2. natural
  3. NATSG100

natural NATSG100, NATSG600 User manual

  • Hello! I am an AI chatbot trained to assist you with the natural NATSG100 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FORLAMINATES,HARDWOODANDENGINEERED
Installationinstructions
1.Checkfornails.
2.Sweepormop.
3.Rollout1widthofmembrane.
4.Cutrollatwall.
5.Installflooringplanks.
6.Rolloutnextwidth.
7.Sealseamsusingtheattachedtapebyremovingpaperstripandpressingthetapedownto
adheretomembrane.
Repeatsteps3to7untilflooriscompleted.
NOTE:WheninstallingNaturalSGinbasementorwhereamoisturebarrierisrequired,extendtheunderlayment1”-2”upthe
sidesofallwalls.ToensurethevaporbarrierqualitiesofNaturalSGaremaintained,avaportapeisrequiredtosealallseams
thatarenotsealedbytheSealGuardsystem.Newconcreteshouldcurefor60-90daysminimum,beforeinstallingflooring
products.Checkforexcessivemoistureinvariousareasbeforeinstallationreferringtoflooringmanufacturer’srecommendations.
Consultwithyourflooringspecialistforadditionalinstructions.
/