Sailor 6210 VHF Installation guide

Sailor
Brand
Sailor
Model
6210 VHF
Type
Installation guide
What’s in the box?
What do I need to fit it?
How to install the VHF on desktop and overhead
How to install the VHF flush mount
INSTALLATION GUIDE
SAILOR 6210 VHF
USER & INSTALLATION MANUAL
SAILOR 6210 VHF
U-Mounting
Bracket
Transceiver Gasket
Flush Mount
Bracket (2 pcs.)
Sun Screen
Power CableFuse
6.3x3.2mm (10AT)
User & Installation
Manual
Handmicrophone
Cradle
Wheel Knob
(2 pcs.)
Screw M4x45
TORX 20 (5 pcs.)
Square Nut
M4x7x2.2 (5 pcs.)
Screw M4x12
TORX 20 (3 pcs.)
Screw ø3.9x19
TORX 20 (3 pcs.)
Screw M4x12
TORX 20 (5 pcs.)
Screw ø3.9x19
TORX 20 (5 pcs.)
Thrane & Thrane A/S
•
info@thrane.com
•
www.thrane.com
TT98-128464-THR-G
A
A
BB
99-130248
Gasket
Flush Mount Bracket (2 pcs.)
Screw M4x45 TORX 20 (4 pcs.)
Connect to LOUD HAILER
(RED isolation on inner connector)
Connect to EXT. SPEAKER
(WHITE isolation on inner connector)
Connect to POWER +
(RED wire)
Connect to POWER -
(BLUE wire)
Square Nut M4x7x2.2 (4 pcs.)
Max wall thickness 26mm
Drilling plan on desktop and overhead
Cable assembly for waterproof installation
How to install the handmicrophone cradle
99-130249
4 x M4 or hole for
self-tapping ø3.9
150mm
53mm
71mm
196mm
23mm
9mm
Tilting ±20°
1.
2.
3.
4.
Connect the 4 cable connections with rubber vulcanizing tape as shown .....
Power Drill Jigsaw Screwdriver
TORX 20
Drill for M4 or
Ø3.9 self-tapping
NotNot
NotNot
Not
e!e!
e!e!
e!
- Firmly tie back and secure any wires not used in order to
avoid possibility for mutual shorting or shorting to ground!
- To ensure waterproof sealing:
If the surface isn’t plane and/or rigid remove the gasket and
seal with silicone sealant between the VHF and the surface.
Very important information!
Do not remove the membrane.
If you remove the membrane the radio will not be waterproof.
Membrane
Flush mount template
Remove material from shaded area only!
89mm
177mm
R2.5mm x 4
Thrane & Thrane A/S
•
info@thrane.com
•
www.thrane.com
TT98-128464-THR-G
INSTALLATION GUIDE
SAILOR 6210 VHF
Scale 1:1
Mounting template for handmicrophone cradle
Cutout template for flush mounting of the VHF
2 x M4 or hole for
self-tapping ø3.9
34.6mm
46.8mm
28.5mm
Scale 1:1
Handset
Speaker Microphone
Control
SAILOR 6208
6210
DSC Modem
External
Cable
Service
Loud Hailer (4 ohm)
Speaker (8 ohm)
External
ACC. Port
Power
Handset Option
Control Speaker Microphone
Connection Box
SAILOR 6209
Accessory
SAILOR 6204/05
Speaker Microphone
Control
SAILOR 6204/05
Speaker Microphone
Control
SAILOR 6204/05
SAILOR 6201
SAILOR 6201
Connection Box
99-130265-A
VHF
Handmicrophone
SAILOR 6202
OR
12V DC
110/220V AC
N163S
C
A
LL
H
i/Lo
MENU
1
6
/
9
VOL
S
Q
(HH størrelse)
DISPLAY
Push =
Enter
C
A
LL
H
i/Lo
MENU
1
6
/
9
VOL
S
Q
(HH størrelse)
DISPLAY
Push =
Enter
C
A
LL
H
i/Lo
MENU
1
6
/
9
VOL
S
Q
(HH størrelse)
DISPLAY
Push =
Enter
Aerial
RX/TX
12V Battery
N420
24V DC
System Configuration - Example
IMPIMP
IMPIMP
IMP
OROR
OROR
OR
TT
TT
T
ANAN
ANAN
AN
T!T!
T!T!
T!
If this template was printed from an electronic
file or copied, scaling (1:1) may not be correct.
Consequently do not attempt to use a printed
or copied template without prior checking of
dimensions.
NotNot
NotNot
Not
e!e!
e!e!
e!
The SAILOR 6204/05 Control Speaker Microphone
is not yet available.
IMPIMP
IMPIMP
IMP
OROR
OROR
OR
TT
TT
T
ANAN
ANAN
AN
T!T!
T!T!
T!
If this template was printed from an electronic
file or copied, scaling (1:1) may not be correct.
Consequently do not attempt to use a printed
or copied template without prior checking of
dimensions.
  • Page 1 1
  • Page 2 2

Sailor 6210 VHF Installation guide

Sailor
Brand
Sailor
Model
6210 VHF
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents