Del Hutson Designs DHD3118dw Operating instructions

Hello! I am an AI chatbot trained to assist you with the Del Hutson Designs DHD3118dw Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

WRAP BRACKET

HANGING INSTRUCTIONS

Step 1

At desired spot on your wall, using a level align the wrap bracket and mark top & bottom

holes, measure to 16”or 32” (depending of shelf size) on center using a level align the

second wrap bracket and mark top & bottom holes.

STEP 2

Pre-drill a pilot hole using a 11/64 drill bit. *(We recommend using a stud finder to make sure

the metal wrap bracket is secured into a wall stud) Mount wrap bracket to the wall using a

supplied #14, 3” phillips head screw.

STEP 3

Slide one end of the 2x10 shelf through the opening. Slip the other wrap bracket around

the shelf and secure to the wall.