Badger Basket LONDON DOLL PRAM Assembly Instruction

Brand: Badger Basket

Model: LONDON DOLL PRAM

Type: Assembly Instruction

This manual is also suitable for

55564

Badger Basket LONDON DOLL PRAM

The Badger Basket LONDON DOLL PRAM is a toy for children ages three and older. It is designed to be used with dolls and is not intended for use with real infants or pets. The pram is made of metal and fabric and features a padded mat, pillow, and boot. The canopy can be fully open or folded flat. The pram is easy to assemble and disassemble, and all of the parts can be cleaned with a damp cloth.

Here are some of the features and possible use cases of the Badger Basket LONDON DOLL PRAM:

Durability: The pram is made of metal and fabric, which makes it durable and long-lasting.

Badger Basket LONDON DOLL PRAM

Here are some of the features and possible use cases of the Badger Basket LONDON DOLL PRAM:

Durability: The pram is made of metal and fabric, which makes it durable and long-lasting.

1.0/0416/HF

LONDON DOLL PRAM

MODEL NUMBER*:

55564 - Gray

If you need product

parts, see below or Page 2!

Assembly and Use Instructions. Adult assembly Required.

Read all instructions before use.

This manual is part of the product and

must be saved for future reference.

VERSION CODE*:

1.0/0416/HF

* Model and Version numbers are needed

if replacement parts are requested

FOR REPLACEMENT PARTS:

Go to our web site: http://www.badgerbasket.com/parts

Or scan QR code at right with your smartphone

1.0/0416/HF

WARNING - CAUTION

WARNING

ADULT ASSEMBLY REQUIRED

DUE TO THE PRESENCE OF SMALL PARTS AND SHARP

POINTS DURING ASSEMBLY, KEEP OUT OF REACH OF

CHILDREN UNTIL ASSEMBLY IS COMPLETE.

BEFORE YOU BEGIN ASSEMBLY:

Check all parts. If anything is missing or not

satisfactory, please DO NOT call the store

or return the product to them. Please go online to:

http://www.badgerbasket.com/parts

Most problems are resolved

without you needing to leave home.

When contacting us, please have this

instruction manual, your product model number,

and your Version Code ready.

Your Model Number is: 55564

Your Version Code is: 1.0/0416/HF

READ ALL INSTRUCTIONS before use of this product. Use only the parts and

hardware provided by Badger Basket. Keep instructions for future use. Do not use the

product if it is damaged or broken. Periodically inspect the product to ensure all parts

remain tight. This item is a toy for dolls only. It is never to be used for real infants or

pets. No product is a substitute for adult supervision. Always supervise your child

during play. For children ages three (3) years and older. Never sit on or stand on the toy.

Badger Basket Company, PO Box 227, Edgar, WI 54426-0227 USA • Web: www.badgerbasket.com

Toll-Free (Mon-Thurs 7:00 AM-4:00 PM CST): 1-800-236-1310

Phone: 715-352-2311 • Fax: 715-352-3163

CARE INSTRUCTIONS:

Spot clean fabric with cold water and mild detergent and air dry.

Wipe the frame clean with a damp cloth as needed and dry thoroughly.

1.0/0416/HF

(A) 1 - Metal Chassis (B) 2 - Large Wheel

(E) 1 - Handle

(F) 1 SET - Hardware Kit (4xBolt, 4xSpacer, 4xCap Nut, Allen Wrench, Cap Wrench)

(G) 1 SET - Fabric Bedding (1xPadded Mat, 1xPillow, 1xBoot)

PARTS AND HARDWARE INCLUDED:

STEP 1: REVIEW THE FINAL ASSEMBLY DIAGRAM ON THE

LAST PAGE OF THIS MANUAL FOR AN ASSEMBLY OVERVIEW.

Attach the SMALL WHEELS (C) to the shorter wheel posts on the

METAL CHASSIS (A). Attach the LARGE WHEELS (B) to the longer

wheel posts on the METAL CHASSIS (A). Push the metal bracket at the

center of the wheel inward to open it (PHOTOS 1 and 2), slide the wheel

onto the end of the post, and release the bracket. The bracket locks over

the tip of the rod, and if you tug on the wheel it should not come off.

STEP 2: Attach the PRAM BODY (D) to the METAL CHASSIS (A). Line up the four hinges on

the CHASSIS with the four brackets on the BODY, and snap them in (PHOTOS 3 and 4). The

canopy end of the BODY (D) attaches on the SMALL WHEEL (C) side of the CHASSIS (A).

PHOTO 3 - Line up the Hinge PHOTO 4 - Snap into place

< PHOTO 1

Metal Bracket

closed

PHOTO 2 >

Metal Bracket

pushed open

1.0/0416/HF

STEP 4: Place the PADDED MAT and PILLOW (G) inside the PRAM

BODY (D). Attach the BOOT (G) to the outside of the PRAM BODY

(D). The BOOT (G) has elastic loops that stretch around the spindles

on the BODY (D), and also snaps that snap to the canopy.

STEP 5: The canopy can be fully open with the hinges locked to keep

it up, or unlock the hinges and fold it at.

(A) Metal Chassis (B) Large Wheel (C) Small Wheel (D) Pram Body (E) Handle

(F) Hardware (Bolts, Spacers, Cap Nuts)

(G) Fabric Bedding (Padded Mat, Pillow, Boot)

FINAL ASSEMBLY:

Boot Snaps

and Spindles

STEP 3: Attach the HANDLE (E) to the PRAM BODY (D) using the

HARDWARE KIT (F) (FOUR BOLTS, FOUR SPACERS, FOUR CAP

NUTS, ALLEN WRENCH and CAP WRENCH). Align all the parts as

shown in PHOTO 5.

Cap Nut

Spacer

Bolt

Pram Body (D)

Handle (E)

PHOTO 5

Badger Basket LONDON DOLL PRAM Assembly Instruction

Brand: Badger Basket

Model: LONDON DOLL PRAM

Type: Assembly Instruction

This manual is also suitable for

55564

Badger Basket LONDON DOLL PRAM

Here are some of the features and possible use cases of the Badger Basket LONDON DOLL PRAM:

Durability: The pram is made of metal and fabric, which makes it durable and long-lasting.

Download PDF

report

Badger Basket LONDON DOLL PRAM Assembly Instruction

This manual is also suitable for

Badger Basket LONDON DOLL PRAM Assembly Instruction

Related papers

Other documents