Diamond ...................................................................................... 15

1.4 Futura Dimension ................................................................................... 16

1.5 Futura Dimension Plus ........................................................................... 17

2 Door Springs ....................................................................................................... 18

2.1 Summary ................................................................................................ 18

2.2 Standard Door Springs by Appliance Model ........................................... 18

3 Electrical and Plumbing Connections ................................................................. 18

3.1 Electrical Information .............................................................................. 18

3.2 Hard-Wired Electrical Connection .......................................................... 18

3.3 Plumbing Connections ............................................................................ 19

3.3.1 Intake Connection ........................................................................................ 19

3.3.2 Drain Connection ......................................................................................... 19

D Layout of Electrical Components .......................................................................... 19

1 Control Panels .................................................................................................... 19

1.1 Touchtronic ............................................................................................. 19

1.2 Incognito ................................................................................................. 20

1.3 Navitronic ............................................................................................... 20

2 Appliance Overviews .......................................................................................... 21

2.1  Integrated Models ................................................................................... 21

2.2 Fully Integrated Models .......................................................................... 22

3 Component Layouts ............................................................................................ 23

3.1 G 4205, G 45x0 (Classic, Slimline Dimension with Touchtronic, without

Display) .................................................................................................. 23



3.2 G 5105, G 5225 (Crystal with Touchtronic and Display) ......................... 24

3.3  G 5505, G 5605, G 5705 (Dimension/Dimension Plus with Touchtronic

and Display) ........................................................................................... 25



3.4 G 427x, G 428x, G 4570, G 5175, G 5285 (Classic, Dimension, Crystal

w/Incognito) ............................................................................................ 26



3.5 G 557x, G 567x (Dimension with Incognito) ........................................... 27

3.6 G 5775 (Dimension Plus with Incognito) ................................................. 28

3.7 G 5975 (Diamond with Incognito) ........................................................... 29

3.8 G 5915 (Diamond with Navitronic) .......................................................... 30

4 Data Tag ............................................................................................................. 31

5 Model Numbering ............................................................................................... 31

Technical Information

3

G 5xxx

010 Casing ...................................................................................................................... 32

2 Function .............................................................................................................. 33

2.1 BrilliantLight (Select Models) .................................................................. 33

4 Service ................................................................................................................ 33

4.1 Side Panel Removal ............................................................................... 33

4.2 Drip Pan Removal .................................................................................. 34

4.3 Hinge Removal ....................................................................................... 35

4.4 BrilliantLight Deactivation ....................................................................... 36

4.5 BrilliantLight Activation ........................................................................... 37

4.6 BrilliantLight Assembly Removal ............................................................ 37

020 Door ......................................................................................................................... 39

2.1 Door Handle and Door Lock (Touchtronic/Navitronic) ............................ 40

2.2  Door Lock (Incognito) ............................................................................. 40

2.3 Child Safety Lock ................................................................................... 40

2.4 Automatic Door Lock Latch (“Drying Plus” Function) .............................. 40

2.5 Combination Dispenser .......................................................................... 48

3 Fault Repair ........................................................................................................ 49

3.1 Door Can’t Be Closed ............................................................................. 49

3.2 Fault with Automatic Door Lock Latch .................................................... 50

4 Service ................................................................................................................ 50

4.1 Removing the Combination Dispenser ................................................... 50

4.2 Cable Holder Removal ........................................................................... 51

4.3 Locking Plate Adjustment/Replacement ................................................. 51

4.4 Bottom Door Seal Removal .................................................................... 52

4.5  Door Lock with Contact Switch Removal ................................................ 53

4.5.1 Fully Integrated Models ................................................................................ 53

4.5.2 Integrated Models ........................................................................................ 53

4.6 Activating the Door Lock Emergency Release (Fully Integrated Models)54

4.7 Automatic Door Opener and Drive Removal .......................................... 55

030 Front Panel .............................................................................................................. 58

4 Service ................................................................................................................ 59

4.1  Custom Door Panel (GDU) Removal ...................................................... 59

4.2  Door Tension Adjustment ....................................................................... 59

4.3 Door Outer Panel Removal .................................................................... 60

4.4 Lower Access Cover Plate Removal ...................................................... 61

4.5 Connecting Strip Removal ...................................................................... 61

4.6  Terminal Block Removal ......................................................................... 61

040 Inner Cabinet ........................................................................................................... 64

2 Function .............................................................................................................. 65

2.1 Cabinet Construction .............................................................................. 65

2.2 Drying System ........................................................................................ 65

2.3 Fan ......................................................................................................... 66

3 Fault Repair ........................................................................................................ 67

3.1 Condensation Forms on Adjacent Cabinets ........................................... 67

3.2 Noises during Drying Cycle .................................................................... 67

4 Service ................................................................................................................ 68

4.1 Door Seal Replacement ......................................................................... 68

4.2 Basket Guide Removal ........................................................................... 68

4.3 Multi-Plinth Removal ............................................................................... 69

Technical Information

4

G 5xxx

4.4 Steam Condenser Removal ................................................................... 70

4.5 Fan Removal .......................................................................................... 70

4.6 Connection Box Removal (Select Models) ............................................. 71

4.7 BrilliantLight Control Module Removal .................................................... 72

050 Water Paths ............................................................................................................. 73

2 Function .............................................................................................................. 74

2.1 Water Circulation .................................................................................... 74

2.2 WaterProof System (WPS) ..................................................................... 75

2.3 WaterProof System Flow Rate Restrictor ............................................... 75

2.4 View from Underside of Base ................................................................. 76

2.5 Water Diverter ........................................................................................ 76

2.5.1 Water Diverter without EGS ......................................................................... 78

2.5.2 Water Diverter with EGS .............................................................................. 79

2.5.3 Reactivation ................................................................................................. 80

2.6 Water Softener Programming ................................................................. 81

2.7 Flow Meter B3/4, Water Intake Quantity ................................................. 81

2.8 Electronically Controlled Water Hardness (EGS) ................................... 81

2.9 MPEH Circulation Pump (No Slide Shutter or Frequency Converter) ..... 81

2.10 MPEW Circulation Pump (with Slide Shutter, No Frequency Converter) 82

2.11 MPPW Circulation Pump (with Frequency Converter & Slide Shutter) ... 83

2.12 Heater Element ...................................................................................... 85

2.13 Heater Pressure Switch, B1/13 .............................................................. 85

2.14 NTC Temperature Sensor R30 ............................................................... 86

2.15 Turbidity Sensor (ECO Sensor III, Autosensor), B3/10 ........................... 87

2.16 Spray Arms ............................................................................................. 89

2.17 Spray Arm Sensing, Middle and Bottom Spray Arms ............................. 89

2.18 Filter Combination with Microfine Filter ................................................... 90

2.19 Drain Pump ............................................................................................ 91

3 Fault Repair ........................................................................................................ 92

3.1 Jammed Circulation Pump ..................................................................... 92

3.2 Drain Pump Switches On and Off at Short Intervals ............................... 92

3.3 Intake/Drain LED Flashes and Lights up Alternately (Incognito) ............ 92

3.4 Foreign Object in Drain System .............................................................. 93

4 Service ................................................................................................................ 94

4.1 Removing the Top Spray Arm ................................................................ 94

4.2 Removing the Middle Spray Arm ............................................................ 94

4.3 Removing the Bottom Spray Arm ........................................................... 94

4.4 Removing the Top Spray Arm Feed Pipe with Turbidity Sensor ............. 94

4.5 Removing the Middle Spray Arm Feed Pipe ........................................... 94

4.6 Replacing the Spray Arm Sensor ........................................................... 95

4.7 Flow Meter (Circuit Board) Removal ....................................................... 96

4.8 Removing EGS Valve Y5 ....................................................................... 97

4.9 Removing Reactivation Valve Y38 ......................................................... 97

4.10 Heater Relay Removal ........................................................................... 97

4.11 Salt Container and Salt Container Reed Switch Removal ...................... 97

4.12 Water Diverter Removal ......................................................................... 98

4.13 Circulation Pump Removal ................................................................... 100

4.14 Removing the Circulation Pump Housing Cap with Ring Heater .......... 101

4.15 MPEH/MPEW Pump Capacitor Removal ............................................. 102

Technical Information

5

G 5xxx

4.16 Removing the Heater Pressure Switch ................................................. 102

4.17  Removing the Drain Pump ................................................................... 102

4.18 Removing the Float .............................................................................. 103

4.19 Removing the Float Switch ................................................................... 103

4.20 Removing the NTC Temperature Sensor ............................................. 104

4.21 Non-Return Valve Removal .................................................................. 104

4.22 Removing the Sump ............................................................................. 104

4.23 Filter Combination Disassembly ........................................................... 105

4.24 Filter Combination Assembly (New Microfine Filter and Handle) .......... 106

4.25 Filter Combination Assembly (with Locking Piece) ............................... 108

4.26 Replacing the WaterProof System Restrictor ....................................... 109

4.27 WaterProof System (WPS) Removal .................................................... 111

4.28 Filling the Salt Container in the Sump .................................................. 111

4.29 Water Level Check ............................................................................... 112

080 Electronic .............................................................................................................. 113

