2. Home
  3. Domestic appliances
  4. Sanitary ware
  5. Kitchen sinks
  6. BLANCO
  7. 511-738

BLANCO 511-738, Axis 511-738 User manual

  • Hello! I am an AI chatbot trained to assist you with the BLANCO 511-738 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
SINK SPECIFICATIONS
Pinnacle Series
BLANCOAXIS 6S™ Left Drainboard
Model 511-738
FEATURED MODEL
511-738 7" & 5-1/8" bowl depths
FEATURES
• 18gauge,304seriesstainlesssteel
• Slidingsafetyglasscuttingboardandremovable
colanderincluded
• 18/10chrome/nickelcontent
• Long-lasting,easy-to-clean,satinpolishnish
• Reardrainplacement
• Pop-upwasteformainbowl
CODE/STANDARDS COMPLIANCE
ASME112.19.3-00
IAPMO/UPClisted
INCLUDED ACCESSORIES
Basket Strainer
Sliding Safety Glass Cutting Board
Custom Stainless Steel Colander
WARRANTY
BlancoAmerica’sPinnacleSeriessinksfeaturea
LIMITEDLIFETIMEWARRANTYtobefreeofall
manufacturingdefectsundernormaluse.
Seeourcompletewarrantyfordetails.
WhileBlancoAmericaendeavorstoprovideaccurate
information,alldimensionsarenominal,cannotbe
guaranteed,andaresubjecttochangeorcancellation.
BlancoAmericaassumesnoresponsibilityforuseof
supersededorvoidedspecications.
© 2008 BLANCO AMERICA 09/08
SPEC-003
MODEL511-738
BLANCO AMERICA
800.451.5782
www.blancoamerica.com
PRODUCT SPECIFICATION
Drop-in sink to be 39-3/8" in length and
20-1/16" in front-to-back depth. Sink to be
made from 18 gauge, 304 series stainless
steel, with 18/10 chrome/nickel content and
satin polished nish. Sink to feature rear
drain placement and straight bowl sides with
approximately 1" corner radius. Sink to be
BlancoModel511-738,withleftbowldepthof
7"andrightbowldepthof5-1/8".
JOB INFORMATION
JobName:
Contact:
DateSpecied:
Specier:
Contractor:
NOMINAL DIMENSIONS
BOWLDEPTH DRAIN
MODEL OVERALL LEFT RIGHT DIAMETER
511-738 39-3/8x20-1/16 7 5-1/8 3-1/2
DXFcutouttemplatesavailableonourwebsite.
KNOCKOUT HOLE LOCATIONS
Pre-drilled for single-hole faucet
and remote drain operation.
No addit ional ho l es available .
/