Simplicity 7-GAL TANK (9000741) User manual

Type
User manual

This manual is also suitable for

Read and understand this operator's manual thoroughly before using the product. It contains important
information for your safety as well as operating and maintenance advice.
BRIGGS & STRATTON CORPORATION,
MILWAUKEE, WISCONSIN, U.S.A.
7 GAL PORTABLE
AIR TANK
Product Model # 074040-00
Manual # 80018801
Not for Reproduction
BRIGGSandSTRATTON.COM2
Thank you for purchasing this quality-built Briggs & Stratton ™ air compressor. We are pleased that
Briggs & Stratton brand. When operated and maintained
according to the instructions in this manual, your Briggs &Stratton air compressor will provide many
years of dependable service.
You can contact Briggs & Stratton™ Customer Service by phone at (800) 743-4115, or on the
Internet at BRIGGSandSTRATTON.COM.
Date Purchased
Not for Reproduction
Thank you for choosing a product from the Briggs & Stratton family of brands. We are honored that you chose
us as your power equipment provider.
WE STRIVE TO CREATE HELPFUL, DEPENDABLE PRODUCTS THAT YOU CAN RELY ON FOR YEARS TO
COME, WHILE COUNTING ON US TO SUPPORT YOU THROUGH THE LIFE OF YOUR PRODUCT.
onlineproductregistration.com or scan the code below from your mobile device.
Product updates
Helpful maintenance and usage tips
Discounts and offers on future products
product online.
Whether you absolutely love your new product or have a suggestion to enhance it, we’d love to hear from you
and value your feedback.
At your service,
David Cluka, Director of Customer Experience
Briggs & Stratton Corporation
CONGRATULATIONS ON YOUR
NEW PRODUCT PURCHASE!
SCAN THIS CODE
to start the registration process on your mobile device
. Data rates apply.
80018801
Not for Reproduction
Table of Contents
Safety Information..................................................................................................................
Product Registration Form....................................................................................................
Product Specifications..........................................................................................................
Operating Instructions..........................................................................................................
Warranty...............................................................................................................................
Key Parts Diagram................................................................................................................
4
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions.
Read all instructions and follow them with use of this product.
3
5
6
6
7
8
BRIGGSandSTRATTON.COM
Not for Reproduction
5
DO NOT OPERATE THIS UNIT UNTIL YOU READ AND UNDERSTAND THIS
INSTRUCTION MANUAL FOR SAFETY, OPERATION, AND MAINTENANCE
INSTRUCTIONS.
This air tank is designed to safely hold 125 PSI of compressed air. Over filling with air or filling with any other
gas may result in personal injury or property damage. Fill tank with air only from a low pressure compressor
or service station.
RISK OF PERSONAL INJURY. Wear safety glasses. Never spray compressed air or material at self or others.
Do not use compressed air for breathing. Keep the children away from air tank all the time.
FOR AIR ONLY. DO NOT RUT ANY OTHER GAS OR LIQUID IN THIS TANK!
Safety Information
WARNING
Not for Reproduction
6
.
BRIGGSandSTRATTON.COM
Key Parts Diagram
Product Specifications
Model No.
Air Tank Capacity
Cut-out Pressure
074040-00 / 9000741
7 Gallon
125 PSI
D. Air Hose
E. FootpadsB. Pressure Gauge
A. Air Tank
C. Pressure Relief Valve
A B C D
E
Not for Reproduction
7
Filling the Portable Air Tank
Take your portable air tank to any source of clean dry compressed air. A full service gas station or truck stop is preferable.
Modern convenience mart type filling stations do not have sufficient air pressure available to allow you to get the most
from your air tank. It is recommended that you fi ll your tank with air until the pressure gauge reads between 95 to 135 psi.
The air tank is fi lled like a car tire by pressing the chuck from the source to the fi ller valve.
PLEASE NOTE: Tank can be filled and the pressure gauge can be read with the RED ON/OFF KNOB in
the OFF position.
Using the Portable Air Tank
Turn the RED ON/OFF KNOB counter-clockwise to the open position to allow air to flow from the tank into the hose. To
prevent air from leaking out of the tank between uses, turn the RED ON/OFF KNOB clockwise to the closed position.
STORAGE
STORING YOUR PORTABLE AIR TANK
Turn the RED ON/OFF KNOB CLOCKWISE to the OFF position when storing your air tank.
WARNING
Failure to remove condensation will cause the tank to rust prematurely.
Always drain the tank of all air after the last use for the day and before repairing or removing any component parts.