2 Function ............................................................................................................ 114

2.1 General Operation ................................................................................ 114

2.1.1 Touchtronic/Navitronic Controls ................................................................. 114

2.1.2 Incognito Controls ...................................................................................... 115

2.2 Component Test ................................................................................... 115

2.2.1 Test Sequence and Background Information ............................................. 115

2.3 Machine Response Following a Power Failure ..................................... 118

2.4 Turbo Function (Select Models) ........................................................... 118

2.5 SensorDry Feature ............................................................................... 119

2.6 Drying Plus Function ............................................................................ 120

2.7 “Normal” Program ................................................................................. 120

2.8 “Extra Quiet” Program (MPPW Only) .................................................... 120

2.9 “Intensive Lower Basket” Option .......................................................... 121

2.10 Demo Mode .......................................................................................... 122

2.11 Electronics ID Summary ....................................................................... 123

2.12 Programming of Language and Time of Day at First Commissioning

(Models with Display Only) ................................................................... 123



3 Fault Repair ...................................................................................................... 123

3.1 Main Switch Is On, No Message in Display .......................................... 123

3.2  Rinse Aid Used Up Too Quickly (Models with SensorDry) ................... 123

3.3 Program Can Be Selected but Not Started ........................................... 124

3.4 Program Interrupted, No Fault Indication .............................................. 124

3.5 Diagnostic Support Cannot Establish a Connection ............................. 125

3.6 Settings Selected During Initial Commissioning Are Not Saved ........... 125

3.7 Standby Mode Not Functioning ............................................................ 125

3.8 Fault Code Summary ............................................................................ 126

3.9 Fault Code F01: Water/Heating NTC or Leads Short-Circuited ............ 127

3.10 Fault Code F02: Water/Heating NTC or Leads Open-Circuited ............ 127

3.11 Fault Code F11: Drainage Fault ........................................................... 127

3.12 Fault Code F12: Water Intake Fault at Start of Step ............................. 129

3.13 Fault Code F13: Water Intake Fault at End of Step .............................. 131

3.14 Fault Code F14: Water Intake Fault: Heater Pressure Switch .............. 133

3.15 Fault Code F15: Water Intake Fault - Hot Water .................................. 135

3.16 Fault Code F18: Flow Meter Stationary State Monitor B3/4 ................. 135

Technical Information

6

G 5xxx

3.17 Fault Code F19: Flow Meter B3/4 Stiff and Not Turning Freely ............ 135

3.18 Fault Code F24: Heater Relay Contact ................................................. 137

3.19 Fault Code F25: Target Temperature Fault .......................................... 138

3.20 Fault Code F26: Boiling Protection ....................................................... 139

3.21 Fault Code F32: Door Lock Does Not Close ........................................ 139

3.22 Fault Code F33: Door Lock Does Not Open ......................................... 139

3.23 Fault Code F36: Door Lock Switch Defective ....................................... 140

3.24 Fault Code F40: Electronic Fault .......................................................... 140

3.25 Fault Code F42: Line Frequency Registration Fault ............................. 140

3.26 Fault Code F47: Faulty Interface Between Selection-Display Electronic

(BAE) & Control-Power Electronic (SLT) .............................................. 141



3.27 Fault Code F51: Heater Pressure Switch ............................................. 141

3.28 Fault Code F52: Heater Pressure Switch Has Reset During Heating ... 143

3.29 Fault Code F63: Slide Shutter Fault ..................................................... 143

3.30 Fault Code F67: Circulation Pump Speed Too Low ............................. 144

3.31 Fault Code F68: Circulation Pump Operating After Shutoff .................. 144

3.32 Fault Code F69: Circulation Pump Blocked .......................................... 145

3.33 Fault Code F70: Float Switch Fault ...................................................... 145

3.34 Fault Code F78: Circulation Pump Fault ............................................... 146

3.35 Fault Code F79: Circulation Pump Interaction Fault ............................. 147

3.36 Fault Code F84: Slide Shutter Positioning Fault ................................... 147

3.37 Fault Code F85: Slide Shutter Signal Change Fault ............................. 148

3.38 Fault Code F86: Salt Container Lid Contact Fault ................................ 148

3.39 Fault Code F88: Turbidity Sensor Fault ................................................ 149

3.40 Fault Code F91: Load Size Registration Inactive ................................. 149

4 Service .............................................................................................................. 150

4.1 Programming Mode .............................................................................. 150

4.2 Service Mode ....................................................................................... 150

100 Fascia Panel .......................................................................................................... 151

3 Fault Repair ...................................................................................................... 152

3.1 On/Off Button Jams .............................................................................. 152

3.2  Display Steams Up ............................................................................... 152

4 Service .............................................................................................................. 152

4.1 Fascia Panel Removal (Touchtronic/Navitronic) ................................... 152

4.2 Fascia Panel Removal (Incognito) ........................................................ 153

4.3 Control Panel Removal (Touchtronic/Novotronic) ................................ 154

4.4 On/Off Switch Removal (Touchtronic/Novotronic) ................................ 154

4.5 Electronic Removal (Incognito) ............................................................. 155

4.6 Electronic Removal (Touchtronic/Novotronic) ...................................... 156

300 Technical Service Bulletins ................................................................................. 157

1 Miele Policy on Dishwasher Detergent Requirements ...................................... 157

2  Dishwasher Detergents and Phosphates .......................................................... 157

3  G 5000 Inlet Hoses; Update ............................................................................. 158

4  G 5775 Fascia Panel Mounting......................................................................... 159

Technical Information

7

G 5xxx

List of Figures

Figure D-1: Touchtronic Fascia Panel (G 5505/G 5705 Shown) ................................................... 19

Figure D-2: Incognito Fascia Panel (G 427x/G 4570/G 5175 Shown) .......................................... 20

Figure D-3: Navitronic Fascia Panel (G 5915 Shown) .................................................................. 20

Figure D-4: Integrated Model ......................................................................................................... 21

Figure D-5: Fully Integrated Model ................................................................................................ 22

Figure D-6: G 4205/G 45x0 Component Layout ............................................................................ 23

Figure D-7: G 5105, G 5225 Component Layout .......................................................................... 24

Figure D-8: G 5505, G 5605, G 5705 Component Layout ............................................................ 25

Figure D-9: G 427x, G 428x, G 4570, G 5175, G 5285 Component Layout ................................. 26

Figure D-10: G 557x, G 567x Component Layout ......................................................................... 27

Figure D-11: G 5775 Component Layout ...................................................................................... 28

Figure D-12: G 5975 Component Layout ...................................................................................... 29

Figure D-13: G 5915 Component Layout ...................................................................................... 30

Figure D-14: Data Tag Location .................................................................................................... 31

Figure D-15: Data Tag Information ................................................................................................ 31

Figure D-16: Model Numbering ..................................................................................................... 31

Figure 010-1: Side Panel Removal ................................................................................................ 34

Figure 010-2: Drip Pan Removal ................................................................................................... 35

Figure 010-3: Opening the Hinge Bracket ..................................................................................... 35

Figure 010-4: Front Hinge Retaining Screw .................................................................................. 36

Figure 010-5: Side Hinge Retaining Screw ................................................................................... 36

Figure 010-6: BrilliantLight Circuit Board and Plug ....................................................................... 37

Figure 010-7: BrilliantLight Lens .................................................................................................... 38

Figure 020-1: Door Handle Release .............................................................................................. 40

Figure 020-2: Child Safety Lock .................................................................................................... 40

Figure 020-3: Drying Plus (before Program End) .......................................................................... 41

Figure 020-4: Drying Plus (after Program End) ............................................................................. 42

Figure 020-5: Door Lock Latch Plugs ............................................................................................ 42

Figure 020-6: Door Lock Latch, Position 1 .................................................................................... 43

Figure 020-7: Door Lock Latch, Position 2 .................................................................................... 44

Figure 020-8: Door Lock Latch, Position 3 .................................................................................... 45

Figure 020-9: Door Lock Latch, Intermediate Opening Position ................................................... 46

Figure 020-10: Door Lock Latch, Intermediate Closing Position ................................................... 47

Figure 020-11: Door Lock Latch Assembly (Mechanical Version) ................................................ 48

Figure 020-12: Combination Dispenser ......................................................................................... 48

Figure 020-13: Combination Dispenser Removal ......................................................................... 51

Figure 020-14: Door Seal with Door .............................................................................................. 52

Figure 020-15: Bottom Door Seal .................................................................................................. 53

Figure 020-16: Door Lock Removal (Integrated Models) .............................................................. 54

Figure 020-17: Door Lock Emergency Release ............................................................................ 55

Figure 020-18: Automatic Door Opener, Viewed from Underside ................................................. 56

Figure 020-19: Drive ...................................................................................................................... 57

Figure 030-1: Integrated Door Panel Screw Locations ................................................................. 59

Figure 030-2: Door Tension Adjustment ....................................................................................... 59

Figure 030-3: Outer Door Panel Removal ..................................................................................... 60

Figure 030-4: Lower Access Cover Plate and Connecting Strip Removal .................................... 61

Figure 030-5: Terminal Block Cover .............................................................................................. 62

Figure 030-6: Terminal Block Screws............................................................................................ 62

Figure 030-7: Interference Suppression Capacitor and Ground Wire ........................................... 63

Figure 040-1: Recirculation Turbothermic Drying .......................................................................... 65

Technical Information

8

G 5xxx

Figure 040-2: Condenser Pocket ................................................................................................... 67

Figure 040-3: Seal Install Guide .................................................................................................... 68

Figure 040-4: Basket Guide ........................................................................................................... 69

Figure 040-5: Clip with Bolt ........................................................................................................... 69

Figure 040-6: Fan/Condenser Removal ........................................................................................ 71

Figure 040-7: Connection Box ....................................................................................................... 71

Figure 040-8: BrilliantLight Control Module ................................................................................... 72

Figure 050-1: Water Paths - Diagram ........................................................................................... 74

Figure 050-2: Flow Rate Restrictor ................................................................................................ 75

Figure 050-3: View from Underside of Base ................................................................................. 76

Figure 050-4: Water Diverter ......................................................................................................... 77

Figure 050-5: Water Diverter without EGS .................................................................................... 78

Figure 050-6: Water Diverter with EGS ......................................................................................... 79

Figure 050-7: Reactivation ............................................................................................................ 80

Figure 050-8: MPEH Circulation Pump ......................................................................................... 82

Figure 050-9: MPEW Circulation Pump ........................................................................................ 83

Figure 050-10: MPPW Circulation Pump ...................................................................................... 84

Figure 050-11: MPPW Circulation Pump Voltages ....................................................................... 85

Figure 050-12: Heater Pressure Switch ........................................................................................ 86

Figure 050-13: Turbidity Sensor Circuit ......................................................................................... 88

Figure 050-14: Turbidity Sensor Location ..................................................................................... 88

Figure 050-15: Middle and Bottom Spray Arm Sensors ................................................................ 90

Figure 050-16: Filter Combination in Sump ................................................................................... 91

Figure 050-17: Microfine Filter Trap .............................................................................................. 93

Figure 050-18: Spray Arm Sensor ................................................................................................. 96

Figure 050-19: Screws and Clips Securing the Pump Housing Cap (MPPW) ............................ 101

Figure 050-20: Removing the Drain Pump .................................................................................. 103

Figure 050-21: Combination Filter ............................................................................................... 106

Figure 050-22: Microfine Filter Installation .................................................................................. 107

Figure 050-23: Filter Combination Lock/Unlock Positions .......................................................... 107

Figure 050-24: Combination Filter Locking Clip (Unlocked) ........................................................ 108

Figure 050-25: Combination Filter Locking Clip (Locked) ........................................................... 109

Figure 050-26: WaterProof System ............................................................................................. 110

Figure 050-27: Removing the WaterProof System Restrictor ..................................................... 110

Figure 050-28: Replacing the WaterProof System Restrictor ..................................................... 111

Figure 050-29: Filling the Salt Container in the Sump................................................................. 112

Figure 050-30: Water Level Reference ....................................................................................... 112

Figure 080-1: Touchtronic/Navitronic Main Menu ....................................................................... 114

Figure 080-2: Selected Program Display .................................................................................... 114

Figure 080-3: Selected Options ................................................................................................... 114

Figure 080-4: Incognito Main Menu ............................................................................................. 115

Figure 080-5: Selected Program Display .................................................................................... 115

Figure 080-6: Circuit Test Path for F11 ....................................................................................... 128

Figure 080-7: F19 Start Rinse Block Water Intake ...................................................................... 136

Figure 080-8: F19 Test Routine ................................................................................................... 136

Figure 080-9: Circuit Test Path for F24 ....................................................................................... 137

Figure 080-10: Circuit Test Path for F51 (Initial State) ................................................................ 141

Figure 080-11: Circuit Test Path for F51 (Testing State) ............................................................ 142

Figure 100-1: Screws Securing the Fascia Panel (Touchtronic/Navitronic) ................................ 153

Figure 100-2: Fascia Panel Removal (Incognito) ........................................................................ 154

Figure 100-3: On/Off Switch Removal (Touchtronic/Novotronic) ................................................ 155

Technical Information

9

G 5xxx

List of Tables

Table C-1: US Data Sheet, Futura Classic Models ....................................................................... 13

Table C-2: US Data Sheet, Futura Crystal Models ....................................................................... 14

Table C-3: US Data Sheet, Futura Diamond Models .................................................................... 15

Table C-4: US Data Sheet, Futura Dimension Models .................................................................. 16

Table C-5: US Data Sheet, Futura Dimension Plus Models ......................................................... 17

Table C-6: Door Springs Summary ............................................................................................... 18

Table C-7: Standard Door Springs by Model ................................................................................ 18

Table 050-1: MPPW Pump Pressure versus Wash Program ....................................................... 84

Table 050-2: Temperature Sensor R30 Resistance Values .......................................................... 87

Table 050-3: Spray Arm Speeds ................................................................................................... 89

Table 080-1: “Normal” Program ................................................................................................... 120

Table 080-2: “Extra Quiet” Program ............................................................................................ 121

Table 080-3: Programs with “Intensive Lower Basket” Option .................................................... 121

Table 080-4: Circulation Pump Function With and Without “Intensive Lower Basket” ................ 122

Table 080-5: Electronics ID Summary ......................................................................................... 123

Table 080-6: Fault Code Summary ............................................................................................. 126

Technical Information

10

G 5xxx

A Warning and Safety Instructions

1 General Information

Danger!

 The low voltage produced in the electronic is not fully electrically isolated

from the power supply. If power supply connection is via a reversible plug,

and if this is reversed, then the live (phase) voltage is not applied to

terminal [1] or [L] at the terminal block. If a plug contact is then

disconnected, e.g., from the NTC temperature sensor, supply voltage is

applied to these plug contacts.

Note:

 Before starting any service work, disconnect the machine from the power

supply. Service and repair work should only be carried out by qualified

persons in accordance with all appropriate local and national safety

regulations.

 When carrying out measurements on an electronic connected to the

power supply, always use narrow measuring probes. Contacts are very

closely spaced and using thicker probes may cause short circuits.

 For extra safety it is advisable to install a residual current device (RCD)

with a trip current of 30mA or less (in accordance with DIN VDE 0664,

VDE 0100 part 739). All regulations of the appropriate utility supply

companies and standards relating to safety (not limited to electrical

safety) are to be complied with. After any repair or service work, it is

essential that an electrical safety check is carried out in accordance with

DIN VDE 0701-1, part 1.

2 Touch Current Measurement

Note:

 Touch current measurement should be carried out on all accessible

conductive parts that are not connected to ground.

Warning!

 Touch current measurement should only be carried out after the ground

connection of the machine under test has been checked and found to be

satisfactory!

 Dangerous voltages may exist on defective machines as well as on

accessible conductive parts that are not connected to ground!

Note:

 Touch current measurement should be carried out on the following

accessible conductive parts: None.

Technical Information

11

G 5xxx

3 Risk of Injury Due to Sharp Edges and Protruding Parts

Danger!

 There may be a risk of injury due to protruding parts.

Protective goggles should be worn.

 There may be a risk of injury due to sharp edges. Protective gloves should

be worn and the edge protection (mat. no. 05057680) should be used.

4 Uninstalling the Dishwasher

Before the machine is removed from its installation niche, the appliance

feet must be screwed in (for positioning, refer to the installation plan).

If this is not done the feet could become damaged.

If the machine is installed on skids, adjusting the feet is not required.

5 Service Work – Casing

Warning!

 If it is necessary to tip the machine when working on its lower areas, it

may only be tilted onto its back.

 The appliance must not be tilted onto its left side as this would cause

brine to run out of the salt container.

 After work has been completed and the machine installed again, a short

program without load should be carried out. This is to remove any salt

residues that might be present and to prevent possible corrosion.

6 Installation Aids Containing Silicone

Warning!

Installation aids that contain silicone, e.g., silicone grease, are not suitable for

use in dishwashers because of the damage they can cause.

If, e.g., hoses or seals are treated with silicone in order to facilitate

installation, this could jam the circulation pump. Furthermore, ingredients in

silicone grease can evaporate and damage electrical components such as

heater relays.

Technical Information

12

G 5xxx

B Modification History

When? Who? What?

5/22/2015 Jessica Naples Minor changes throughout

3/23/2015 Jessica Naples Minor changes throughout

3/13/2015 Jessica Naples Minor changes throughout

5/16/2014 Jessica Naples

Added tech service bulletin; removed programming

and service modes (separate documents); updated

data sheets in Section C and component layouts in

Section D

2/13/2012 Jessica Naples Drain pump info and tech service bulletins added

9/15/2011 Jessica Naples Programming updated

6/10/2011 Jessica Naples Compilation for Website

Technical Information

13

G 5xxx

C Technical Data

1 Data Sheets

1.1 Futura Classic

Features Model

G 4205 G 4225 G 4270 G 4275 G 4281 G 4286

Width 24”

Height

Built-in 33.9” (adj.+ 2.4”)

32.3” (adj.

+ 2.4”)

33.9” (adj.+

2.4”)

31.7" (adj. +

2.6")

33.3" (adj.

