Automation Direct NITRA PNEUMATICS Setup Instructions

Brand
Automation Direct
Model
NITRA PNEUMATICS
Type
Setup Instructions
DIN CONNECTOR
SCREW
THUMB SCREW
COIL
AVS VALV
E
DIN CONNECTOR TO
COIL GASKET
DIN CONNECTOR
1. REMOVE DIN CONNECTOR SCREW,
DIN CONNECTOR, GAKSET, AND
THUMB SCREW. SLIDE COIL AWAY
FROM VALVE.
2. ASSEMBLE VALVES ONTO MANIFOLD.
USE GASKETS, SCREWS, AND SPLIT
WASHERS SUPPLIED WITH MANIFOLD.
TORQUE RETAINING SCREWS 9-18 IN-LBS.
MANIFOLD
GASKET
RETAINING
SCREW
Control Distribution Blocks
Setup Instructions
DIN CONNECTOR
SCREW
THUMB SCREW
COIL
AVS VALV
E
DIN CONNECTOR TO
COIL GASKET
DIN CONNECTOR
1. REMOVE DIN CONNECTOR SCREW,
DIN CONNECTOR, GAKSET, AND
THUMB SCREW. SLIDE COIL AWAY
FROM VALVE.
2. ASSEMBLE VALVES ONTO MANIFOLD.
USE GASKETS, SCREWS, AND SPLIT
WASHERS SUPPLIED WITH MANIFOLD.
TORQUE RETAINING SCREWS 9-18 IN-LBS.
MANIFOLD
GASKET
RETAINING
SCREW
Control Distribution Blocks
Setup Instructions
  • Page 1 1
  • Page 2 2

Automation Direct NITRA PNEUMATICS Setup Instructions

Brand
Automation Direct
Model
NITRA PNEUMATICS
Type
Setup Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents