Audio-Technica AT2041SP User guide

AT2041SP
Audio-Technica
Brand
Audio-Technica
Model
AT2041SP
Category
Microphones
Type
User guide

Audio-Technica AT2041SP is a versatile microphone designed to deliver exceptional audio quality in various applications. With its wide frequency response, switchable polar patterns, and high SPL handling capabilities, this microphone is well-suited for recording vocals, instruments, and sound effects in both studio and live settings. The AT2041SP features a rugged construction and a sleek design, making it a reliable choice for professional audio engineers and musicians alike.

Audio-Technica AT2041SP is a versatile microphone designed to deliver exceptional audio quality in various applications. With its wide frequency response, switchable polar patterns, and high SPL handling capabilities, this microphone is well-suited for recording vocals, instruments, and sound effects in both studio and live settings. The AT2041SP features a rugged construction and a sleek design, making it a reliable choice for professional audio engineers and musicians alike.

• The price/performance standard in side-address studio condenser
microphone technology
• Ideal for project/home-studio applications
• High SPL handling and wide dynamic range provide unmatched
versatility
• Custom-engineered 16 mm low-mass diaphragm provides
extended frequency response and superior transient response
• Cardioid polar pattern reduces pickup of sounds from the sides
and rear, improving isolation of desired sound source
• Pivoting, threaded stand mount attaches securely for easy and
precise placement of the microphone
The AT2020 is intended for use in applications where remote power
is available. It requires 48V DC phantom power, which may be
provided by a mixer or console, or by a separate, in-line source such
as the Audio-Technica AT8801 single-channel and CP8506 four-
channel phantom power supplies.
Output from the microphone’s XLRM-type connector is low
impedance (Lo-Z) balanced. The signal appears across Pins 2 and
3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” – positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be
wired consistently: Pin 1-to-Pin 1, etc.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 110° F (43° C) for extended periods.
Extremely high humidity should also be avoided.
270
" or more on axis
12
100
50
200
LEGEND
k
10
k
k
500
k
20
k
Frequency in Hertz
Frequency Response
dB
10
SCALE IS 5 DECIBELS PER DIVISION
Polar Pattern
Hz
200
LEGEND
kHz
5
kHz
1
kHz
8
240
180
210
300
330
0
150
120
AT2020 SPECIFICATIONS
†
ELEMENT
Fixed-charge back plate
permanently polarized condenser
POLAR PATTERN
Cardioid
FREQUENCY RESPONSE
20-20,000
Hz
OPEN CIRCUIT SENSITIVITY
–37 dB (14.1 mV) re 1V at 1 Pa*
IMPEDANCE
ohms
100
MAXIMUM INPUT SOUND LEVEL
dB SPL, 1 kHz at 1% T.H.D.
144
NOISE
1
20
dB SPL
DYNAMIC RANGE
dB, 1 kHz at Max SPL
(
typical)
124
SIGNAL-TO-NOISE RATIO
1
dB, 1 kHz at 1 Pa*
74
PHANTOM POWER
48
V DC, 2 mA typical
REQUIREMENTS
WEIGHT
12.1
)
(
less accessories)
oz (345 g
DIMENSIONS
6.38
" (162.0 mm) long,
" (52.0 mm) maximum body
2.05
diameter
OUTPUT CONNECTOR
Integral 3-pin XLRM-type
ACCESSORIES FURNISHED
Stand mount for
5
/
8
"-27 threaded
stands;
5
/
8
"-27 to
3
/
8
"-16 threaded
adapter; soft protective pouch
†
In the interest of standards development, A.T.U.S.offers full details on its test
methods to other industry professionals on request.
Pascal = 10 dynes/cm
*1
10 microbars = 94 dB SPL
=
1
Typical, A-weighted, using Audio Precision System One.
Specifications are subject to change without notice.
AT2020
CARDIOID CONDENSER MICROPHONE
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England www.audio-
technica.com
P#1423-10500 P51722-EN ©2004 Audio-Technica U.S., Inc. Printed in China
• Condenser design for studio-quality vocal and instrument
applications
• Excels in high-SPL applications
• Extended response for smooth, natural sonic characteristics
• Low-mass element for superb transient response
• Corrosion-resistant gold-plated XLRM-type connector
• Rugged design and construction for reliable performance
• Cardioid polar pattern reduces pickup of sounds from the sides
and rear, improving isolation of desired sound source
The AT2021 is intended for use in professional applications where
remote power is available. It requires 48V DC phantom power, which
may be provided by a mixer or console, or by a separate, in-line
source such as the Audio-Technica AT8801 singlechannel or
CP8506 four-channel phantom power supplies.
Output from the microphone's XLRM-type connector is low impedance
(Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is
ground (shield). Output phase is “Pin 2 hot” - positive acoustic
pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be
wired consistently: Pin 1-to-Pin 1, etc.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 110° F (43° C) for extended periods.
Extremely high humidity should also be avoided.
†
In the interest of standards development, A.T.U.S. offers full details on its test methods
to other industry professionals on request.
*1 Pascal = 10 dynes/cm
2
= 10 microbars = 94 dB SPL
1
Typical, A-weighted, using Audio Precision System One. Specifications
are subject to change without notice.
•Ideal for acoustic guitar, overheads, piano and group vocals
AT2021 SPECIFICATIONS
†
ELEMENT
Fixed-charge back plate
permanently polarized condenser
POLAR PATTERN
Cardioid
FREQUENCY RESPONSE
Hz
30-20,000
OPEN CIRCUIT SENSITIVITY
–39 dB (11.2 mV) re 1V at 1 Pa*
IMPEDANCE
ohms
250
MAXIMUM INPUT SOUND LEVEL
dB SPL, 1 kHz at 1% T.H.D.
145
NOISE
1
19
dB SPL
DYNAMIC RANGE
(
typical)
126
dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO
1
dB, 1 kHz at 1 Pa*
75
PHANT
OM POWER
V DC
48
, 2 mA typical
REQUIREMENTS
WEIGHT
2.9
)
oz (83 g
(
less accessories)
DIMENSIONS
4.00
" (101.5 mm) long,
0.83
" (21.0 mm) maximum body
diameter
OUTPUT CONNECTOR
Integral 3-pin XLRM-type
ACCESSORIES FURNISHED
Stand clamp; soft protective pouch
AT2021
SMALL-DIAPHRAGM CARDIOID
CONDENSER MICROPHONE
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England www.audio-
technica.com
P51753 ©2005 Audio-Technica U.S., Inc. Printed in China
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Audio-Technica AT2041SP User guide

AT2041SP
Audio-Technica
Brand
Audio-Technica
Model
AT2041SP
Category
Microphones
Type
User guide

Audio-Technica AT2041SP is a versatile microphone designed to deliver exceptional audio quality in various applications. With its wide frequency response, switchable polar patterns, and high SPL handling capabilities, this microphone is well-suited for recording vocals, instruments, and sound effects in both studio and live settings. The AT2041SP features a rugged construction and a sleek design, making it a reliable choice for professional audio engineers and musicians alike.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents