Groupe Brandt DOE505BE1 Owner's manual

Category
Ovens
Type
Owner's manual

This manual is also suitable for

DOE505*
DOC505*
FR
Le guide d’utilisation de votre four
User Manual for Your Oven
Betriebsanleitung des Backofens
Gebruikshandleiding van uw oven
Betjeningsvejledning for ovn
Guía de utilización de su horno
O guia de utilização do seu forno
GB
DE
NL
DK
ES
PT
99635881_ML_A DOE505.qxd 07/02/05 13:59 Page 1
2
Tout au long de la notice, vous signale les consignes de sécurité,
vous signale les conseils et les astuces
Edito P.3
Comment se présente votre four ?
Descriptif de l’appareil P.4
Accessoires P.5
Conseils de sécurité P.6
Comment installer votre four ?
Raccordement électrique P.7
Changement du câble d’alimentation P.8
Dimensions utiles pour encastrer votre four P.9
Comment utiliser votre four ?
Le détail de votre programmateur P.10
Comment mettre à l’heure l’horloge du four ? P.11
Comment faire une cuisson immédiate ? P.12
Comment programmer une cuisson ? P.13-14
Comment utiliser le minuteur ? P.15
Modes de cuisson du four P.16-17
Comment entretenir votre four ? P.18
Comment changer l’ampoule ? P.19
Que faire en cas d’anomalies de fonctionnement P.19
Qui contacter ? P.20
Sommaire
99635881_ML_A DOE505.qxd 07/02/05 13:59 Page 2
5
Accessoires
AR
AV
Grille sécurité anti basculement
cambrée
Même utilisation que la grille plate.
Sa forme est étudiée pour vous permettre de
positionner votre plat entre 2 niveaux de gradin.
A n'utiliser que sur la grande cavité.
Plat creux + grille
(
lèchefrite)
Inséré sous la grille, il recueille les jus et les
graisses des grillades. Il peut aussi être utilisé
à demi rempli d'eau pour des cuissons au bain-
marie.Evitez de poser directement dans ce plat
des rôtis ou des viandes car vous aurez auto-
matiquement d'importantes projections sur les parois du four.
FR
99635881_ML_A DOE505.qxd 07/02/05 13:59 Page 5
10
Comment utiliser votre four ?
SET
SET
1. L
e détail de votre programmateur
Affichage des températures, temps, durées et minuteur
Indicateur d’affichage de la température
Indicateur d’affichage de la durée de cuisson
Indicateur d’affichage de la fin de cuisson
Indicateur d’affichage du minuteur indépendant
Touche d’accès aux différents programmes de réglage
1
3
4
5
6
2
6
2
3
4
5
1
99635881_ML_A DOE505.qxd 07/02/05 13:59 Page 10
11
Comment utiliser votre four ?
a) A la mise sous tension
• L’afficheur clignote à 12h.
• Réglez l’heure à l’aide du sélecteur de réglage
+ ou - (le maintien sur + ou - permet d’obtenir
un défilement rapide).
• Appuyez sur la touche SET pour valider.
Exemple:12h30.
b) Remise à l’heure de l’horloge
• Restez appuyer quelques secondes sur SET,
000 apparait et en continuant à appuyer, l’heure
apparait en clignotant.
Ajustez le réglage de l’heure avec le sélecteur de
réglage ( + ou ).
• Appuyez sur la touche SET pour valider.
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
2. Comment mettre à l'heure l’horloge du four ?
S’il n’y a pas de validation par la touche SET, l’enregistrement
est automatique au bout de quelques secondes.
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
FR
SET
SET
99635881_ML_A DOE505.qxd 07/02/05 13:59 Page 11
21
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 21
22
Throughout the manual, indicates safety recommendations,
indicates advice and tips
Introduction p. 23
What does your oven look like?
Description of the appliance p. 24
Accessories p. 25
Safety recommendations p. 26
How do you install your oven?
Electrical connection p. 27
Changing the power cable p. 28
Useful dimensions for installing your oven p. 29
How does your oven work?
Close-up of your analog programmer p. 30
How do you set the oven clock? p. 31
How do you program for immediate cooking? p. 32
How do you set a cooking programme? pp. 33-34
How does the timer work? p. 35
How do you change the lamp? p. 35
Oven cooking functions pp. 36-37
How do you care for your oven? pp. 38
What to do in case of operating malfunctions p. 39
Table of Contents
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 22
23
GB
Introduction
Dear Customer,
You have just acquired a DE DIETRICH oven and we would like to thank you.
Our research teams have created a new generation of appliances for you.
Their quality, design and technological advances make them exceptional prod-
ucts and reveal our unique know-how.
With modern, refined lines, your new DE DIETRICH oven blends harmoniously
into your kitchen and perfectly combines technological expertise, cooking per-
formance and aesthetic luxury.
In the line of DE DIETRICH products, you will also find a wide range of hobs,
ventilation hoods, dishwashers, microwave ovens and refrigerators, all of
which can be built in and all of which can be coordinated with your new DE
DIETRICH oven.
Thanks to these "New Items of Value" that serve as guideposts in our every-
day lives, DE DIETRICH, the reference of excellence, is truly an invitation to a
new art of living.
The DE DIETRICH brand.
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 23
SETSET
5
3
1
24
What does your oven look like?
1
2 5
3
4
Temperature setting
Analog programmer
Function selector
Lamp
Shelf support indicator
DESCRIPTION OF THE APPLIANCE
1
2 3
4
5
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 24
25
GB
Curved anti-tipping safety grid
Same use as the flat grid
Its shape was designed to allow you to position your
dish between two shelf support levels.
Hollow dish + grid (drip tray)
Inserted under the grid, it catches barbecue juices
and grease. It can also be used half-full of water for
double-boiler cooking methods. Avoid placing roasts
or meats directly in the dish because you are certain
to have major spattering on the oven walls.
Accessories
Rear
Front
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 25
26
Safety Recommendations
Please become familiar with these recommendations before installing
and using your oven. This oven was designed for use by private persons in their
homes. It is intended solely for cooking foodstuffs. This oven does not contain any
asbestos-based components.
FIRST USE:
Before using your oven for the first time, heat it up while empty with the door
closed for approximately 15 minutes using the maximum setting in order to "cure"
the appliance. The rock wool that surrounds the oven cavity may initially release
a particular odour caused by its composition. Similarly, you may notice the release
of some smoke. All of this is normal.
SUBSEQUENT USES:
- Ensure that the door of your oven is completely closed so that the seal can
properly do its job.
- Do not let anyone lean against or sit on the oven door when it is open.
- When using the grill with the door semi-open, exposed parts and
surfaces may become hot. Keep small children away.
- When in use, the appliance becomes hot. Be careful not to touch the heat-
ing elements located inside the oven.
- After cooking, do not use bare hands to touch the dishes or accessories
(grid, turnspit, drip tray, turnspit support, etc.); use a potholder or heat-resistant
material.
- Do not line your oven with sheets of aluminium. Otherwise, the result
could be an accumulation of heat that could have an undesirable effect on cook-
ing and roasting results and could damage the enamel.
The oven must be turned off for all attempts to clean the cavity.
- During cleaning, the exposed surfaces become hotter than during
normal use. It is advisable to keep small children at bay.
You absolutely must return the function selector to 0 to reuse
your oven.
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 26
27
GB
H
ow do you install your oven?
Monophase 20A Counter
220-240 V ~ 50 Hz
Two-prong receptacle
+ ground lead
CEI standard 60083
Monophase line 220-240 V ~
Electrical connection
Power cable
approximately
1.5 m in length
16A fuse or differential
circuit breaker
Before making the connection, ensure that the wires in your
electrical set-up have enough cross-sectional area to properly
supply electricity to the appliance.
The fuse in your set-up must be 16 amperes.
The electrical connection should be performed before the appliance is installed in
the cabinet.
The oven must be connected with a power cable (standardized) with three
1.5 mm² conductors (1 ph +1 N + ground) that must be connected to a
monophase 220-240 V network via a CEI 60083 standardized receptacle (1 ph
+1 N + ground lead) or in accordance with installation rules. The safety wire
(green-yellow) is connected to the appliance's terminal and must be connected
to the ground lead of the electrical set-up.
In the case of connections with an electric receptacle, it must remain accessible
after installation of the appliance.
The oven's neutral conductor (blue wire) must be connected to the network's
neutral conductor.
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 27
28
• The power cable (H05 RR-F, H05 RN-F or H05 VV-F) must be of sufficient length to
be connected to the build-in oven while it sits on the floor in front of the cabinet.
To do this the appliance must be disconnected from the electrical network:
• Open the inspection flap located at the lower right of the back cover by
unscrewing the two screws, then pivot the inspection flap.
• Strip 12 mm along each wire of the new power cable.
• Carefully twist together the strands.
• Loosen the screws from the terminal board and remove the power cord to be
replaced.
• Introduce the power cable through the side of the cover in the cable clip located
to the right of the terminal board.
• Connect the cable wires in accordance with the written markings on the terminal
board.
• All the strands of the electricity wires must be captured under the screws.
• The phase wire on the L terminal.
• The green-yellow coloured ground wire should be connected to the terminal .
• The neutral conductor (blue) on the N terminal.
• Screw down tightly the screws on the terminal board and check the connection
by pulling on each wire.
• Attach the cable with the cable clip located to the right of the terminal board.
• Close the inspection flap using the two screws.
Changing the power cable
We cannot be held responsible for any accident resulting from
an inexistent, defective or incorrect ground lead.
How do you install your oven?
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 28
29
GB
How do you install your oven?
To be certain that you have a proper installation, do not hesitate
to call on a household appliance specialist.
Useful dimensions for installing your oven
The oven can be installed under a worktop or in a column of cabinetry
(open* or closed) having the appropriate dimensions for built-in installa-
tion (see adjacent diagram).
Your oven has optimised air circulation that allows it to achieve remarkable cooking
and cleaning results if the following guidelines are respected:
Centre the oven in the cabinet so as to guarantee a minimum distance of 5 mm
between the appliance and the neighbouring cabinet.
The material of the built-in cabinetry must be heat resistant (or be covered with
such a material).
For greater stability, attach the oven in the cabinet with two screws through the
holes provided for this purpose on either side of the front inner panel (see diagram).
To do this:
1) Remove the rubber screw covers to access the mounting holes.
2) Drill a Ø 3 mm hole in the cabinet panel to avoid splitting the wood.
3) Attach the oven with the two screws.
4) Replace the rubber screw covers (they also serve to absorb the shock caused by
closing the oven door).
(*) If the cabinet is open, its opening must be 70 mm (maximum).
70
550
Location of
attachment
screw
Location of
attachment
screw
50mm x 50mm cut-out
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 29
30
How does your oven work?
1. Close-up of your analog programmer
Display for temperatures, times, cooking times and timer
Temperature display indicator
Cooking time display indicator
End of cooking display indicator
Independent timer display indicator
Touch control for accessing various time setting programmes
1
3
4
5
6
2
SET
SET
6
2
3
4
5
1
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 30
31
GB
a) When supplied with electricity
The display flashes.
• Set the time by turning the + or selector (contin-
ual turning of the + or selector allows for rapid
number advancement)
Press the SET touch control to enter.
Example: 12:30.
b) Resetting the clock time
• Press SET for a few seconds then release.
The display flashes.
• Adjust the time with the selector (+ or ).
Press the SET touch control to enter.
2.
How do you set the oven clock?
If the SET touch control is not pressed, the adjustment
will be automatically recorded after a few seconds.
How does your oven work?
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 31
32
How does your oven work?
3.
How do you program for immediate cooking?
The analog programmer should display only the time; it should not be flashing.
Choose the cooking mode:
Turn the function selector to the position of your
choice.
Example: position " "-> the oven turns on.
Your oven recommends the most commonly used tem-
perature.
Place your dish in the oven based on the recommen-
dations provided by the cookbook.
It is, however, possible to adjust the temperature by turn-
ing the selector toward + or .
Example " " set to 210°.
After these steps, the oven begins to heat up and the display alternates between
the temperature in the oven and the temperature selected.
A series of beeps will be emitted when the oven reaches the selected tempera-
ture.
Once this temperature is reached, it remains on the display.
After a cooking cycle, the circulating fan continues to function for a
period in order to cool the oven.
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 32
33
GB
How does your oven work?
4. How do you set a cooking programme?
a) With immediate start
1. Set the desired cooking mode and adjust the tempera-
ture if necessary.
Example: position “
Temperature 200°C.
2. Press the SET touch control until the cooking time indi-
cator flashes “ ”.
The display flashes 0:00 to indicate that you can now
adjust the setting.
3. Turn the + or - selector to set the desired time.
Example: 25 min cooking time.
The cooking time is automatically recorded after a few sec-
onds -> the display no longer flashes and returns to tem-
perature display mode.
The countdown of the length of time begins immediately
after it has been set.
After these three steps, the oven heats up:
A series of beeps will be emitted when the oven reaches the selected temperature.
At the end of cooking (end of programmed time),
- the oven stops
- the cooking time indicator turns off
- 0:00 is displayed
- a series of beeps is emitted for a few minutes.
The beeping sound stops definitively when the function selector is reset to 0.
After a cooking cycle, the circulating fan continues to function for a
period in order to cool the oven.
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 33
34
How does your oven work?
b) With delayed start (choose end time)
Proceed as with programmed cooking.
After setting the cooking time,
Press the SET touch control until the end of cooking
indicator flashes “ ”.
The display flashes 0:00 to indicate that you can now
adjust the setting.
Turn the + or selector to set the desired cooking
end time.
Example: End of cooking at 13:00.
After these steps, the oven heating is delayed so that
cooking ends at 13:00.
At the end of cooking (end of programmed time),
- The oven stops
- The cooking time indicator turns off
- 0:00 is displayed
- A series of beeps is emitted for a few minutes.
The beeping sound stops definitively when the function selector is reset to 0.
After a cooking cycle, the circulating fan continues to function for a
period in order to cool the oven.
In the case of pre-programmed cooking the oven cavity is lit until cooking begins
and once cooking is finished.
In the case of pre-programmed, fan-assisted cooking, if the function selector is not
reset to 0, the fan continues to operate in order to even out the temperature in
the oven.
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
99635881_ML_A DOE505.qxd 07/02/05 14:00 Page 34
35
GB
5. How do you use the timer?
Your oven is equipped with an electronic timer that is independent of the
oven functions, making it possible to measure times.
In this case, the timer display takes priority over the time
of day and temperature display.
Press the SET touch control until the timer indicator
flashes -> the display flashes.
Turn the selector (+ or ) until the desired time is
displayed (60 minutes maximum).
The display stops flashing after a few seconds or after the
SET touch control is pressed and the timer starts working,
counting down the time in seconds.
Once the time has expired, the timer emits a series of
beeps to notify you.
It is possible to change or cancel the timer programme at any
time.
• The lamp is located on the ceiling of your oven's cavity.
a) Unscrew the view port (see adjacent
diagram).
b) Unscrew the lamp in the same direction.
Lamp specifications:
- 15 W
- 220-240 V
- 300°C
- E 14 cap
c) Replace the lamp then reposition the
view port and reconnect your oven.
How do you change the lamp?
Lamp
Unscrew
View port
To unscrew the view port and the lamp, use a rubber glove,
which will make disassembly easier.
Disconnect your oven before performing any task on the lamp
to avoid the risk of electric shock and, if necessary, let the
appliance cool down.
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
99635881_ML_A DOE505.qxd 07/02/05 14:01 Page 35
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132

Groupe Brandt DOE505BE1 Owner's manual

Category
Ovens
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI