Grundig VCP 8931 User manual

Brand: Grundig

Model: VCP 8931

Type: User manual

Grundig VCP 8931 is a 2-in-1 cordless stick vacuum cleaner combining powerful suction with the convenience of cordless cleaning. With three power levels, it adapts to your cleaning needs. Tackle hard floors with the hard floor roll or switch to the electric turbo brush for deep cleaning of carpets and rugs. The crevice tool and mini turbo brush help reach every nook and cranny, while the dust brush is ideal for delicate surfaces.

User Manual

EN - NO

2 In 1 Cordless Stick Vacuum Cleaner

VCP 8931

01M-GMS2900-1421-05

Please read this guide first!

Dear Customer,

Thank you for choosing an Grundig product. We would like you to achieve the optimal

efficiency from this high quality product which has been manufactured with state

of the art technology. Please make sure you read and understand this guide and

supplementary documentation fully before use and keep it as a reference. Include

this guide with the unit if you hand it over to someone else. Observe all warnings and

information herein and follow the instructions.

Symbols and their meanings

These symbols are used throughout this guide:

CImportant information and recommen-

dations regarding the use of the appli-

ance.

AWARNING: Warnings on personal

injury or property damage.

Electric shock protection rating

This product has been produced in environmentally-friendly, state-of-the-art facilities.

Vertical Cordless Vacuum Cleaner / User Manual 27 / EN

This section contains safety in-

structions to prevent hazards that

can result in injury or property

damage.

Any warranty is void if these in-

structions are not followed.

1.1 General safety

• This appliance complies with

international safety standards.

• This device can be used by

children over 8 years of age,

people with physical, sensory

or mental challenges or people

with lack of experience or

knowledge; as long as control

is ensured or information is

provided regarding the hazards.

Children must not play with the

appliance. Cleaning and user

maintenance shall not be carried

out by unattended children.

• Do not use the appliance if the

power cord or the appliance is

damaged. Contact authorized

service.

• Your mains power supply shall

be in align with the specified

information on the type tag.

• Do not use the appliance with

an extension cord.

• To prevent damage to the power

cord, prevent it from being

pinched, crimped or rubbed

against sharp edges.

• Do not touch the plug of the

appliance with damp or wet

hands while the appliance is

plugged in.

• Do not pull on the cord while

unplugging the appliance.

• Do not vacuum flammable

materials and ensure that the

cigarette ashes are cooled down

before vacuuming them.

• Do not vacuum water and other

fluids.

• Protect the appliance against

precipitation, humidity and heat

sources.

• Do not use the appliance in or

near explosive or flammable

environments and substances.

• Unplug the appliance before

cleaning and maintenance.

• Do not immerse the appliance

or its power cord in water for

cleaning.

1 Important safety and environmental instructions

28 / EN Vertical Cordless Vacuum Cleaner / User Manual

• Do not disassemble the

appliance.

• Use only original parts or

parts recommended by the

manufacturer.

• To prevent blockage of the filter

or damage to the motor, do

not vacuum cement, plaster or

fragments of compressed paper.

• Use the appliance with the

adapter delivered with the

appliance only.

• Do not use the appliance without

filters, it may get damaged.

• If you keep the packaging mate-

rials, keep them out of the reach

of children.

• This appliance is not intended

to be used by persons, including

children, with physical, sensory

and mental disabilities or those

who have not adequate experi-

ence and knowledge regarding

its use, unless they are under

the supervision of a person re-

sponsible for their safety or they

are informed about the opera-

tion of the appliance.

• The children shall be supervised

to prevent them from playing

with the appliance.

• Unplug the adaptor and remove

the battery pack before any

cleaning or maintenance

procedure.

• To avoid any risk of hazard,

a damaged adaptor shall be

replaced by the manufacturer,

the authorized representative of

the manufacturer or a similarly

qualified technician.

• Keep your fingers, hair and loose

clothes away from moving parts

or clearances while vacuuming.

• Batteries shall be removed from

the appliance before discarding

the appliance.

• Disconnect the appliance from

power supply before removing

the battery.

• Please discard used batteries in

accordance with local laws and

regulations.

• The batteries included in this

appliance may only be replaced

with qualified persons.

1 Important safety and environmental instructions

Vertical Cordless Vacuum Cleaner / User Manual 29 / EN

1 Important safety and environmental instructions

• WARNING: Use the

YLS0241A-E360060 removable

supply unit delivered with the

appliance to charge to the

battery.

• Please install/remove batteries

as per the instructions specified

in the user guide.

• Rechargeable batteries shall

be removed from the appliance

before recharging operation;

• Do not use batteries of different

types or old and new batteries

together.

• Batteries shall be installed with

the correct polar layout.

• Remove the depleted batteries

from the appliance and dispose

of these batteries in a safe way.

• If you do not intend to use the

appliance for a long while, the

batteries shall be removed.

• Do not short circuit the supply

terminals.

• Use with ZB1858 batteries

only.

• This appliance shall not be

operated by children and

people with limited physical,

sensory and cognitive skills or

people with lack of experience

and knowledge unless they

are under supervision or they

are provided with the relevant

instructions.

• The children shall be supervised

to prevent them from playing

with the appliance.

1.2 Compliance with the WEEE

Regulations and Waste Disposal

This product does not contain the dangerous

and prohibited materials indicated in the

“Regulation on The Control of Waste Electrical

and Electronic Equipment” published by

Ministry of Environment and Urbanisation of Republic of

Turkey. Complies WEEE Regulations. This product was

manufactured from recyclable and reusable high quality

parts and materials. Therefore, do not dispose of this

product with other domestic wastes at the end of its life

cycle. Take it to a collection point for electrical and elec-

tronic equipment. You can ask your local administration

about these collection points. You can help protect the

environment and natural resources by delivering the

used products for recycling.

30 / EN Vertical Cordless Vacuum Cleaner / User Manual

1.3 Packaging information

The product's packaging is made of recycla-

ble materials, in accordance with the National

Legislation.

Do not dispose the packaging waste with the household

waste or other wastes, dispose it to the packaging col-

lection areas specified by local authorities.

1.4 Waste batteries

Ensure that the waste batteries are disposed

of in accordance with local laws and regula-

tions. The symbol on the battery and packag-

ing indicates that the battery delivered with

the product should not be considered as

household waste. This symbol may be used in combina-

tion with a chemical symbol in some regions. If the bat-

teries contain more than 0.0005 % mercury and more

than 0.004 % of lead, the Hg chemical is added for

mercury and the Pb chemical symbol is added for lead

under the symbol. By ensuring that the batteries are dis-

posed correctly, you shall contribute to the prevention of

potential damage to the environment and human health

due to improper disposal of the batteries.

1 Important safety and environmental instructions

Vertical Cordless Vacuum Cleaner / User Manual 31 / EN

2 Overview

16 17 18 19 20 21

22 23

32 / EN Vertical Cordless Vacuum Cleaner / User Manual

The values provided with the appliance or its accompanying documents are laboratory readings in

accordance with the respective standards. These values may differ depending on the use and ambient

conditions.

2.1 Controls and components

1. On-Off switch

2. Mode button +

3. Mode button -

4. EPA E10 filtre cover release button

5. Wand release button

6. Brush release button

7. Electric turbo brush

8. Battery pack release button

9. Body of the appliance

10. Dust container

11. Dust reservoir lid opening button

12. Foldable wand button

13. Charging dock

14. Charging dock tube

15. Charging dock support

16. Hard floor roll

17. Charge adaptor

18. Elbow

19. Crevice tool

20. Mini turbo brush

21. Dust brush

22. Screw

23. Dowel

2.2 Technical data

Nominal input power: 450 W:

Input:

100 - 240 V~ 50-60 Hz 0.8 A (max.)

Output: 36 V 0.6 A

Charging period: 4-5 hours

Operation period under maximum power:

7 mins

Operation period under medium power: 22

mins

Operation period under minimum power:

45 mins

The rights to make technical and design changes

are reserved.

External Power Supply Parameter

Manufacturer:

Dongguan Yinli Electronics Co., Ltd

Model ID: YLS0241A-E360060

Input Voltage: 100-240V~

Input Frequency: 50-60Hz

Input Current: 0.8A

Output Voltage: 36.0V

Output Current: 0.6A

Output Power: 21.6 W

Average active efficiency: 87.19%

Efficiency at low load (10%): 79.58%

Power consumption under no load: 0.09 W

2 Overview

Vertical Cordless Vacuum Cleaner / User Manual 33 / EN

3 Installation

3.1 Intended use

This appliance is intended for household use and it is not suitable for industrial use.

3.2 Installation of the mobile charging dock

Install charging dock tube (15) to

the charging dock support (14),

then install the charging dock (13)

to the charging dock tube (14).

Install the thin end of the charger to

the seat on the charging dock (13).

Plug the charging adaptor (17) to

the outlet.

102-104 cm

If you want to install the charging

dock (13) to the wall, detach

the charging unit from the tube

(14) and support (15) using two

separate buttons.

Position the charging dock (13) at

a height of 102-104 cm from the

ground.

Install the end of the charging

adaptor (17) to the seat on the back

of the charging dock (13).

Secure the charging dock (13) to

the wall using two screws and two

dowels.

34 / EN Vertical Cordless Vacuum Cleaner / User Manual

3.3 Installation of the body and the brush

Install the wand to the end of the

body (9).

Remove it by pressing the release

button.

Press the electric turbo brush

release button (6) on the electric

turbo brush (7) and push it in the

direction of arrow towards the

wand.

Install the mini turbo brush (20) to

the charging dock (13).

Place other accessories to the

charging dock support (15).

3 Installation

Vertical Cordless Vacuum Cleaner / User Manual 35 / EN

4 Operation

4.1 Charging the appliance

Secure the wheels of the electric

turbo brush (7) to the clearance on

charging dock support (15).

Install the body (8) to the charging

dock (13).

Plug the charging adaptor (17) to

the outlet.

Flashing of the charge indicator

LEDs in white colour indicates that

the appliance is being charged.

– When all levels of the charge

indicator LEDs are illuminated,

this indicates that the charging of

the appliance is completed.

CIt takes up to 5 hours to charge the appliance completely. The appliance shall not be operated while

charging.

4.2 Start Up

CIt may be connected for charging before the complete discharging of the battery. The appliance may

be kept continuously as charging on the charging dock until the next operation.

ON/OFF

TURBO

Press the on/off button (1) to operate

the appliance. The appliance starts

operating with the minimum speed

when the on/off button is pressed.

Press the “+” mode button (2)

once to operate the appliance with

medium speed. Press once more to

operate it with the maximum speed.

Press the “-” mode button (3)

once to switch to a lower speed

while operating at maximum speed

or medium speed.

36 / EN Vertical Cordless Vacuum Cleaner / User Manual

CIf the appliance is placed on the charging unit while it is being operated, it shall be stopped automat-

ically.

This appliance is suitable for use on

carpets and hard floors.

Open the lock manually for

operation while the appliance is

locked as upright.

Press one of the two buttons (12)

on the wand to fold the wand. Thus,

you may reach hard-to-reach areas

such as the areas under the seats.

The appliance has a feature of standing upright thanks to the locking mechanism of the brush.

The floor shall be flat to ensure correct operation of this feature. (hard floor, hardwood, etc.) The

appliance shall be kept in the charging dock when it is not used and while it is stored. The vacuum

may be placed upright for short periods (2-3 minutes) during the cleaning thanks to the locking of

the brush. (hard floor, hardwood, etc.)

4 Operation

Pay attention to the power indicator LEDs during operation.

These indicators gradually turn off as the charge level is

reduced, and when all indicators are turned off and only one

indicator illuminates in red, then the charge of the appliance is

about to run out. The appliance stops operating automatically

after a short while when the red LED illuminates.

Vertical Cordless Vacuum Cleaner / User Manual 37 / EN

4 Operation

4.3 Accessories

You may use the accessories by installing them to the end of the body.

Crevice tool (19): Suitable

for vacuuming the rear of the

furnitures, hard to reach areas and

crevice areas.

Dust brush (21): Suitable for

vacuuming curtains, waxed

furniture and delicate and fragile

objects.

Mini turbo brush (20): Suita-

ble for vacuuming floorings, stair

steps, car interiors, sofas and seat,

etc. It is also used for vacuuming

pet hair on such surfaces.

You may use the accessories to

access hard to reach places by

installing the elbow to the end of

the body.

This accessory is suitable for use

on delicate hard floors (natural

hardwood, etc.).

38 / EN Vertical Cordless Vacuum Cleaner / User Manual

5 Cleaning and maintenance

Turn off and unplug the appliance before cleaning.

AWARNING: Never use gasoline, solvent, abrasive cleaners, metal objects or hard brushes to clean

the appliance.

AWARNING: Deformation may occur on the filters within time as a result of usage. It shall be

replaced with a new one to prevent loss of performance. Contact with the customer services to buy

a new one.

5.1 Cleaning of the dust reservoir

CWe recommend you to clean the dust reservoir (10) after each operation.

Wipe the surface of the body with a

wet cloth (9).

Press the dust reservoir lid opening

button (11) to open the dust

reservoir (10) and discharge the

dust collected inside.

Push the trigger under the appli-

ance to clean the dust reservoir

(10). Detach the dust reservoir (10)

from the body (9).

Remove the metal filter and inlet

foam inside the dust reservoir (10)

by rotating the metal filter coun-

ter-clockwise.

Remove the inlet foam inside the

metal filter.

Remove the dust on the metal filter

and inlet foam by tapping them to a

hard surface such as a waste bin or

by using a brush.

Install the inlet foam to the metal

filter.

Vertical Cordless Vacuum Cleaner / User Manual 39 / EN

Install the metal filter inside the

dust reservoir (10) by rotating it

clockwise.

While installing the metal filter and

inlet foam to the dust reservoir you

have detached them from, place

them as per the lock symbols on

the dust reservoir.

1. Wipe the body (9) with a wet

cloth.

2. Install the body (9) to the dust

reservoir (10).

5.2 Cleaning of the metal filter and inlet foam

CThe metal filter and inlet foam shall be cleaned regularly.

Remove the metal filter and inlet

foam inside the dust reservoir (10)

by rotating the metal filter counter-

clockwise.

Remove the inlet foam inside the

metal filter.

Remove the dust on the metal filter

and inlet foam by tapping them to a

hard surface such as a waste bin or

by using a brush.

5 Cleaning and maintenance

40 / EN Vertical Cordless Vacuum Cleaner / User Manual

5 Cleaning and maintenance

Install the inlet foam to the metal

filter.

Install the metal filter and inlet foam

inside the dust reservoir (10) by

rotating the metal filter clockwise.

CClean the metal filter and inlet foam by washing under running cold water once a month after removing

the dust on them.

Remove the metal filter and inlet

foam inside the dust reservoir (10)

by rotating the metal filter counter-

clockwise.

Remove the inlet foam inside the

metal filter.

Remove the dust on the metal filter

and inlet foam by tapping them to a

hard surface such as a waste bin or

by using a brush.

Vertical Cordless Vacuum Cleaner / User Manual 41 / EN

5 Cleaning and maintenance

AWARNING: Wash with cold water. Warm water deteriorates the structure of the filter.

24h

Wash the inlet foam under running

cold water and let it dry.

Install the dried inlet foam to the

metal filter.

Install the metal filter and inlet foam

inside the dust reservoir (10) by ro-

tating the metal filter clockwise.

CIt may 24 to 48 hours to dry the washed inlet foam. Reinstall it once you are sure that it is dried.

