2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Premier Mounts
  6. CTM-MAC2

Premier Mounts CTM-MAC2 Installation guide

  • Hello! I'm your chat assistant. I have reviewed the installation instructions for the Premier Mounts CTM-MAC2 Mounting Bracket. This bracket is designed to securely hold a Mac mini behind compatible Premier Mounts. The manual provides a step-by-step guide on how to install the mounting bracket, secure the Mac mini and prevent theft using security hooks and screws. I'm here to answer your questions about the product and the installation process, feel free to ask.
  • What is the purpose of the Mac mini Mounting Bracket?
    How should the Mac mini be placed in the mounting bracket?
    What is included in the parts list?
Installation Instructions Visit the Premier Mounts website at http://www.mounts.com
Mac mini™ Mounting Bracket Installation Instructions
Parts List
CTM-MAC2
Mac mini™ Mounting Bracket
(Qty 1)
M5 Allen Wrench
(Qty 1)
PaneLock™ Security Hook
(Qty 2)
M6 x 12mm Lock-It™ Security Screw
(Qty 2)
1321 South State College Blvd
Fullerton, CA 92831 USA
Phone: 1.800.368.9700
Fax: 1.800.832.4888
Slide a PaneLock™ security
hook on the top mounting bar,
placing it on the outside edge
of the Mac mini™ Mounting
Bracket.
Make sure the PaneLock™
security hook is facing the
same direction as shown.
Step 4
Hook the Mac mini™ Mounting Bracket on the top mounting bar of the
mount
(Mac mini™ not shown).
Step 3
Step 5
The mount must be installed before attaching the Mac mini™ Mounting
Bracket.
Insert and tighten one (1)
M6 x 12mm Lock-It™ security
screw to attach the PaneLock™
security hook to the Mac mini™
Mounting Bracket.
Step 6
Repeat steps 4 and 5 to attach the remaining PaneLock™ security
hook on the other side of the Mac mini™ Mounting Bracket.
When nished, the mounting bar of the mount will effectively lock
the Mac mini™ in place and prevent theft.
The Mac mini™Mounting Bracket is the perfect accessory for securely
holding a Mac mini™ behind any of Premier Mounts’ CTM, PCM and
PRO Tilt Series mounts (sold separately).
Place the Mac mini™ facedown in
the slot of the Mac mini™ Mounting
Bracket.
Step 1
Front View
The Mac mini™’s DVD drive
should be accessible from
the bottom of the mounting
bracket.
• All trademarks are the property of the respective trademark owners.
If using the mounting bracket with a PRO tilt mount, the bottom tabs of
the mounting bracket should lock behind the bottom hooks of the back
plate.
9533-044-011-0X_1
/