MasterCraft 054-8259-0 Owner's manual

Brand: MasterCraft

Model: 054-8259-0

Category: Power tools

Type: Owner's manual

This manual is also suitable for

5A 4-Position Variable Speed Orbital

MasterCraft 054-8259-0 is an orbital jigsaw suitable for cutting different materials like wood or metal. It has variable speed that ranges from 800 to 3000 strokes per minute and cutting angle range from 0 to 45 degrees. The jigsaw comes with a tool-less blade clamp for quick and easy blade changes and an LED work light that will help you to see clearly what you are cutting. Other features include dust blower switch, orbital control lever, blade-guide roller, hex key storage and lock-on button.

headline bars

continuation tabs

notes

warnings

model no. 054-8259-0

ORBITAL JIGSAW

IMPORTANT:

Read and understand this instruction manual thoroughly before

using the product.

INSTRUCTION

MANUAL

headline bars

continuation tabs

notes

warnings

TABLE OF CONTENTS

Technical Specifications 4

Safety Guidelines 5–8

Key Parts Diagram 9

Important Information 10–12

Assembly Instructions 13–14

Operating Instructions 15–17

Maintenance 18

Troubleshooting 19

Part list 20–21

Warranty 22–23

NOTE: If any parts are missing or damaged, or if you have any

questions, please call our toll-free helpline at 1-800-689-9928

SAVE THESE INSTRUCTIONS

• This manual contains important safety and operating

instructions. Read all instructions and follow them with

use of this product.

TABLE OF CONTENTS

headline bars

continuation tabs

notes

warnings

model no. 054-8259-0 | contact us 1.800.689.9928

TECHNICAL SPECIFICATIONS

Rated power input 5A

Rated voltage 120V~, 60Hz

No load speed 800–3000 SPM

Length of stroke 13/16" (20 mm)

Maximum capacities:

Wood

Metal

3 11/32" (85 mm)

1/4" (6 mm)

Cutting angle range 0–45°

Available blade type T- and U-shank

Tool weight 4 lb 8 oz (2.04 kg)

RULES FOR SAFE OPERATION

WARNING!

Safety symbols in this Instruction Manual are used to flag possible dangers. The safety symbols

and their explanations require your full understanding. The safety warnings do not, by themselves,

eliminate any danger, nor are they substitutes for proper accident prevention measures.

WARNING!

This Safety Alert Symbol indicates caution, warning, or danger. Failure to obey a safety warning

can result in serious injury to yourself or others. To reduce the risk of injury, fire, or electric shock,

always follow the safety precautions.

KNOW YOUR TOOL

To operate this tool, carefully read this Instruction Manual and all labels affixed to the Orbital Jigsaw before

using. Keep this manual available for future reference.

IMPORTANT

This tool should only be serviced by a qualified service technician. For more information, call the toll-free

helpline at 1-800-689-9928.

READ ALL INSTRUCTIONS THOROUGHLY

SAVE THESE INSTRUCTIONS

SAFETY GUIDELINES FOR POWER TOOLS

WARNING!

Read all safety warnings and instructions. Failure to follow the warnings and instructions may

result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated

(cordless) power tool.

WORK AREA SAFETY

• Keepworkareacleanandwelllit.Cluttered or dark areas invite accidents.

• Donotoperatepowertoolsinexplosiveatmospheres,suchasinthepresenceofflammable

liquids,gasesordust.Power tools create sparks, which may ignite the dust or fumes.

• Keepchildrenandbystandersawaywhileoperatingapowertool.Distractions can cause you to

lose control.

SAFETY GUIDELINES

headline bars

continuation tabs

notes

warnings

model no. 054-8259-0 | contact us 1.800.689.9928

ELECTRICAL SAFETY

• Powertoolplugsmustmatchtheoutlet.Never modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.Unmodified plugs and matching outlets will reduce risk of

electric shock.

• Avoidbodycontactwithearthedorgroundedsurfacessuchaspipes,radiators,rangesand

refrigerators.There is an increased risk of electric shock if your body is earthed or grounded.

