Black Box RM095A-R2 is the most convenient way to wallmount a patch panel or other network components. Standard 19" rails with 12-24 holes hold equipment up to 6U high. The bracket measures 10.9"H x 19.5"W x 9.5"D and provides enough depth for you to mount even oversized components. The Hinged Panel (included with the Wallmount Swing Bracket) enables you to easily swing out components to access cables or DIP switches. The quick-release, spring-loaded thumbscrews mean no tools are required. Or, for components that don’t need rear access, you can order the Wallmount Bracket by itself.
Black Box RM095A-R2 is the most convenient way to wallmount a patch panel or other network components. Standard 19" rails with 12-24 holes hold equipment up to 6U high. The bracket measures 10.9"H x 19.5"W x 9.5"D and provides enough depth for you to mount even oversized components. The Hinged Panel (included with the Wallmount Swing Bracket) enables you to easily swing out components to access cables or DIP switches. The quick-release, spring-loaded thumbscrews mean no tools are required. Or, for components that don’t need rear access, you can order the Wallmount Bracket by itself.
Black Box RM095A-R2 is the most convenient way to wallmount a patch panel or other network components. Standard 19" rails with 12-24 holes hold equipment up to 6U high. The bracket measures 10.9"H x 19.5"W x 9.5"D and provides enough depth for you to mount even oversized components. The Hinged Panel (included with the Wallmount Swing Bracket) enables you to easily swing out components to access cables or DIP switches. The quick-release, spring-loaded thumbscrews mean no tools are required. Or, for components that don’t need rear access, you can order the Wallmount Bracket by itself.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI