Kingston Technology KHX21C11T1K2/16X Datasheet

Category
Memory modules
Type
Datasheet

Kingston Technology KHX21C11T1K2/16X is a powerful and reliable memory module that delivers incredible performance and stability to your computer system. With a capacity of 16GB and a speed of DDR3-2133 CL11, it offers snappy responsiveness and smooth multitasking capabilities for demanding applications and games. Backed by Intel® XMP support, it allows for easy overclocking, letting you unleash its full potential. Experience faster load times, seamless video editing, and enhanced gaming sessions with Kingston's KHX21C11T1K2/16X memory module.

Kingston Technology KHX21C11T1K2/16X is a powerful and reliable memory module that delivers incredible performance and stability to your computer system. With a capacity of 16GB and a speed of DDR3-2133 CL11, it offers snappy responsiveness and smooth multitasking capabilities for demanding applications and games. Backed by Intel® XMP support, it allows for easy overclocking, letting you unleash its full potential. Experience faster load times, seamless video editing, and enhanced gaming sessions with Kingston's KHX21C11T1K2/16X memory module.

KHX21C11T1K2/16X
16GB (8GB 1G x 64-Bit x 2 pcs.)
DDR3-2133 CL11 240-Pin DIMM Kit
DESCRIPTION
Kingston's KHX21C11T1K2/16X is a kit of two 1G x 64-bit
(8GB) DDR3-2133 CL11 SDRAM (Synchronous DRAM), 2Rx8
memory modules, based on sixteen 512M x 8-bit FBGA
components per module. Each module kit supports Intel
®
XMP
(Extreme Memory Profiles). Total kit capacity is 16GB. Each
module kit has been tested to run at DDR3-2133 at a low
latency timing of 11-12-11 at 1.60V. The SPDs are pro-
grammed to JEDEC standard latency DDR3-1333 timing of
9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers.
The JEDEC standard electrical and mechanical specifications
are as follows:
Document No. 4806408-001.A00 05/09/12 Page 1
SPECIFICATIONS
CL(IDD) 9 cycles
Row Cycle Time (tRCmin) 49.5ns (min.)
Refresh to Active/Refresh 260ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 36ns (min.)
Maximum Operating Power 2.460 W* (per module)
UL Rating 94 V - 0
Operating Temperature 0
o
C to 85
o
C
Storage Temperature -55
o
C to +100
o
C
*Power will vary depending on the SDRAM used.
FEATURES
JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
667MHz fCK for 1333Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE
< 95°C
Asynchronous Reset
PCB : Height 2.401” (61.00mm) w/ heatsink, double sided
component
Memory Module Specifi cations
Continued >>
XMP TIMING PARAMETERS
JEDEC: DDR3-1333 CL9-9-9 @1.5V
XMP Profile #1: D3-2133 CL11-12-11 @1.60V
XMP Profile #2: D3-1600 CL9-9-9 @1.5V
Keyed
Keyed
Keyed
MODULE DIMENSIONS
Document No. 4806408-001.A00 Page 2
MODULE WITH HEAT SPREADER
continued HyperX
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at
the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computers
faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components.
FOR MORE INFORMATION, GO TO WWW.KINGSTON.COM
Units: millimeters
30.00
18.80
15.80
11.00
8.00
0.00
133.35
0.00
54.70
TECHNOLOGY
61mm
2.401
  • Page 1 1
  • Page 2 2

Kingston Technology KHX21C11T1K2/16X Datasheet

Category
Memory modules
Type
Datasheet

Kingston Technology KHX21C11T1K2/16X is a powerful and reliable memory module that delivers incredible performance and stability to your computer system. With a capacity of 16GB and a speed of DDR3-2133 CL11, it offers snappy responsiveness and smooth multitasking capabilities for demanding applications and games. Backed by Intel® XMP support, it allows for easy overclocking, letting you unleash its full potential. Experience faster load times, seamless video editing, and enhanced gaming sessions with Kingston's KHX21C11T1K2/16X memory module.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI