Pullman-Holt 45HEPA-Wet/Dry HEPA Vacuum Operating instructions

A. Remove the “SPACER” fron the carton and check for any shipping damage.

B. Unclamp the vacuum cleaner head. Lift it off and place it on a clean surface.

C. Remove the HEPA ﬁ lter from the vacuum cleaner can and place it on a clean surface.

D. Remove the hose from inside the vacuum cleaner can.

Assembly Instructions

Save for future reference

45-10P Wet/Dry HEPA

Assembly Instructions

Save for future reference

45-10P Wet/Dry Spacer HEPA

E. Take the “SPACER” and set it on top of the vacuum cleaner can. Clamp it to the can.

F. Place the HEPA ﬁ lter in the top of the “SPACER”.

G. Put the vacuum cleaner head on top of the “SPACER” and clamp.

B704077

09/12

CAUTION

Attach screws to ﬂ oat cage!