Kmart 42961420 User manual

Hello! I have reviewed the user manual for the Motion activated light, which describes a motion-activated light with a 360° rotatable design and two lighting modes: AUTO and ON. It can be mounted in several ways and also function as a flashlight. I am ready to answer any questions you might have about this product.
How does the AUTO mode work?

How can I mount the light base?

What kind of batteries are needed?

Can the light rotate?

Can I use the light as a flashlight?

42961420

Feature:

Two Lighting Modes- AUTO: Motion activated with high quality sensor when in the dark.

It will automatically turn off after about 15 seconds of no motion detected, the motion angle is 120

degrees. ON: Turn on permanently, you can remove the light and use it as a flashlight.

Wireless and removeable- You can easily mount the light base via a screw or the included adhesive pads.

Or you can just use the built-in strong magnet to attach it to a metal surface.

Battery powered light- Motion activated light is powered by 3*AAA batteries

(not included). Twist the back cover of little lights and install the 3*AAA batteries.

360° Rotatable- The motion sensor light is 360° rotatable, place the light inside the base and rotate the

motion sensor light in any direction.

Warning & Caution

Install batteries to correct polarity. Do not mix different types of new and used batteries. Dispose of

batteries responsibly. Keep out of reach of children. Installation by adult required. Keep away from fire.

User manual:

1.Mount the light base via a screw or the included adhesive pads, or use the built-

in strong magnet to attach it to the metal surface.

2.Turn the switch to “ON” ， the light could turn on permanently

3.Turn the switch to "AUTO", the light could automatically motion activated

4.Turn the switch to "OFF", the light turn off permanently.

5.Take off the light and use it as a flashlight

Made in China