Kmart 42862550 User manual

  • Hello! I have reviewed the user manual for the Transfer Bench. The document provides detailed assembly instructions as well as safety precautions for its proper use. I am ready to assist you with any questions you might have about setting up or using the bench.
  • Where should the transfer bench not be used?
    What should be checked regularly?
    What should be checked on the leg extensions?
    How many people can use the transfer bench at a time?
Assembly Instructions
WARNING: DO NOT USE ON SLOPES OR UNEVEN GROUND TO AVOID ACCIDENTAL FALLS.
CHECK SCREWS AND CONNECTIONS REGULARLY TO ENSURE THAT THEY ARE TIGHTENED.
CHECK THE RUBBER TIPS ON THE LEG EXTENSIONS ARE PRESENT, AND CHECK FOR WEAR AND TEAR OR IF THEY ARE MISSING.
ALL FOUR LEG EXTENSIONS WITH RUBBER TIPS MUST TOUCH THE FLOOR SIMULTANEOUSLY AT ALL TIMES.
ADJUST BENCH LEGS AND MAKE SURE SEAT IS FLAT AND SECURE.
DO NOT STAND ON CHAIR.
FOR ONE PERSON ONLY.
MAXIMUM LOADING WEIGHT: 100kg.
Step 1:
AE
F
G
H
C
D
1pcs 1pcs
1pcs
1pcs
1pcs
4pcs
2pcs
2pcs
B
HAssembly
ardware list
D
B
Attach leg with the large suction cup(D) by inserting a clamp(B)
into the hole to secure the leg into place. Repeat for second leg.
Step 2:
Attach leg with the small suction cup(C) by inserting a clamp(B)
into the hole to secure the leg into place. Repeat for second leg.
C
B
C
Step 3:
Insert backrest tube(E & F) into base by depressing push pins and
sliding supports through both holes.
Step 5:
NOTE:
Attach armrest by depressing push pins and sliding into the arm
Step 6:
Assembled.
Make sure the arm arches outward, not inward.
NOTE:
Place legs with suction cups into bath tub when using.
receptacle on the side of the bench.
Step 4:
Turn transfer bench right-side-up. To assemble backrest, insert
backrest support into pole by depressing push pin and sliding into holes.
A
E
F
F
E
E
F
H
H
A
A
G
E F
G
/