Pioneer VSX-LX103 User manual

Front Panel≫ Rear Panel≫ Remote≫

En

Table of contents

Connections

- Connecting Speakers

Playback

Setup

Troubleshooting

Appendix

AV RECEIVER

Instruction

Manual

VSX-LX103

Supplementary Information

≫

2

Contents

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

What’s in the box 5

Part Names 6

Front Panel 6

Display 8

Rear Panel 9

Remote Controller 11

Connections

Connecting speakers 13

Speaker Installation 14

Speaker Connections and “Speaker Setup” Settings 20

Speaker combinations 29

Connecting the TV 30

To ARC TV 31

To Non-ARC TV 32

Connecting Playback Devices 33

Connecting an AV Component with HDMI Jack

Mounted 33

Connecting an AV Component without HDMI Jack

Mounted 34

Connecting an Audio Component 35

Connecting an AV Component in a Separate Room

(Multi-zone Connection) 36

Connecting a Pre-main Amplier (ZONE 2) 36

Connecting Antennas 37

Network Connection 38

Connecting External Control Devices 39

IR IN port 39

12V TRIGGER OUT jack 40

Connecting the Power Cord 41

Playback

AV Component Playback 43

Basic Operations 43

BLUETOOTH

®

Playback 44

Basic Operations 44

Internet Radio 45

Playing Back 45

Spotify 47

Playing Back 47

AirPlay

®

48

Basic Operations 48

DTS Play-Fi

®

49

Playing Back 49

FlareConnect

TM

50

Playing Back 50

USB Storage Device 51

3

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Basic Operations 51

Device and Supported Format 53

Playing back les on a PC and NAS (Music Server) 54

Windows Media

®

Player settings 54

Playing Back 55

Supported Audio Formats 58

Play Queue 59

Initial Setup 59

Adding Play Queue Information 59

Sort and Delete 60

Playing Back 60

Listening To the AM/FM Radio 61

Tuning into a Radio Station 61

Presetting a Radio Station 63

Multi-zone 65

Switch remote control mode 65

Playing Back 66

Listening Mode 67

Selecting a Listening mode 67

Listening Mode Eects 70

Selectable listening modes 73

Setup

System Setup 79

Menu list 79

Menu operations 81

Input/Output Assign 82

Speaker 85

Audio Adjust 89

Source 90

Hardware 92

Multi Zone 96

Miscellaneous 97

MCACC 98

Menu operations 98

Full Auto MCACC 99

Manual MCACC 100

MCACC Data Check 102

Network/Bluetooth 103

Menu operations 103

Network 104

Bluetooth 105

AV Adjust 107

Menu operations 107

4

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Web Setup 109

Menu operations 109

Firmware Update 110

Updating Function on This Unit 110

Updating the Firmware via Network 111

Updating via USB 113

Initial Setup with Auto Start-up Wizard 115

Operations 115

Troubleshooting

When the unit is operating erratically 119

Troubleshooting 120

Appendix

About HDMI 129

General Specications 131

5

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

What’s in the box

1. Main unit (1)

2. Remote controller (RC-957R) (1), Batteries (AAA/R03) (2)

3. Speaker setup microphone (1)

• Used during Initial Setup.

4. Indoor FM antenna (1)

5. AM loop antenna (1)

6. Power cord (1)

• Quick Start Guide (1)

* This document is an online instruction manual. It is not included as an

accessory.

• Connect speakers with an impedance of 4 Ω to 16 Ω.

• The power cord must be connected only after all other connections are

completed.

• We will not accept any responsibility for damage arising from the connection

with equipment manufactured by other companies.

• Network services and content that can be used may no longer be available

if new functions are added by updating rmware or the service providers

terminate their services. Also, available services may dier depending on your

area.

• Details on the rmware update will be posted on our website and through

other means at a later date.

• Specications and appearance are subject to change without prior notice.

1

32

54

6

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Front Panel≫ Rear Panel≫ Remote≫

Part Names

Front Panel

❏ For details, see ( p7)

7

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Front Panel≫ Rear Panel≫ Remote≫

1. INPUT SELECTOR dial: Switch the input to be played.

2. MCACC indicator: This lights when you have enabled the speaker calibration

made with MCACC. ( p99, 116)

3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to

turn the display o.

4. DIMMER button: You can switch the display o or adjust the brightness of the

display in three steps.

5. ZONE 2-ON/OFF button: Switches the multi-zone function on/o. ( p66)

6. ZONE 2-CONTROL button: Controls the multi-zone function. ( p66)

7. HOME MENU button: Displays the Home. ( p81, 98, 103)

8. Display ( p8)

9. Cursor buttons ( / / / ) and ENTER button: Select the item with the

cursors and press ENTER to conrm. Use them to tune to stations when using

TUNER. ( p61)

10.

NETWORK indicator: This lights when "NET" is selected with the input selector

and the unit is connected to the network. If the unit is in standby mode, this

lights when functions such as HDMI CEC and network standby are enabled. It

does not light when ZONE 2 is on, however.

11.

WIRELESS indicator: Lights when the unit is connected to the wireless

network and when connected to a BLUETOOTH enabled device.

12.

Remote control sensor: Receives signals from the remote controller.

• The signal range of the remote controller is within about 16´/5 m, at an

angle of 20° on the perpendicular axis and 30° to either side.

13.

RETURN button: Returns the display to the previous state.

14.

MASTER VOLUME

15.

STANDBY/ON button

16.

PHONES jack: Headphones with a standard plug (Ø1/4"/6.3 mm) are

connected.

17.

MCACC SETUP MIC jack: The supplied speaker setup microphone is

connected.( p99, 116)

18.

Listening mode button: Press "AUTO/DIRECT", "SURROUND" or "STEREO"

to switch the listening mode. ( p67)

19.

SOUND RETRIEVER button: Turns on/o the Sound Retriever function that

provides better sound quality for compressed audio.

20.

PURE DIRECT button: Switches to the Pure Direct mode. ( p67)

21.

USB port: A USB storage device is connected so that music les stored in it

can be played. ( p51) You can also supply power (5 V/500 mA) to USB

devices with a USB cable.

22.

AUX INPUT jack: Connect a mobile music player, etc. using a stereo mini plug

cable (φ1/8″/3.5 mm).

8

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Display

256

43

1

789

1. This may light when performing operations with the "NET", "USB" input

selector.

2. Lights in the following conditions.

Z2: ZONE 2 is on.

: Connected by BLUETOOTH.

: Connected by Wi-Fi.

NET: Lights when connected to the network with the “NET” input selector. It

will blink if incorrectly connected to the network.

USB: Lights when the "USB" input selector is selected, a USB device is

connected and the USB input is selected. It will blink if the USB device is not

properly connected.

HDMI: HDMI signals are input and the HDMI input is selected.

DIGITAL: Digital signals are input and the digital input is selected.

3. