-Press >3 sec. to enter clock setup, press ADJ to change
minutes, press MODE to move to hours, press ADJ to change
hours, press MODE again to exit clock setup.
- Press to change clock display to show alarm time (indicated by
the symbol). When alarm time is displayed, press MODE >3
sec. to enter alarm setup, press ADJ to change minutes, press
MODE to move to hours, press ADJ to change hours, press
MODE again to exit alarm setup.
- To turn off/on the alarm, change the press MODE to show the
alarm time, and then press ADJ. indicates the alarm is on.
9. / : Quick press switches between and . (Located Rear
Side of the Indicator)
Specifications
Indoor Temperature Range: 32 ~ 122 (0 ~ 50
Outdoor Temperature Range: -58 ~158 ~70
Humidity Range: 10%~99%
Temperature Resolution: 0.1
Humidity Resolution: 1%
Temperature Accuracy: 2°F (±1°C()
Humidity Accuracy: ±5%
Power supply: 1.5V ( AAA Battery )
Warranty Information
Triplett / Jewell Instruments extends the following warranty to the original purchaser of
these goods for use. Triplett warrants to the original purchaser for use that the products sold
by it will be free from defects in workmanship and material for a period of (1) one year from
the date of purchase. This warranty does not apply to any of our products which have been
repaired or altered by unauthorized persons in any way or purchased from unauthorized
distributors so as, in our sole judgment, to injure their stability or reliability, or which have
been subject to misuse, abuse, misapplication, negligence, accident or which have had the
serial numbers altered, defaced, or removed. Accessories, including batteries are not
covered by this warranty Copyright © 2021 Triplett
www.calcert.com sales@calcert.com1.888.610.7664 0
5
10
15
20
25
30