• Donotexposepowertoolstorainorwetconditions.Water entering a power tool will increase the

risk of electric shock.

• Donotabusethecord.Never use the cord for carrying, pulling or unplugging the power tool. Keep the

cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of

electric shock.

• Whenoperatingapowertooloutdoors,useanextensioncordsuitableforoutdooruse. Use of a

cord suitable for outdoor use reduces the risk of electric shock.

• Ifoperatingapowertoolsinadamplocationisunavoidable,useaground-faultcircuit

interrupter(GFCI)protectedsupply. Use of a GFCI reduces the risk of electric shock.

PERSONAL SAFETY

• Stayalert,watchwhatyouaredoingandusecommonsensewhenoperatingapowertool.Do

not use a power tool while you are tired or under the influence of drugs, alcohol or medication.A moment of

inattention while operating power tools may result in serious personal injury.

• Usepersonalprotectiveequipment.Always wear eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce

personal injuries.

• Preventunintentionalstarting.Ensure that the switch is in the off-position before connecting to power

source or battery pack, picking up or carrying the tool.Carrying power tools with your finger on the switch

or energising power tools that have the switch on invites accidents.

• Removeanyadjustingkeyorwrenchbeforeturningthepowertoolon.A wrench or a key left

attached to a rotating part of the power tool may result in personal injury.

• Donotoverreach.Keepproperfootingandbalanceatalltimes.This enables better control of the

power tool in unexpected situations.

• Dressproperly.Donotwearlooseclothingorjewellery.Keepyourhair,clothingandgloves

awayfrommovingparts. Loose clothes, jewellery or long hair can be caught in moving parts.

• Ifdevicesareprovidedfortheconnectionofdustextractionandcollectionfacilities,ensurethat

theseareconnectedandproperlyused.Use of dust collection devices can reduce dust-related hazards.

POWER TOOL USE AND CARE

• Donotforcethepowertool. Use the correct power tool for your application. The correct power tool will

do the job better and more safely at the rate for which it was designed.

• Donotusethepowertooliftheswitchdoesnotturnitonandoff.Any power tool that cannot be

controlled with the switch is dangerous and must be repaired.

• Disconnecttheplugfromthepowersourceand/orthebatterypackfromthepowertoolbefore

makinganyadjustments,changingaccessories,orstoringpowertools.Such preventive safety

measures reduce the risk of starting the power tool accidentally.

• Storeidlepowertoolsoutofthereachofchildrenanddonotallowpersonsunfamiliarwiththe

powertoolortheseinstructionstooperatethepowertool.Power tools are dangerous in the hands

of untrained users.

• Maintainpowertools.Check for misalignment or binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power tools.

• Keepcuttingtoolssharpandclean.Properly maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control;

• Usethepowertool,accessories,toolbits,etc.inaccordancewiththeseinstructions,takinginto

accounttheworkingconditionsandtheworktobeperformed.Use of the power tool for operations

different from those intended could result in a hazardous situation.

SERVICE

• Haveyourpowertoolservicedbyaqualifiedrepairpersonusingonlyidenticalreplacement

parts.This will ensure that the safety of the power tool is maintained.

SAFETY GUIDELINES

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

model no. 054-8259-0 | contact us 1.800.689.9928

PACKAGE CONTENTS

Orbital jigsaw, edge guide, hex key (installed on the tool), wood cutting blade and instruction manual.

KEY PARTS DIAGRAM

4 5

No. Part No. Part

1 On/off trigger switch 7 Blade-guide roller

2 Lock-on button 8 LED worklight

3 Variable-speed dial 9 Dust blower switch

4 Orbital control lever 10 Blade

5 Shoe plate 11 Hex key storage

6 Tool-less blade clamp

SAFETY GUIDELINES FOR JIGSAW

• Holdthepowertoolbytheinsulatedgrippingsurfaceswhenperforminganoperationwherethe

cuttingaccessorymaycontacthiddenwiringoritsowncord.If a cutting accessory contacts a “live” wire,

it may make the exposed metal parts of the power tool “live” and could give the operator an electric shock.

• Useclampsoranotherpracticalwaytosupporttheworkpieceandsecureittoastableplatform.

Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

• Thelabelonyourtoolmayincludethefollowingsymbols.Thesymbolsandtheirdefinitionsare

asfollows:

V ..................... Volts

A ..................... Amperes

Hz ................... Hertz

W .................... Watts

min ................. Minutes

............... Alternating current

............. Direct current

................... No-load speed

............... Class II Construction

…/min ........... Revolutions or reciprocation per minute

............... Grounding terminal

BPM ............... Beats per minute

.............. WARNING – To reduce the risk of injury, user must read instruction manual.

• Thesawblademustbelockedinitsholdersecurely.Check that it had been securely seated before use.

• Securematerialbeforecutting.Never hold it in your hand or across legs.

• Nevertouchthesawbladeimmediatelyafteruse.It may be hot after prolonged use.

• Alwayswearsafetygogglesoreyeprotectionwhenusingthistool.Use a dust mask or respirator or

connect the tool to an external dust vacuum if the cutting generates a great amount of dust.

• Keephandsawayfromcuttingarea.Donotreachunderthematerialbeingcut.The proximity of

the blade to your hand is hidden from your sight.

• Donotusedullordamagedsawbladesandaccessories.

• Protectyourhearing.Wear appropriate personal hearing protection during use. Under some conditions

noise from this product may contribute to hearing loss.

• Inspectthetoolcordsperiodicallyandifdamagedhavethemrepairedbyaqualifiedservice

technician.BEAWAREofthecordlocation.

WARNING!

• Remove the jigsaw from the package and examine it carefully. Do not discard the carton or

any packaging material until all parts have been examined.

FPO

KEY PARTS DIAGRAM

SAFETY GUIDELINES

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

model no. 054-8259-0 | contact us 1.800.689.9928

IMPORTANT INFORMATION

Before attempting to use this tool, become familiar with all of its operating features and safety requirements.

For optimum performance and safety, read the following operating instructions carefully before using.

LED WORKLIGHT

(ﬁg 1)

The LED worklight, located above the tool-less blade

clamp, will illuminate when the jigsaw is turned on. This

provides additional light on the surface of the workpiece

for operation in lower-light conditions.

The LED worklight turns on automatically when the tool

is plugged into a power source.

ON-BOARD BLADE STORAGE

(ﬁg 2)

The blade storage compartment is located on the rear

of the saw.

To open: pull the blade storage cover out. To close: push

the cover in with your thumb or finger.

ORBIT ADJUSTMENT

(ﬁg 3)

The jigsaw has orbital action, whereby the blade roller

guide moves back and forth to make the blade swing

slightly as it cuts.

Orbital action increases the speed of cut, but may result

in a rougher finish to the cut in some materials.

Set the orbit control lever to one of the four settings

according to degree of orbit action required:

“0”: No orbit action

“1”: Minimal orbit action

“2”: Medium orbit action

“3”: Maximum orbit action for the most aggressive action, for quick cutting plywood or soft material.

Experiment on a piece of scrap material to determine the optimum orbit action setting.

VARIABLE-SPEED DIAL

(ﬁg 4)

Your jigsaw is equipped with a variable-speed dial.

Rotate the speed dial to the “1” position for the lowest

speed. Rotate the speed dial to the “6” position for the

highest speed.

BLADE SELECTION

To obtain the best performance from the saw, it is

important to select the correct blade for the particular

application and type of material you wish to cut.

By doing this, you will get a smoother, faster cut and prolong blade life.

WARNING!

• Do not allow familiarity with the jigsaw to cause a lack of alertness. A fraction of a second

of carelessness is enough to cause severe injury.

• Never connect the jigsaw to the power source when you are assembling parts, making

adjustments, installing or removing cutting blade, cleaning, or when it is not in use.

Disconnecting the jigsaw will prevent accidental starting, which could cause serious

personal injury.

