TEAC AP-505 Silver Product information

Category
Musical Equipment
Type
Product information
TEAC CORPORATION, JAN. 2019
Rev. 0 JUL09, 18
Rev. 1 AUG29, 18
Rev. 2 DEC26, 18
Product Preliminary
Design and specification may vary without notice.
Rated Output Power: 115W+115W (
4 ohms, 1kHz, THD 0.8%
)
70W+70W (
8 ohms, 1kHz, THD 0.8%
)
BTL Output Power: 250W (4 ohms, Monaural)
200W (8 ohms, Monaural)
Compatible Speaker Impedance: 4 to 8 ohms
THD: 0.002%
(XLR IN 1V, 1kHz, 8 ohms, 12.5W JEITA)
S/N Ratio: 110 dB
(XLR IN 6V, 1kHz, 8 ohms, HIF-A)
Frequency Response: 10Hz to 50kHz
( 5dB, XLR IN 1V, 1kHz, 8 ohms, 1W JEITA)
Analog Inputs: RCA x 1 pair (Unbalanced)
XLR x 1 pair (Balanced)
Speaker Terminals: Screw type x 1 set
Operation Power: AC 120V, 60Hz
(US/Canada)
AC 230V, 50Hz (UK/Europe)
Power Consumption: 55 W
Dimensions
(W x H x D): 11.4” x 3.3” x 10.4
290 x 84.5 x 264 mm
Weight:
(TBA)
Hypex Ncore Power Amplifier tuned for TEAC
Balanced Circuit Design throughout Input section to Output
3 Output Modes
(Switchable)
Stereo mode
BTL mode
(Bridge mode)
Bi-Amp mode (Dual monaural)
Power Amplifier section with Protection Circuits for Current
Surge, Over-voltage, and Over-heating
VU Meters with AD/DA Circuits display Listening Level Volume
(with 4-step dimmable backlight)
Power Supply section with Schottky-barrier Diodes
Toroidal-core Power Transformer
Large-sized Screw-type Speaker Terminals
(Gold-plated)
Aluminium Cabinet (Front, Top, Sides)
3-position Patent-registered Pin-point Feet
Auto-power Saving
Cooling Fan-less design for Hi-Fi listening
Available in Black and Silver
Main Features General Specifications
AP-505
Stereo Power Amplifier
Silver
Black
Ncore power amplifier module
by Hypex
  • Page 1 1

TEAC AP-505 Silver Product information

Category
Musical Equipment
Type
Product information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI