Parts:
1. Pump (Figure A)
2. LED lights
3. Plug In Adapter
4. Buddha Head Piece
5. Buddha Fountain
Set-up Instructions:
1. Install the headpiece as shown above.
2. If the cord is already connected to the adapter, unscrew
the cord from the adapter.
3. Install the pump by hooking it to the tubing coming
down from the fountain.
4. Pull the cord from the round hole from the back and
then connect the adapter to the cord.
5. Fill with water so the pump is fully submerged under
water. Optional to fill it to up ½ inch below the light.
6. Plug to the adapter and the water should start flowing
over the face of the buddha.
NOTE:
1. Do not let the pump run dry. If the pump is making
noise, it maybe running dry. This can void the warranty
of the pump.
i. See the level of water on a daily basis or every
two days depending on the weather.
2. Unplug the fountain if it will not be tended to for more
than 3 days.
3. If the water on the fountain is not flowing correctly
(please see video on the website), level the fountain so
that the flow of water is corrected.
For more troubleshooting, please email us and see the latest
videos online on our website.
All of Canary Products come with a hassle-free warranty of one
year.
We appreciate you letting us troubleshoot the problem. Email
us info@xbrand.us.
-
1
-
2
-
3
-
4
-
5
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
HoMedics WFL-BUDD Instruction book
-
Signature SG22159 Assembly And Care Instructions
-
Angelo Decor Buddha Operating instructions
-
Alpine GEM178 Operating instructions
-
-
Solstice Sculptures XST/500 User manual
-
Garden Oasis ENLIGHTENED BUDDHA FOUNTAIN Owner's manual
-
-
Canary Products FT973615 Operating instructions
-
ORE International RD-WXF00342B User manual
