2. aFe Power
  3. 49-46231

aFe Power 49-46231 Installation guide

  • Hello! I've reviewed the provided document, which contains installation instructions for the aFe RB 49-46231 2.5" Cat-Back exhaust system, designed for 2012-2013 Jeep Wrangler JK. The instructions cover the removal of the stock exhaust, the installation of the new Muffler Assy and Tailpipe with provided clamps and also recommendations. I am ready to answer your questions about the installation process or the system itself.
  • What vehicle models are compatible with this exhaust system?
    What is the recommended distance between the tailpipe and body panels?
    What is the recommended action after 50-100 miles of driving after installation?
49-462XX
12 Jeep Wrangler JK (4 dr)
“Rock Basher” 22” Muer (Hi-Tuck Exhaust)
INSTALLATION INSTRUCTIONS
MAKE: Jeep
MODEL: Wrangler JK
YEAR: 2012-2013
ENGINE: V6-3.6L
WHEELBASE: 116” (4 Door Only)
2.5” Cat-Back “RB”
49-46231 (409 SS)
Hi-Tuck
Band Clamp
05-41061
Band Clamp
05-41061 Muffler Assy
05-44757
Tailpipe
05-44477
Step 1: (Read Instructions prior to installation) Remove your stock exhaust from the rear of your truck working your way
forward. Take caution not to damage the factory isolation mounts as they will be reused. It may be helpful to lubricate the isolation
mounts prior to disassembly. It is recommended to not fully tighten the clamps until the entire system has been
installed.
Step 2: For faster installation spread the pieces of the exhaust along side of your vehicle according to the diagram shown.
Step 3: Install muffler assembly with 2.5” band clamp to cat-side utilizing the factory isolation mount.
Step 4: With 2.5” band clamp, install the tailpipe utilizing the factory isolation mount.
Step 5: Now tighten all clamps. Your installation is now complete. aFe recommends to re-tighten all parts after 50-100 miles.
Check periodically.
NOTES:
• aFe recommends that the tailpipe be at least 1/2”-1” away from any body panels to avoid heat related body damage. Tighten and secure.
Caution: Allow time for your vehicle to cool down prior to installation. When working on or under your vehicle proceed with caution. Exhaust systems reach high
temperatures and may cause serious burns. Wear protective safety equipment; eye goggles and gloves to ensure a safe installation. aFe recommends professional
installation on our products.
06-85865
Updated: August 2013
/