FPO

IMPORTANT INFORMATION

fig 2

Open

fig 1

LED

Worklight

fig 3

fig 4

Variable-speed

dial

NOTICE:

• Determine the optimum speed for cutting your workpiece by making a trial cut in a scrap piece of material.

• Metal should never be cut in orbital action.

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

model no. 054-8259-0 | contact us 1.800.689.9928

THE FOLLOWING CHART CAN HELP YOU PICK THE PROPER SPEED, BLADE

AND ORBIT ACTION

Workpiece to be cut Setting on the speed

dial

Teeth per inch of the

blade

Orbit

Soft wood 5–6 6 Max. orbit

Hard wood 3–4 6 Med. orbit

Mild steel, aluminum 3–6 14–24 No orbit

Stainless steel 3–4 14–24 No orbit

Plastic 1–4 10–12 Min. orbit

SAWDUST REMOVAL

Dust blower

The dust blower helps clear the cutting area of debris

created from the blade.

To turn the dust blower on: slide the dust blower switch

to the “

” position.

To turn the dust blower off: slide the dust blower switch

to the “

” position.

ASSEMBLY INSTRUCTIONS

INSTALLING THE SAW BLADE

(ﬁg 6)

1. Unplug the jigsaw from the power supply.

2. Turn the tool upside down, depress the tool-less

blade clamp, and insert the blade into the slot of the

clamp as far as it can go. The back of the blade must

rest in the groove of the guide roller (fig 7).

3. Release the tool-less blade clamp to lock the blade.

Pull on the blade to check that it is securely locked in

place.

REMOVING THE SAW BLADE

1. Unplug the jigsaw from the power supply.

2. Turn the tool upside down; depress the tool-less

blade clamp to remove the blade.

IMPORTANT INFORMATION

ASSEMBLY INSTRUCTIONS

fig 5

On Off

fig 7

Guide roller

fig 6

CAUTION!

• For all work or when changing the blade, always wear protective gloves. The sharp edge

of the blade will cause personal injury. The blade can be very hot while working.

• Allow the blade to cool after use. The blade can become dangerously hot.

WARNING!

• Check that the blade is correctly attached. An incorrect or insecurely fastened blade can

come loose during operation and cause a hazard.

• Always ensure that the tool is turned OFF and unplugged from the power supply before

making any adjustments and installing any attachments.

FPO

NOTICE: For use with both “T” and “U” shanked blades.

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

model no. 054-8259-0 | contact us 1.800.689.9928

ATTACHING THE EDGE GUIDE

(ﬁg 8)

1. Loosen the two edge guide locking knobs.

2. Insert the bar of the edge guide through the slots

in the base of the jigsaw. The edge guide can be

inserted from either side of the base, with the edge

guide facing down.

3. Measure the distance from the edge of the

workpiece to the line of the cut. Slide the edge guide

to this desired distance and tighten the locking

knobs to secure the edge guide in place.

ADJUSTING THE SHOE PLATE FOR

ANGULAR CUTTING

(ﬁg 9)

1. Use the hex key to loosen the two hex screws

located on the underside of the tool.

2. Move the shoe plate slightly forward and tilt it to the

desired angle between 0° and 45° left or right, using

the scale marked on the base bracket. If the required

angle is 0° or 45° to the left or right, push the shoe

plate backwards so that the teeth on the shoe plate

mesh with the retaining teeth.

3. Securely retighten the hex screws.

Accurate work requires a trial cut: measure the work after cutting and reset the angle setting until the correct

setting is achieved.

OPERATING INSTRUCTIONS

TURNING ON AND OFF

(ﬁg 10)

1. Connect the power cord of your jigsaw to a standard

household power outlet.

2. To turn the saw ON, depress the on/off trigger

switch.

3. To turn the tool OFF, release the trigger switch.

4. To lock the on/off trigger switch in the “on” position,

press the trigger switch and, while holding it “on”,

press in the lock-on button from either side. The

lock-on button allows the operator to keep the jigsaw running without squeezing the trigger switch. This

feature is convenient for continuous sawing applications.

5. To release the lock-on button, press and release the trigger switch.

STRAIGHT CUTTING

(ﬁg 11)

A straight cut can be made by clamping a piece of wood

or a straight edge to the workpiece and guiding the edge

of the saw against it. Make the cut from one direction

only. Never cut partway and then complete the cut from

the opposite end.

The straight cut can be also made by using the parallel

guide supplied with this tool.

ASSEMBLY INSTRUCTIONS

OPERATING INSTRUCTIONS

fig 9

fig 8

WARNING!

• Always ensure that the tool is turned OFF and unplugged from the power supply before

making any adjustments and installing any attachments.

FPO

fig 10

fig 11

CAUTION!

• Allow the blade to come to a complete standstill before setting the jigsaw down.

WARNING!

• Always ensure that the tool is turned OFF and unplugged from the power supply before

making any adjustments and installing any attachments.

• Make sure the switch is not locked in the ON position before plugging your jigsaw.

FPO

headline bars

continuation tabs

notes

warnings

model no. 054-8259-0 | contact us 1.800.689.9928

GENERAL CUTTING

1. Make sure that the workpiece is firmly clamped to prevent the workpiece from moving while cutting.

2. Use the appropriate type and size of blade for the workpiece material and size.

3. Check for clearance behind the workpiece so that the blade will not impact another surface.

4. Clearly mark the line of cut.

5. Hold the saw firmly. Make sure to keep your hand on the insulated gripping areas only.

6. Use the variable speed dial to set the speed. Turn on the jigsaw and bring it to the maximum desired

cutting speed before applying the blade to the workpiece.

7. Do not force the tool. Keep the shoe plate flat against the workpiece while cutting. Use only enough steady

pressure on the blade to keep the saw cutting.

8. Reduce pressure as the blade comes to the end of the cut.

9. Allow the saw to come to a complete stop before removing the blade from the workpiece.

10. If sawing fiberglass, plaster, wallboard, or spackling compound, clean the saw motor vents frequently with

a vacuum or compressed air. Always wear safety goggles when cleaning tools using compressed air.These

materials are highly abrasive and may accelerate the wear on motor bearings and brushes.

METAL CUTTING

When cutting metal, clamp the material down. Be careful to move the saw along slowly. Use lower speeds.

Do not twist, bend, or force the blade. If the saw jumps or bounces, use a blade with finer teeth. If the blade

seems clogged when cutting soft metal, use a blade with coarser teeth.

For easier cutting, lubricate the blade with a stick of cutting wax, if available, or cutting oil when cutting steel.

Thin metal should be sandwiched between two pieces of wood or tightly clamped onto a single piece of wood

(wood on top of the metal). Draw the cut lines or design on the top piece of wood.

PLUNGE CUTTING (

(ﬁg 12)

Plunge cutting is useful and time-saving for making

rough openings in soft materials. It makes it unnecessary

to drill a hole for an inside or pocket cut.

1. Draw cutting lines for the opening.

2. Hold the saw firmly and tilt it forward so the toe of

the shoe plate rests on the workpiece.

3. Make sure that the blade is well clear of the

workpiece.

4. With the toe of the shoe plate held firmly against the workpiece to prevent side wobble, start the saw and

then gradually lower the blade into the workpiece..

5. When the blade touches the workpiece, continue pressing down on the toe of the shoe plate.

6. Slowly pivot the saw like a hinge until the blade cuts through the workpiece and the shoe plate rests flat

on the workpiece.

7. Then begin sawing in the usual manner along the cut line.

CUTTING CURVES

Curved cuts can be made with the jigsaw by guiding the direction of the cut with pressure applied on the saw.

CUTTING A CIRCLE

(ﬁg 13)

1. Before attaching the edge guide, draw a circle and drive a

finishing nail into the workpiece at the centre of the circle.

2. Drill or plunge cut near the circle’s edge.

3. Turn the saw off and disconnect the plug from the power

source.

4. Attach the edge guide to the saw with the edge

guide facing “up”.

5. The distance from the finishing nail to the blade

should be equal to the circle radius.

6. Insert the plug into the power source, hold the saw firmly, squeeze the trigger and slowly push the saw

forward. To make a hole, cut from inside the circle. To make wheels or discs, cut from the outside.

WARNING!

• Do not allow familiarity with the saw to make you careless.

• Always securely clamp and support the workpiece. Always maintain proper control of the

jigsaw. Failure to clamp and support the workpiece and loss of control of the saw could

result in serious injury.

FPO

OPERATING INSTRUCTIONS

NOTICE: Always apply a steady, firm, downward pressure on the front of the saw as you cut. This will keep

the saw blade from jumping out of the workpiece.

fig 12

fig 13

Finishing nail

WARNING!

• Do not try to plunge cut into hard materials, such as steel.

FPO

NOTICE: Cut slowly so the blade will stay straight in the cut. Place small wedges in the cut to keep the

inner circle from spreading when near the end of the cut.

headline bars

continuation tabs

notes

warnings

model no. 054-8259-0 | contact us 1.800.689.9928

MAINTENANCE

BEFORE EACH USE

1. Inspect the jigsaw, the trigger switch, the cord and the accessories for damage.

2. Check for damaged, missing, or worn parts.

3. Check for loose screws, misalignment or binding of moving parts, or any other condition that may affect

the operation.

4. If abnormal vibration or noise occurs, turn the tool off immediately and have the problem corrected before

further use.

5. Unplug the tool from power source before cleaning or performing any maintenance. Using compressed

air may be the most effective cleaning method. Always wear safety goggles when cleaning tools using

compressed air.

TROUBLESHOOTING

Problem Possible Causes Solution

The motor does not start The tool is not connected to a power source Connect the tool to a power source

Blade cannot be removed Saw dust in the slot Clean the clamp slot with a brush

Cutting is difficult Saw blade is worn Replace the saw blade

If the problem remains unsolved after performing the checks described above, call the toll-free helpline at

1-800-689-9928.

CAUTION!

• Do not allow brake fluids, gasoline and petroleum-based products, penetrating oil, etc.

come into contact with plastic parts. These substances contain chemicals that can

damage, weaken, or destroy plastic.

• When servicing, use only identical replacement parts. The use of any other parts may

create a hazard or cause damage to the product.

• Use only accessories that are recommended for this jigsaw by the manufacturer.

Accessories that may be suitable for one tool may become hazardous when used with

another tool.

• Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with

sharp cutting edges are less likely to bind, and are easier to control.

• To ensure safety and reliability, all repairs should be performed by a qualified service

technician.