5.3 Cleaning of the EPA E10 Filter and outlet foam

CClean the EPA E10 filter and outlet foam regularly.

AWARNING: Do not wash the EPA E10 filter.

Remove the lid simultaneously

while pressing the EPA E10 filter

release button (4).

Remove the EPA E10 filter and the

outlet foam inside it.

Remove the dust on the EPA E10

filter and outlet foam by tapping

them to a hard surface such as a

waste bin or by using a brush.

42 / EN Vertical Cordless Vacuum Cleaner / User Manual

5 Cleaning and maintenance

AWARNING: Wash with cold water. Warm water deteriorates the structure of the filter.

24h

Inspect the outlet foam regularly.

Clean it by washing under running

cold water after removing the dust

on them in case of excessive dust .

Reinstall it once it is dried.

Install the EPA E10 filter and outlet

foam to the lid.

Place the lid back.

5.4 Cleaning of the brush

AWARNING: Do not wash the turbo brush (9) and the main roll brush.

To remove the electric turbo brush

(7), open the lock with the roll brush

release tab in the direction of the

arrow. (You may use a coin to open

it.)

Remove the roll brush. Remove the dust on it by tapping it

lightly to a hard surface or remove

the dust with a brush. If any hair,

etc. is tangled, remove it by cutting

it off.

Vertical Cordless Vacuum Cleaner / User Manual 43 / EN

After cleaning the roll brush,

re-install it and lock the tab.

5.5 Storage

• If you do not intend to use the appliance for a long time, store it carefully.

• Unplug the appliance.

• Ensure that the appliance is kept out of reach of children.

• If you shall not be using the battery for a long period of time, please keep it in a cool and dry place at

half charged condition. Do not charge or discharge completely.

• Store the battery on a non-conducting material, and do not allow the battery to contact metal directly.

This shall damage the battery.

5.6 Transport and shipping

• During transport and shipping, carry the appliance with its original packaging. The packaging of the

appliance will protect the appliance against physical damage.

• Do not put heavy objects on the appliance or its packaging. Otherwise the appliance may be damaged.

• If the appliance is dropped, the appliance may not operate or permanent damage may occur.

5 Cleaning and maintenance

44 / EN Vertical Cordless Vacuum Cleaner / User Manual

6 Problems and remedies

AWARNING: Check the following points before asking for repair assistance from the service

department.

PROBLEM POSSIBLE CAUSE SOLUTION

Not OK

Battery is discharged. Charge it.

Battery may be unseated. Remove the battery and

install it again.

Vacuum connection is blocked.

Separate the appliance

as body (9), brush (7) and

wand. Inspect and clean the

connection points.

Suction power is getting reduced.

Dust reservoir (10) is full. Clean the dust reservoir

(10) and the filter.

You may have reached the

cleaning period of the filters. Clean the filters.

Filters may be deformed as a

result of operation and their

replacement period may have

come.

Please contact the

customer services to buy a

new filter.

Motor inlet foam is not cleaned. Clean the filters and

recharge the appliance.

Hair and similar materials may

have tangled on the rotating roll

on the turbo brush (7). Clean the turbo brush roll.

There is disturbing noise from the

motor.

Vacuum connection is blocked.

Separate the appliance

as body (9), brush (7) and

wand. Inspect and clean the

connection points.

Something may have stuck

between the dust reservoir and

the filter.

Open the dust reservoir and

inspect the filter area.

Cannot charge the vacuum cleaner. The vacuum cleaner is not

installed to the charging dock.

Install the vacuum cleaner

to the charging dock.

Make sure that it is seated

properly. Check the

connection.

Page is loading ...

Grundig VCP 8931 User manual

Brand: Grundig

Model: VCP 8931

Type: User manual

Download PDF

report

in other languages

dansk: Grundig VCP 8931 Brugermanual

Grundig VCP 8931 User manual

Grundig VCP 8931 User manual

in other languages

Related papers

Other documents