Kmart 42862550 User manual

Assembly Instructions

WARNING: DO NOT USE ON SLOPES OR UNEVEN GROUND TO AVOID ACCIDENTAL FALLS.

CHECK SCREWS AND CONNECTIONS REGULARLY TO ENSURE THAT THEY ARE TIGHTENED.

CHECK THE RUBBER TIPS ON THE LEG EXTENSIONS ARE PRESENT, AND CHECK FOR WEAR AND TEAR OR IF THEY ARE MISSING.

ALL FOUR LEG EXTENSIONS WITH RUBBER TIPS MUST TOUCH THE FLOOR SIMULTANEOUSLY AT ALL TIMES.

ADJUST BENCH LEGS AND MAKE SURE SEAT IS FLAT AND SECURE.

DO NOT STAND ON CHAIR.

FOR ONE PERSON ONLY.

MAXIMUM LOADING WEIGHT: 100kg.

Step 1:

1pcs 1pcs

1pcs

4pcs

2pcs

HAssembly

ardware list

Attach leg with the large suction cup(D) by inserting a clamp(B)

into the hole to secure the leg into place. Repeat for second leg.

Step 2:

Attach leg with the small suction cup(C) by inserting a clamp(B)

into the hole to secure the leg into place. Repeat for second leg.

Step 3:

Insert backrest tube(E & F) into base by depressing push pins and

sliding supports through both holes.

Step 5:

NOTE:

Attach armrest by depressing push pins and sliding into the arm

Step 6:

Assembled.

Make sure the arm arches outward, not inward.

NOTE:

Place legs with suction cups into bath tub when using.

receptacle on the side of the bench.

Step 4:

Turn transfer bench right-side-up. To assemble backrest, insert

backrest support into pole by depressing push pin and sliding into holes.

E F