FPO

MAINTENANCE

TROUBLESHOOTING

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

model no. 054-8259-0 | contact us 1.800.689.9928

EXPLODED VIEW

No. Part No. Description No. Part No. Description

1 2750883000 Rotor 27 2821924000 Base Plate Assembly

2 2823927000 Internal Wire Assembly 28 3703598000 Clamp

3 2740103000 Stator 29 3700149000 Square Washer

4 2822537000 Bearing Support Assembly 30 5620011000 Hexagon Socket Screw

5 3700214000 Washer 31 3550177000 Guiding Roller Support Pin

6 3704216000 Pendulum Plate 32 2822532000 Roller Support Set

7 3704217000 Counterweight 33 2823942000 Internal Wire Assembly

8 5700184000 Needle Bearing 34 4960008000 Carbon Brush

9 3700181000 Washer A 35 2800018000 Brush Holder

10 2822554000 Gear Set 36 3121037000 Cord Guard

11 3700197000 Washer 37 3120234000 Cord Anchorage

12 5660004000 Circlips For Shaft 38 5610024000 Tapping Screw

13 3520415000 Crank Roller 39 4810002000 Power Cord & Plug

14 3550147000 Needle Pin 40 2823943000 Internal Wire Assembly

15 2822536000 Plunger Assembly 41 5680019000 Hexagon Wrench

16 3660060000 Spring 42 3550146000 Located Pin

17 3650008000 Wire Guard 43 3126385000 Blade Cover

18 4930004000 Connecter 44 3700164000 Square Nut

19 4890462000 PCB Assembly 45 4870475000 Trigger Switch

20 4900270000 Speed Adjustor 46 3126146000 Lock Button

21 3700237000 Pendulum Lever Shaft 47 3660057000 Spring

22 3700191000 Cap 48 3520427000 Upper Sliding Bearing

23 3660050000 Spring B 49 3321806000 Right Housing

24 3120507000 Pendulum Lever 50 3321807000 Left Housing

25 3400175000 Knob 51 5610042000 Tapping Screw

26 3700675000 Rip Fence 52 3126386000 Blow Switch

If any parts are missing or damaged, or if you have any questions, please call the Toll-free Helpline,

at 1-800-689-9928.

PART LIST

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

model no. 054-8259-0 | contact us 1.800.689.9928

This Mastercraft product is guaranteed for a period of 3yearsfromthedateoforiginalretailpurchase

against defects in workmanship and materials, except for the following components:

a) Component A: Batteries, chargers and carrying case, which are guaranteed for a period of 2 years from the

date of original retail purchase against defects in workmanship and materials;

b) Component B: Accessories, which are guaranteed for a period of 1-year from the date of original retail

purchase against defects in workmanship and materials.

Subject to the conditions and limitations described below, this product, if returned to us with proof of purchase

within the stated warranty period and if covered under this warranty, will be repaired or replaced (with the

same model, or one of equal value or specification), at our option. We will bear the cost of any repair or

replacement and any costs of labour relating thereto.

These warranties are subject to the following conditions and limitations:

a) a bill of sale verifying the purchase and purchase date must be provided;

b) this warranty will not apply to any product or part thereof which is worn or broken or which has become

inoperative due to abuse, misuse, accidental damage, neglect or lack of proper installation, operation or

maintenance (as outlined in the applicable owner’s manual or operating instructions) or which is being

used for industrial, professional, commercial or rental purposes;

c) this warranty will not apply to normal wear and tear or to expendable parts or accessories that may be supplied

with the product that are expected to become inoperative or unusable after a seasonable period of use;

d) this warranty will not apply to routine maintenance and consumable items such as, but not limited to, fuel,

lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, tune-ups or adjustments;

e) this warranty will not apply where damage is caused by repairs made or attempted by others (i.e. persons

not authorized by the manufacturer);

f) this warranty will not apply to any product that was sold to the original purchaser as a reconditioned or

refurbished product (unless otherwise specified in writing);

g) this warranty will not apply to any product or part thereof if any part from another manufacturer is installed

therein or any repairs or alterations have been made or attempted by unauthorized persons;

h) this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited to, scratches,

dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners; and

i) this warranty will not apply to component parts sold by and identified as the product of another company,

which shall be covered under the product manufacturer’s warranty, if any.

Additional Limitations

This warranty applies only to the original purchaser and may not be transferred. Neither the retailer nor the manufacturer

shall be liable for any other expense, loss or damage, including, without limitation, any indirect, incidental, consequential

or exemplary damages arising in connection with the sale, use or inability to use this product.

Notice to Consumer

This warranty gives you specific legal rights, and you may have other rights, which may vary from province to

province. The provisions contained in this warranty are not intended to limit, modify, take away from, disclaim

or exclude any statutory warranties set forth in any applicable provincial or federal legislation.

IMPORTED BY MASTERCRAFT CANADA TORONTO, CANADA M4S 2B8

WARRANTY

MasterCraft 054-8259-0 Owner's manual

Brand: MasterCraft

Model: 054-8259-0

Category: Power tools

Type: Owner's manual

This manual is also suitable for

5A 4-Position Variable Speed Orbital

Download PDF

report

MasterCraft 054-8259-0 Owner's manual

This manual is also suitable for

MasterCraft 054-8259-0 Owner's manual

Related papers

Other documents