Ignition WAL-L412 BP User manual

Brand: Ignition

Model: WAL-L412 BP

Category: Stroboscopes & disco lights

Type: User manual

This manual is also suitable for

WAL-L412 BP

LED spotlight

User manual

Musikhaus Thomann

Thomann GmbH

Hans-Thomann-Straße 1

96138 Burgebrach

Germany

Telephone: +49 (0) 9546 9223-0

E-mail: [email protected]

Internet: www.thomann.de

13.04.2021, ID: 461723 (V3)

Table of contents

1 General information................................................................................................................................. 6

1.1 Further information........................................................................................................................... 7

1.2 Notational conventions.................................................................................................................... 8

1.3 Symbols and signal words............................................................................................................... 8

2 Safety instructions.................................................................................................................................. 11

3 Features....................................................................................................................................................... 15

4 Installation.................................................................................................................................................. 17

4.1 Dealing with lithium batteries..................................................................................................... 22

5 Starting up.................................................................................................................................................. 24

6 Connections and controls................................................................................................................... 26

7 Operating.................................................................................................................................................... 32

7.1 Starting the device........................................................................................................................... 32

7.2 Main menu.......................................................................................................................................... 32

7.3 Menu overview................................................................................................................................. 39

7.4 Functions in 4-channel DMX mode........................................................................................... 40

Table of contents

WAL-L412 BP

LED spotlight

7.5 Functions in 6-channel DMX mode........................................................................................... 40

7.6 Functions in 9-channel DMX mode........................................................................................... 42

8 Technical specications....................................................................................................................... 48

9 Plug and connection assignments.................................................................................................. 51

10 Troubleshooting...................................................................................................................................... 52

11 Cleaning....................................................................................................................................................... 55

12 Protecting the environment.............................................................................................................. 56

Table of contents

WAL-L412 BP

LED spotlight

WAL-L412 BP

LED spotlight

1 General information

This user manual contains important information on the safe operation of the device. Read and

follow all safety notes and all instructions. Save this manual for future reference. Make sure

that it is available to all persons using this device. If you sell the device to another user, be sure

that they also receive this manual.

Our products and user manuals are subject to a process of continuous development. We there‐

fore reserve the right to make changes without notice. Please refer to the latest version of the

user manual which is ready for download under www.thomann.de.

General information

WAL-L412 BP

LED spotlight

1.1 Further information

On our website (www.thomann.de) you will nd lots of further information and details on the

following points:

Download This manual is also available as PDF le for you to download.

Keyword search

Use the search function in the electronic version to nd the topics of

interest for you quickly.

Online guides

Our online guides provide detailed information on technical basics

and terms.

Personal consultation For personal consultation please contact our technical hotline.

Service

If you have any problems with the device the customer service will

gladly assist you.

General information

WAL-L412 BP

LED spotlight

1.2 Notational conventions

This manual uses the following notational conventions:

The letterings for connectors and controls are marked by square brackets and italics.

Examples: [VOLUME] control, [Mono] button.

Texts and values displayed on the device are marked by quotation marks and italics.

Examples: ‘24ch’ , ‘OFF’ .

1.3 Symbols and signal words

In this section you will nd an overview of the meaning of symbols and signal words that are

used in this manual.

Letterings

Displays

General information

WAL-L412 BP

LED spotlight

Signal word Meaning

DANGER! This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

WARNING! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in death or serious

injury if it is not avoided.

NOTICE! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

Warning signs Type of danger

Warning – high-voltage.

Warning – dangerous optical radiation.

General information

WAL-L412 BP

LED spotlight

Warning signs Type of danger

Warning – suspended load.

Warning – danger zone.

General information

WAL-L412 BP

LED spotlight

2 Safety instructions

This device is intended for use as an electronic lighting eect by means of LED technology. The

device is designed for professional use only and is not suitable for use in households. Use the

device only as described in this user manual. Any other use or use under other operating con‐

ditions is considered to be improper and may result in personal injury or property damage. No

liability will be assumed for damages resulting from improper use.

This device may be used only by persons with sucient physical, sensorial, and intellectual

abilities and having corresponding knowledge and experience. Other persons may use this

device only if they are supervised or instructed by a person who is responsible for their safety.

Extend the operating life of the device by regular breaks and by avoiding frequent

switching on and o. The device is not suitable for continuous operation.

Intended use

Safety instructions

WAL-L412 BP

LED spotlight

Safety

DANGER!

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking

hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and

choke! Never let children unattended use electrical devices.

DANGER!

Electric shock caused by high voltages inside

Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts

inside. Do not use the device if covers, protectors or optical components are missing or damaged.

DANGER!

Electric shock caused by short-circuit

Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable

or the plug. Failure to do so could result in electric shock/death or re. If in doubt, seek advice from a registered electrician.

WARNING!

Eye damage caused by high light intensity

Never look directly into the light source.

Safety instructions

WAL-L412 BP

LED spotlight

WARNING!

Risk of epileptic shock

Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.

WARNING!

Incorrect handling of lithium batteries can result in injury

In the event of a short circuit, overheating or mechanical damage, lithium batteries can cause severe injuries. Follow the advice on

the correct handling of lithium batteries in the present section.

NOTICE!

Risk of re

Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked ames.

NOTICE!

Risk of re due to incorrect polarity

Incorrectly inserted batteries may destroy the device or the batteries. Ensure that proper polarity is observed when inserting bat‐

teries.

NOTICE!

Possible damage by leaking batteries

Leaking batteries can cause permanent damage to the device. Take batteries out of the device if it is not going to be used for a

longer period.

Safety instructions

WAL-L412 BP

LED spotlight

NOTICE!

Possible staining

The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate

or PVC oor and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the oor, but

use felt-pad oor protectors or a carpet.

NOTICE!

Possible damage to lithium-ion batteries through incorrect storage

By deep discharge, lithium-ion batteries can be permanently damaged or lose some of their capacity. Before long breaks, charge the

batteries to around 50 % of their capacity and then switch o the device. Store the device at room temperature or cooler in an envi‐

ronment as dry as possible. If the batteries are stored for a longer period, recharge them to 50 % every three months. Fully charge

the batteries only shortly before use at room temperature.

Safety instructions

WAL-L412 BP

LED spotlight

3 Features

Special features of the device:

n Four four-colour LEDs (RGBW, 12 W each)

n Battery-operated LED spotlight

n Operation in DMX mode (4, 6 or 9 channels)

n Foldable carrying handle on the top

n Spotlight with adjustable inclination angle

n Control via DMX, Wireless DMX, with the optionally available infrared remote control (item

no. 354223) as well as the buttons and the display on the device

n Numerous pre-programmed mixed colours and eects programmes

n Standing or hanging mounting

n Additional diusion lters available: 20° (item no. 461726), 40° (item no. 461727), 15x60°

(item no. 471120)

n Compatible charging station (Item no. 461728, optionally available).

n Compatible Touring Case 4in1 (Item no. 461732) or 6in1 (Item no. 461733) with power

supply for charging optionally available.

Features

WAL-L412 BP

LED spotlight

For technological reasons, the light output of LEDs decreases over their lifetime. This eect

increases with higher operating temperature. You can extend the service life of the illuminants

by providing adequate ventilation and operating the LEDs with the lowest possible brightness.

Features

WAL-L412 BP

LED spotlight

4 Installation

Unpack and check carefully there is no transportation damage before using the unit. Keep the

equipment packaging. To fully protect the product against vibration, dust and moisture during

transportation or storage use the original packaging or your own packaging material suitable

for transport or storage, respectively.

WARNING!

Risk of injury caused by falling objects

Make sure that the installation complies with the standards and rules that apply

in your country. Always secure the device with a secondary safety attachment,

such as a safety cable or a safety chain.

Installation

WAL-L412 BP

LED spotlight

NOTICE!

Risk of overheating

The distance between light output and the illuminated surface must be more

than 1.5 m (19.7in).

Provide sucient ventilation.

The ambient temperature must always be below 40 °C (104 °F).

NOTICE!

Possible data transmission errors

For error-free operation make use of dedicated DMX cables and do not use ordi‐

nary microphone cables.

Never connect the DMX input or output to audio devices such as mixers or ampli‐

ers.

Installation

WAL-L412 BP

LED spotlight

Equipment with degree of protection IP54 are dust protected and completely protected

against contact (rst code number). They are also protected against splash water from any

angle (second code digit). That is why this equipment can also be used outdoors. Event tech‐

nology equipment is generally only designed for temporary use however (event lighting) and

not for permanent use outdoors.

The specied degree of protection does not make a statement about the weather resistance of

the equipment (resistance to changing ambient conditions as well as against the eects of

sunlight and UV rays).

The seals and screw connections of the equipment must be checked regularly to ensure a

fault-free operation. In cases of doubt, consult a specialist workshop in due time.

You can install the unit in hanging or standing position. When in use, the device must always

be attached to a solid surface or an approved truss. Use the provided openings of the Omega

brackets for xing.

Always work from a stable platform whenever installing, moving or servicing the unit. In doing

so, the area underneath the unit must be cordoned o.

The safety cable must be threaded through the cut-outs in the housing.

Information about degree of

protection IP54

Mounting options

Installation

WAL-L412 BP

LED spotlight

Please note that this device must not be connected to a dimmer.

The infrared receiver for the remote control signals is located in the display. Make sure it's not

obstructed.

Infrared sensor for the remote

control

Installation

WAL-L412 BP

LED spotlight

Page is loading ...

Ignition WAL-L412 BP User manual

Brand: Ignition

Model: WAL-L412 BP

Category: Stroboscopes & disco lights

Type: User manual

This manual is also suitable for

Download PDF

report

Ignition WAL-L412 BP User manual

This manual is also suitable for

Ignition WAL-L412 BP User manual

Related papers

Other documents