Ninja NJ600 Series User manual

Ninja
Brand
Ninja
Model
NJ600 Series
Category
Food processors
Type
User manual

This manual is also suitable for

Ninja NJ600 Series

Below you will find brief product information about the Ninja NJ600 Series. This powerful blender is an excellent choice for anyone who wants to make quick and easy meals and drinks at home. With its 1000-watt motor and stacked blade assembly, the Ninja NJ600 Series can easily crush ice, blend frozen fruit, and puree vegetables. It also features a variety of pre-programmed settings for smoothies, sauces, and frozen drinks.

Here are some of the things you can do with the Ninja NJ600 Series:

  • Make smoothies and milkshakes
  • Crush ice for cocktails and mocktails
  • Puree vegetables for soups and sauces

Ninja NJ600 Series

Below you will find brief product information about the Ninja NJ600 Series. This powerful blender is an excellent choice for anyone who wants to make quick and easy meals and drinks at home. With its 1000-watt motor and stacked blade assembly, the Ninja NJ600 Series can easily crush ice, blend frozen fruit, and puree vegetables. It also features a variety of pre-programmed settings for smoothies, sauces, and frozen drinks.

Here are some of the things you can do with the Ninja NJ600 Series:

  • Make smoothies and milkshakes
  • Crush ice for cocktails and mocktails
  • Puree vegetables for soups and sauces
NJ600 Series
OWNER’S GUIDE
®
www.ninjakitchen.com
1 877 646-5288
Professional Blender
1
1-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NINJA
®
PROFESSIONAL BLENDER.
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a
polarized plug (one blade is wider than the
other). This plug will fit into a polarized
outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician to install the proper outlet. DO
NOT modify the plug in any way.
WARNING: Extension cords are
not recommended for use with this produc
t.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1 WARNING: Remove utensils prior to
processing. Failure to remove may
cause the jar to be damaged or to
shatter which may cause personal
injury.
2 WARNING: The Stacked Blade
Assembly is sharp, not locked in place
and removable, handle with care. When
handling the Stacked Blade Assembly,
always hold by the shaft. Failure to do
so will result in a risk of laceration.
3 WARNING: Stacked Blade Assembly
is sharp and not locked in place. If
using the pour spout, ensure the lid is
fully locked onto the pitcher. If pouring
with the lid removed, carefully remove
the Stacked Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.
4 CAUTION: Do not blend hot liquids,
doing so may cause excessive pressure
build-up, resulting in risk of the user
being burned.
5 To protect against electrical shock, do not
submerge the appliance or allow the power
cord to come into contact with water or any
other liquid.
6 DO NOT allow young children to operate the
appliance or use as a toy. Close supervision
is necessary when any appliance is used
near children.
7 Never leave an appliance unattended when
in use.
THIS BOOK COVERS MODEL NUMBERS:
NJ600
NJ600RC
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1000 Watts
Pitcher Capacity: 72 oz. (9 cups, 2.1 L)
MAX Liquid Capacity: 64 oz. (8 cups, 1.9 L)
2
www.ninjakitchen.com
any hot surfaces (such as gas or electric
burner or in a heated oven).
20 The use of attachments or accessories
including canning jars, not recommended by
the manufacturer may result in fire, electric
shock or personal injury.
21 DO NOT remove the pitcher from the motor
base while the appliance is in operation.
22 To reduce the risk of injury, NEVER operate
the appliance without the lid in place; DO
NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
23 DO NOT expose the pitcher to extreme
temperature changes.
24 DO NOT overfill. Never fill past the “Max”
line.
25 DO NOT operate the appliance empty.
26 To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
27 In the event that the unit overheats, a
thermal switch will become activated and
shut off the motor. To reset the appliance,
unplug the appliance and let it cool down
for approximately 15 minutes before using
again.
28 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use
this appliance for anything other than its
intended use. Do not use outdoors.
29 The maximum rating is based on the
Stacked Blade Assembly (pitcher) that drives
the greatest power and other recommended
attachments may draw significantly less
power or current.
SAVE THESE
INSTRUCTIONS
8 Turn the appliance Off and remove the
power cord from the electrical outlet
when not in use, before assembling or
disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the
electrical outlet. Never pull from the power
cord.
9 Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
10 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it
to disconnect from electrical outlet; instead
grasp the plug and pull to disconnect.
11 DO NOT operate any appliance with a
damaged cord or plug, or after the appliance
malfunctions, has been dropped or damaged
in any manner. This appliance has no
serviceable parts. Return the appliance to
SharkNinja Operating LLC for examination,
repair or adjustment.
12 DO NOT let the power cord hang over
the edge of table or counter or touch hot
surfaces such as the stove.
13 Always use the appliance on a dry, level
surface.
14 Keep hands, hair, clothing, as well as
utensils out of container while processing to
reduce the risk of severe injury to persons
or damage to the appliance. A scraper may
be used but only when the appliance is not
running.
15 Avoid contact with moving parts.
16 DO NOT attempt to sharpen blades.
17 DO NOT use the appliance if blade assembly
is bent or damaged.
18 To reduce risk of injury, never place the
blade assembly on base without pitcher
properly attached.
19 DO NOT operate this appliance on or near
3
1-877-646-5288
Contents
Thank you for
purchasing
the Ninja
®
Professional
Blender.
Getting Started .................................................................................................................4
Before First Use ................................................................................................................5
Assembly and Use of the Pitcher ........................................................................................ 6
Care & Maintenance .........................................................................................................8
Replacement Parts ............................................................................................................ 8
Blending Chart .................................................................................................................. 9
Troubleshooting Guide ....................................................................................................... 9
Warranty ........................................................................................................................10
The Ninja
®
Professional Blender is a high powered kitchen tool that is perfect for ice crushing, blending, pureeing and
controlled processing. Create all of your favorite recipes fast and easy with just one touch of a button. For best results,
be sure to carefully read all the instructions contained in the manual before using this appliance.
FEATURES:
• Easy lock lid with built-in pour spout
• Total Crushing
®
Technology
• Extra Large 72 oz. pitcher (MAX Liquid Capacity: 64 oz.) - BPA Free
• Easy to clean electronic control panel
• Cord storage
• Non Slip Bottom
4
www.ninjakitchen.com
Getting Started
a
d
e
f
b
c
g
h
i
g Motor Base
h Control Panel
i Non Slip Bottom
j Power Cord (not shown)
k Cord Storage (in back) (not shown)
a Lid with Locking Handle
b Locking Handle Release Button
c Pouring Spout with Cap
d Pitcher
e Stacked Blade Assembly
f Gear Shaft
5
1-877-646-5288
CAUTION:
Do not immerse the motor base into
water or any other liquid.
1 Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2 Wash the lid, pitcher and Stacked Blade Assembly in
warm, soapy water. When washing the Stacked Blade
Assembly, use a dishwashing utensil with a handle to
avoid direct hand contact with blades.
WARNING: Handle the Stacked Blade Assembly
with care when washing, as the blades are very
sharp.
3 Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 The pitcher, lid and Stacked Blade Assembly are all
dishwasher safe. It is recommended that the lid and
Stacked Blade Assembly go on the top rack. Ensure
that the Stacked Blade Assembly is removed from the
pitcher before placing in the dishwasher.
5 The motor base can be wiped clean with a damp cloth.
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the Blade Assembly
in first.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
pitcher. Failure to do so
will result in a risk of
laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.
6
www.ninjakitchen.com
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface.
3 Lower the pitcher onto the motor base. (Fig. 1)
4 Rotate the pitcher to the left as far as it will go. As the
pitcher rotates, it will lower and the safety tabs on the
bottom of the pitcher will slide under the safety tabs on
the top of the motor base.
(Fig. 2)
5 The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6 Holding the Stacked Blade Assembly by the shaft, place
it onto the gear shaft inside the pitcher. (Fig. 4) Ensure
that the Stacked Blade Assembly fits around the gear
shaft and that the blade shaft is standing straight.
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
7 Add the ingredients to the pitcher. Make sure your
total of ingredients don't go higher than the highest
measured marking line on the side of the pitcher.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“Max liquid” mark (64 oz.) on the pitcher
8 Plug the power cord into the electrical outlet.
IMPORTANT: As a safety feature, the motor will
not work if the pitcher and lid are not installed
correctly. When the pitcher and lid are installed
properly, the ready light will be solid green,
indicating that the blender is ready for use.
Fig. 2Fig. 1
Shaft
Fig. 4
ASSEMBLY
Fig. 3a
Fig. 3b
Assembly and Use of the Pitcher
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
OR
7
1-877-646-5288
Fig. 6
9 Review warning and caution statements on page 6
before proceeding.
10 Holding the lid by the handle in the upright position,
place it on top of the pitcher aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl’s handle. (Fig. 5)
11 Select the speed according to your blending
requirements*:
• Use the speed 1 button for processing and mixing.
• Use the speed 2 button for blending and ice
crushing.
• Use the speed 3 button for pureeing and liquefying.
• Use the pulse button for controlled chopping and
processing.
* See Blending Chart.
NOTE: If you need to add additional ingredients while
the blender is processing, open the pouring spout cap
and pour the ingredients in through the opening.
12 Press power button ( ) or the same speed button a
second time to stop the Stacked Blade Assembly or
press a different button to change the speed.
Assembly and Use of the Pitcher - cont.
Fig. 5
Locking Handle
Fig. 7
USE REMOVAL
13 To remove the pitcher, press the power button ( ) to
turn the appliance 'Off'. Wait for the Stacked Blade
Assembly to stop moving before removing. (Fig. 6)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
14 Open the pour spout cap and use the spout to empty
liquid contents.
15 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig. 7)
16 Make sure that the unit is unplugged when not in use.
8
www.ninjakitchen.com
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and accessories, please visit our website: www.ninjakitchen.com or feel free to contact customer
service at: 1-877-646-5288.
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before
inserting or removing any Stacked Blade
Assembly and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2
Hand Washing: Wash the container, lid and blade
assembly in warm, soapy water. When washing the
blade assembly, use a dish-washing utensil with a
handle to avoid direct hand contact with blades. Handle
blade assembly with care to avoid contact with sharp
edges. Rinse and air dry thoroughly.
Dishwasher: The container, lid and blade assembly
are all dishwasher safe.
The lid and blade assembly
is topshelf dishwasher safe.
Ensure that the blade
assembly is removed from the container before placing
in the dishwasher.
WARNING: Handle the Stacked Blade Assembly
with care when washing, as the blades are
sharp. Contact with the blades’ edges can result
in laceration.
3
Wipe the motor base clean with a damp cloth
.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
HOW TO STORE
1 Store the Ninja
®
Professional Blender upright with the
Stacked Blade Assembly inside the pitcher with the
lid secured on top. Do not place anything on top. Tuck
power cord in cord storage compartment in the back of
the unit.
RESETTING THE MOTOR THERMOSTAT
The Ninja
®
Professional Blender features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes. To reset the appliance, follow the resetting
procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the Stacked Blade Assembly.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
9
1-877-646-5288
BUTTON FUNCTION USE
POWER
On/Off Always turn appliance 'Off' when not in use.
1
Processing &
Mixing
Use to mix thin batters, gravies and marinades, scramble eggs, puree
cooked foods and uncooked fruits and chop vegetables for dips and salsa.
2
Blending & Ice
Crushing
Use to grate hard cheeses, cream soups*, beat dips, grind nuts, thorough
chopping, blend sauces* and spreads. Blend mixed drinks, powdered
drinks or milk shakes. Crush ice cubes for snow cones, chilled beverages
or frozen slushes.
3
Pureeing &
Liquefying
Use to mix smoothies, frappes, liquefy thick mixtures and blend whole
fruits and vegetables.
PULSE
Controlled
Processing &
Bursts of Power
Use to control chopping and processing.
Blending Chart
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or
Stacked Blade Assembly
doesn't Rotate.
Make sure the pitcher is securely placed on motor base.
Make sure the lid is securely on pitcher in the correct position (align arrows).
The blender is turned 'Off'. Press the power button ( ) to turn 'On'.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overheated or overloaded. Unplug and wait approximately 15
minutes before using again.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, or the pieces are not of
even size and processing smaller amounts per batch.
Food is Chopped Too Fine or
is Too Watery.
The food has been over processed. Use pulse button for controlled processing.
Food Collects On Lid or On
the Sides of the Pitcher.
The mixture is to thick. Add more liquid.
You Cannot Achieve Snow
From Solid Ice.
Do not use ice that has been sitting out or has started to melt. Use ice straight
from the freezer.
Troubleshooting Guide
* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja containers
are not intended for hot blending.
10
www.ninjakitchen.com
PRODUCT REGISTRATION
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja
®
product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
ONE (1) YEAR LIMITED WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)
year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.
If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we
will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the
amount of $19.95 to cover the cost of return shipping and handling must be included.*
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you insure
the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”.
SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
www.ninjakitchen.com
Ninja and Total Crushing are registered trademarks of SharkNinja Operating LLC.
Illustrations may differ from actual product. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without notice.
For SharkNinja U.S. Patent information visit www.sharkninja.com/USPatents.
© 2016 SharkNinja Operating LLC
NJ600_Series_30_E_IB_160212_2
PRINTED IN CHINA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Ninja NJ600 Series User manual

Ninja
Brand
Ninja
Model
NJ600 Series
Category
Food processors
Type
User manual
This manual is also suitable for

Ninja NJ600 Series

Below you will find brief product information about the Ninja NJ600 Series. This powerful blender is an excellent choice for anyone who wants to make quick and easy meals and drinks at home. With its 1000-watt motor and stacked blade assembly, the Ninja NJ600 Series can easily crush ice, blend frozen fruit, and puree vegetables. It also features a variety of pre-programmed settings for smoothies, sauces, and frozen drinks.

Here are some of the things you can do with the Ninja NJ600 Series:

  • Make smoothies and milkshakes
  • Crush ice for cocktails and mocktails
  • Puree vegetables for soups and sauces
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents