2. Brookstone
  3. 437590

Brookstone 437590 User Giude

  • Hello! I am an AI chatbot trained to assist you with the Brookstone 437590 User Giude. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
437590 Tool Storage Shed
437590
Tool Storage Shed
Nashua, New Hampshire 03062
Customer Service 800-846-3000
www.brookstone.com
2
437590 Tool Storage Shed
Parts Identification
A. Left side panel
1 pc
B. Right side panel
1 pc
C. Base
1 pc
D. Right back panel
1 pc
E. Left back panel
1 pc
F. Left shelf panel
1 pc
G. Right shelf panel
1 pc
H. Top shelf
1 pc
I. Middle shelf
1 pc
J. Middle frame
1 pc
K. Top frame
1 pc
L. Bottom frame
1 pc
15
437590 Tool Storage Shed
3
4
5
6
N
J
O
STEP 11 :
11.1. Attach lock (4) to left door (N) with lock screws (3).
11.2. Attach frame hook (5) to middle frame (J) with lock screws (3).
11.3. Attach door hook (6) to right door (O) with locks screws (3).
3
437590 Tool Storage Shed
Hardware Identification
1. Wood screw (2”)
36 pcs
2. Shelf screw (1
5
/
8”)
16 pcs
3. Lock screw (
3
/4”)
10 pcs
4. Lock
1 pc
5. Frame hook
1 pc
6. Door hook
1 pc
M.Side frame
2 pcs
N. Left door
1 pc
O. Right door
1 pc
P. Roof
1 pc
14
437590 Tool Storage Shed
1
P
K
STEP 10:
10.1. Carefully place roof (P) on top so that the wood studs on the bottom of the roof fit flush
against the front and back of the unit.
Note: Make sure the roof faces correctly so that the top, front does not have the wood frame. Only the
sides and back of the top should have a wood frame.
10.2. Secure roof (P) to unit at top frame (K) and back panel with wood screws (1).
13
437590 Tool Storage Shed
STEP 9:
9.1. Hook left door (N) to left side frame (M) at the hinges as shown.
9.2. Repeat Step 9.1 to hook right door (O) to right side frame (M).
Note: The caps on the doors can be adjusted by twisting if the doors are not hooking on the hinges
properly.
N
N
O
M
M
4
437590 Tool Storage Shed
HELPFUL HINTS FOR ASSEMBLING THE TOOL STORAGE SHED
GENERAL HINTS
• Lay out all of the parts and hardware according to the diagram to make sure you have what’s
needed for assembly.
• If you find any parts missing or defective, contact Customer Service at 1-800-846-3000.
• Briefly read through the instructions before beginning assembly.
• Have cloth handy to place under any of the wood panels as you install. This will protect your unit
or any work surfaces from scratches.
• Having someone assist you by holding parts in place during installation will make the process
easier. Some panels are very large.
• Make sure all panels and parts are correctly lined up before tightening.
Assembly Tools Required
Phillips screwdriver
5
437590 Tool Storage Shed
1
A
B
C
SPECIFIC HINTS
STEP 1:
1.1. Attach left side panel (A) to base (C) with wood screws (1). Make sure the wood studs are
properly fitted into the grooves of the base.
1.2. Repeat Step 1.1 to attach right side panel (B).
Note: Having someone hold the side panels in place is helpful.
12
437590 Tool Storage Shed
A
1
B
C
STEP 8:
8.1. Attach the completed frame to the unit with wood screws (1) at left side panel (A), right side
panel (B), and base (C).
437590 Tool Storage Shed
11
K
L
1
MM
STEP 7:
7.1. Line up side frames (M) under top frame (K) and above bottom frame (L), as shown.
7.2. Secure the side frames with wood screws (1).
6
437590 Tool Storage Shed
D
E
1
STEP 2:
2.1. Join left and right back panels (E and D) at dowels.
Note: Dowels come already attached to left panel (E).
2.2. Secure the left and right back panels (E and D) with wood screws (1), as shown.
7
437590 Tool Storage Shed
1
1
A
B
E
D
STEP 3:
3.1. Attach left and right back panels (E and D) to the back of the unit with wood screw (1) at the
bottom, back of panels.
3.2. Use wood screws (1) to attached left side panel (A) to left back panel (E).
Note: Having someone hold the back panel from behind is useful for Steps 3.2 & 3.3.
3.3. Repeat Step 3.2 to attach right side panel (B) to right back panel (D).
10
437590 Tool Storage Shed
STEP 6:
6.1. Attach top frame (K) to middle frame (J) at dowel. Make sure the holes on the frames face out.
6.2. Secure top frame (K) and middle frame (J) with wood screws (1), as shown.
6.3. Repeat steps 6.1-6.2 to attach bottom frame (L) to middle frame (J).
J
K
L
1
437590 Tool Storage Shed
9
STEP 5:
5.1. Attach middle shelf (I) with shelf screws (2) to left shelf panel (F) and right shelf panel (G), as
shown.
Note: Having someone hold right shelf panel (G) in place is helpful for Step 5.1.
5.2. Attach top shelf (H) with shelf screws (2).
A
F
G
H
I
2
8
437590 Tool Storage Shed
STEP 4:
4.1. Attach left shelf panel (F) to left side panel (A) with shelf screws (2).
A
2
F
/