Point the safety pressure relief valve AWAY FROM YOUR BODY when releasing air. Use the pull ring on the safety relief
valve to vent any pressure inside the tank before attempting to service the tank. Safety glasses must be worn at all
times for eye protection.To disperse any accumulated condensation inside the tank, begin by reducing. the air pressure
inside the tank by pulling out on the safety valve and holding until the tank gauge reaches 25 psi. Invert the tank with
the manifold facing downward and pull the ring on the safety relief valve. We as the manufacturer and you as the
consumer have no control over the moisture content of air coming from any fill source. Premature rusting caused by
condensation inside the tank is the primary reason for the suggested replacement date stamped on the tank.
• Never attempt to remove any components while tank is pressurized.
• Never remove or deface the information sticker on tank.
• Never attempt to fill the tank if any air leak is detected in the tank body. Discontinue use of the air tank immediately.
• Warranty is void if any attempt is made to alter or modify this unit in any way.
OPERATING INSTRUCTIONS
Not for Reproduction
8 BRIGGSandSTRATTON.COM
Briggs & Stratton Air Compressor Warranty Policy
This Limited warranty does not include the following:
LIMITED WARRANTY
A. Parts that are worn or broken or which have become inoperative due to abuse, misuse, accidental damage, neglect or lack of
proper installation, operation or maintenance (as outlined in the applicable owner’s manual or operating instructions) or product
that has been used for industrial, professional, commercial or rental purposes;
B. Normal wear and tear or expendable parts or accessories that may be supplied with the product which are expected to become
inoperative or unusable after a reasonable period of use;
C. Routine maintenance and consumable items such as, but not limited to fuel, lubricants, valves, belts, knobs, nuts, fluids,
tune-ups, or adjustments;
D. Damage caused by repairs made or attempted by persons not authorized by the manufacturer;
E. Product that was sold to the original purchaser as reconditioned or refurbished product (unless otherwise specified in writing);
F. Product or parts thereof if any part from another manufacturer has been installed or any repairs or alterations have been made
or attempted by unauthorized persons;
G. Normal deterioration of the exterior finish such as, but not limited to, scratches, dents, paint chips, nor any corrosion or
discoloring by heat, abrasive and chemical cleaners;
H. Component parts sold by and identified as the product of another company, which shall be covered under the other product
manufacturer’s warranty, if any.
October, 2015
These are our standard warranty terms, but occasionally there may be additional warranty coverage that was not determined at
time of publication. For a listing of current warranty terms for your air compressor, go to BRIGGSandSTRATTON.COM
BRIGGS & STRATTON is a trademark of BRIGGS & STRATTON CORPORATION and is used under license to Alton Industry
Co. Ltd®. Alton Industry Co. Ltd warrants this Briggs & Stratton brand product for a period of one year from the date of
original retail purchase against defects in materials and workmanship. Subject to the conditions and limitations described
below, if Alton Industry Co. Ltd determines this product is covered under this warranty, it will be replaced with the same
model or one of equal value or specification, at Alton Industry Co. Ltd’s option. Alton Industry Co. Ltd will bear the cost of
replacement. The purchaser must contact Alton Industry Co. Ltd® for all warranty authorizations.
There is no other express warranty. Implied warranties, including those of merchantability and fitness for a particular
purpose, are limited to one year, or to the extent permitted by law. Liability for incidental or consequential damages are
excluded to the extent exclusion is permitted by law. Some states or countries do not allow limitations on how long an
implied warrant lasts, and some states of countries do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you
may also have other rights which vary from state to state or country to country.
Save your proof of purchase receipt. If you do not provide proof of the initial purchase date at the time warranty service is
requested, the manufacturing date of the product will be used to determine the warranty period. Product registration is not
required to obtain warranty service on Briggs & Stratton products.
TM
TM
For questions about our warranty on this product, contact us at:
Alton Industry LTD. Group
1031 North Raddant Road
Batavia Illinois 60510
888-899-0146
info@altonindustries.com
www.altonindustries.com
Not for Reproduction
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Simplicity 7-GAL TANK (9000741) User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI