LE22S630P
LE24S630P
12
Air and Cable TV
Air: CH2~CH69
Cable: CH1~CH125
23.6inch
40W
PAL M/N, NTSC M
Air: CH2~CH69
Cable: CH1~CH125
21.6inch
1920x1080
40W
PAL M/N, NTSC M
INSTALLATION NOTES
Locate the TV in a room where light does not strike the screen directly. Total darkness or a reflection
on the screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Please do not attempt to rotate the TV on the stand.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature component
failure.
Stand Assemble Instruction
LE22S630P / LE24S630P
INSTALLATION
Place the TV with the display side down on a flat surface. Use a cloth to protect the display.
To rotate the base into the column: first rotate the base at anangle to the right, then turn left,
till hearing a voice of “ka” that will be the correct position. Then
fixing the base and column
by using a screw.
All the terminals are(from left to right):
USB, HDMI ,AV INPUT,HEADPHONE,RF
RF
SCAN
RECALL
USB
VOL
DISPLAY
HDMI
ZOOM
ARC
FAVORITE
H.LOCK
Display TV information.
Press to switch to HDMI mode.
Select the zoom picture
Press to launch the USB
Press to glance over all channels
in TV mode.
multimedia mode.
Press to last or next item in
multimedia mode.
No function.
, FAV
Return
You can select tune type and search channel here.
except PC Mode
Aspect Ratio,
Blue Screen Caption Reset Software Update(USB).
Reset will reset all the setting to default value.
Software Update(USB) is only used to Update
the TV set a software by USB.
MEDIA
MEDIA
three
Tune Type
5.OPTIPN MENU
ATTENTION:
1. USB HDD compatibility is not assured.
2. Some format video is not played for some file reason.
3. Haier will not bear any responsibility for saving facility
quality problem or date missing.
Input Source
TV
AV
HDMI
Media
Enter
OK
Please press “MENU” button first,and press number button
“1001” to enter into Hotel mode, then press “ ” button to
select “On” or “Off”.
Source Lock:Lock the input source which you want.
Default Source:Set the default input source when turning on
your TV.
Max Volume:Set max volume limited,this option allows you
to set the max volume level.
Default Volume:Power on default volume, press the button to
select the default volume.
Key Lock:Recall the default settings in Hotel mode.
Export Settings:Export hotel settings to USB device.
Import Settings:Import hotel settings from USB device.
/