+ 2.6")

Sensor technology AutoSensor

Sensor softener No

Spray arm sensing None

SensorDry No

Noise level 48dB 46dB 48dB 46dB

Heater rating 1300W

Circulation pump type MPEH (without slide shutter or frequency converter)

Electrical connection 120VAC; 1.5kW; 15A

Water (flow) pressure 4.4 - 145 psi (0.3 - 10 bar)

Hot-water connection Max. 140°F

Drain pump head height Max. 3'4”

Drain hose length Max. 13'1”

Salt container in door No

Drying system Circulation Turbothermic drying

Auto door lock latch No

Power cord length Approx. 5'6”

Capacity 13 place settings

1

16 place settings 13 place settings

2

Table C-1: US Data Sheet, Futura Classic Models

1

16 place settings with cutlery tray.

2

14 place settings with cutlery tray.

Technical Information

14

G 5xxx

1.2 Futura Crystal

Features Model

G 5105 G 5175 G 5225 G 5285

Width 24”

Height

Built-in 33.9” (adj.+ 2.4”)

33.3" (adj. + 2.6")

Sensor technology AutoSensor

Sensor softener No

Spray arm sensing None

SensorDry No

Noise level 48dB 46dB

Heater rating 1300W

Circulation pump type

MPEH (no slide shutter or

frequency converter)

MPEW (w/slide shutter, w/out

frequency converter)

Electrical connection 120VAC; 1.5kW; 15A

Water (flow) pressure 4.4 - 145 psi (0.3 - 10 bar)

Hot-water connection Up to max. 140°F

Drain pump head height Max. 3'4”

Drain hose length Max. 13'1”

Salt container in door No

Drying system Circulation Turbothermic drying

Auto door lock latch No

Connection cable length Approx. 5'6”

Capacity 16 place settings

Table C-2: US Data Sheet, Futura Crystal Models

Technical Information

15

G 5xxx

1.3 Futura Diamond

Features Model

G 5915 G 5975

Width 24”

Height

Built-in 33.9” (adj. + 2.4”) 33.9” (adj. + 2.6”)

Sensor technology AutoSensor

Sensor softener No

Spray arm sensing Middle and bottom

SensorDry Yes

Noise level 42dB

Heater rating 1300W

Circulation pump type MPPW (with frequency converter and slide shutter)

Electrical connection 120VAC; 1.5kW; 15A

Water (flow) pressure 4.4 - 145 psi

Hot-water connection Up to max. 140°F

Drain pump head height Max. 3'4”

Drain hose length Max. 13'1”

Salt container in door No

Drying system Circulation Turbothermic drying

BrilliantLight Yes

Auto door lock latch Yes (electrical)

Power cord length Approx. 5'6”

Capacity 16 place settings

Table C-3: US Data Sheet, Futura Diamond Models

Technical Information

16

G 5xxx

1.4 Futura Dimension

Features Model

G 45x0 G 5505 G 5570 G 5575 G 5605 G 567x

Width 18” 24”

Height

Built-in

32.3” (adj.

+ 2.4”)

33.9” (adj. +

2.4”)

32.3” (adj.

+ 2.6”)

33.9” (adj.

+ 2.6”)

33.9” (adj. + 2.6”)

Sensor technology AutoSensor

Sensor softener

No

Spray arm sensing None

SensorDry No Yes

Noise level 46dB 46dB 44dB

Heater rating 1300W

Circulation pump type MPEH

2

MPEW

1

MPPW

3

Electrical connection 120VAC; 1.5kW; 15A

Water (flow) pressure 4.4 - 145 psi (0.3 - 10 bar)

Hot-water connection Max. 140°F

Drain pump head height Max. 3'4”

Drain hose length Max. 13'1”

Salt container in door No

Drying system

Recirculation Turbothermic drying

Auto door lock latch

No

Power cord length Approx. 5'6”

Capacity

10 place

settings

16 place settings

Table C-4: US Data Sheet, Futura Dimension Models

1

Circulation pump with slide shutter, without frequency converter

2

Circulation pump without slide shutter or frequency converter

3

Circulation pump with slide shutter and frequency converter

Technical Information

17

G 5xxx

1.5 Futura Dimension Plus

Features Model

G 5705 G 5775

Width 24”

Height

Built-in 33.9” (adj. + 2.4”) 33.9” (adj. + 2.6”)

Sensor technology AutoSensor

Sensor softener No Yes

Spray arm sensing None

SensorDry Yes

Noise level 45dB

Heater rating 1300W

Circulation pump type MPPW (frequency converter & slide shutter)

Electrical connection 120VAC; 1.5kW; 15A

Water (flow) pressure 4.4 - 145 psi (0.3 - 10 bar)

Hot-water connection Max. 140°F

Drain pump head height Max. 3'4”

Drain hose length Max. 13'1”

Salt container in door No

Drying system Circulation Turbothermic drying

Auto door lock latch Yes (mechanical)

Power cord length Approx. 5'6”

Capacity 16 place settings

Table C-5: US Data Sheet, Futura Dimension Plus Models

Technical Information

18

G 5xxx

2 Door Springs

2.1 Summary

Springs are always installed in pairs of the same tensile strength.

Color Tensile strength (lbs (N)) Length (in. (mm))

Orange Approx. 52 (230) 5.90 (150)

Uncolored Approx. 72 (320) 6.14 (156)

Green Approx. 92 (410) 6.10 (155)

Table C-6: Door Springs Summary

2.2 Standard Door Springs by Appliance Model

Model Width Spring color

Max. front panel

weight [lbs (kg)]

G 45x0 18” Orange 15.4 (7)

G 42x0 24" Uncolored 20.9 (9.5)

G 42x5, G 5xx5 24” Green 28.6 (13)

G 5xx0 24” Uncolored

20.9 (9.5)

Table C-7: Standard Door Springs by Model

3 Electrical and Plumbing Connections

3.1 Electrical Information

The appliance is equipped with a 4-foot power cord and molded NEMA 515

plug for connection to a NEMA 5-15R receptacle (120VAC, 15-amp, 3-prong,

grounded outlet).

It is recommended that the power outlet for the appliance be installed on the

wall (within the cabinets), adjacent to under-counter space where the

appliance is installed.

Ensure that the cabinets contain no rough edges that could damage the

power cord or drain hose. If metal cabinets are used, ensure that a rubber

grommet is installed around the opening.

Always exercise caution when sliding the dishwasher in or out, to prevent

damaging the power cord and/or hoses.

3.2 Hard-Wired Electrical Connection

Connect L1 (black) to L on the terminal block, N (white) to N on the terminal

block, and GND to the ground connector.

Note:

Hardwiring the dishwasher should only be done if required by electrical code.

Technical Information

19

G 5xxx

Do not cut the plug off the power supply cord/plug and connect it directly to

the house wiring under any circumstances. This voids the warranty.

For hardwiring, the power cord must be removed from the appliance by

disconnecting the cord from the terminal block located at the lower left front of

the dishwasher, behind the toekick and service panel. Feed the permanent

power supply cable through the strain relief and secure it directly to the

terminal block.

Note:

The appliance must be grounded.

3.3 Plumbing Connections

3.3.1 Intake Connection

The appliance is supplied with a 5-foot-long intake hose, equipped with a ⅜-

inch female hose connection. This hose connection can be directly connected

to a water supply valve or to an appropriate coupler/adapter (not included

with appliance).

3.3.2 Drain Connection

The appliance is equipped with a 5-foot-long drain hose with an internal

diameter of ⅞“.

D Layout of Electrical Components

1 Control Panels

Miele Futura dishwashers are categorized into three (3) product series, based

on the type of controls.

1.1 Touchtronic

This series of Miele dishwashers is operated by pushing a single button – no

separate temperature or drying selections – just turn the machine on, select a

program and Miele does the rest. All models include a diverse group of wash

programs for multiple cleaning needs. Models are designed to maximize

cleaning results and optimize water and energy conservation.

Figure D-1: Touchtronic Fascia Panel (G 5505/G 5705 Shown)

Technical Information

20

G 5xxx

1.2 Incognito

The Incognito (fully integrated) series of dishwashers has the program

controls located on the top edge of the door, which can be accessed while

the door is open. Neither seen nor heard, the Miele Incognito Series OCI

(Optical Cycle Indicator) lets you see the progress of the dishwasher cycle via

a red light, which is steady or flashing depending on the status of the cycle.

Figure D-2: Incognito Fascia Panel (G 427x/G 4570/G 5175 Shown)

1.3 Navitronic

The Navitronic touch display consists of two electronic boards located behind

the control panel. The front program electronic board contains touchpad

sensors, which respond to finger contact. Three touchpad sensors are

present on each side of the display to control the menu items displayed next

to them (indicated by a small arrow) within the display area. During operation

the display will show:

 The program name

 The current time of day

 The program sequence

 The approximate remaining time

 Faults and messages

Figure D-3: Navitronic Fascia Panel (G 5915 Shown)

1 RemoteVision 5 Selection buttons

2 Selection buttons 6 i (information) button

3 On/off button 7 Standby display

4 C (clear) button 8 PC interface

Page is loading ...

Miele G 5225 Datasheet

Miele G 5225 Datasheet

Related papers

Other documents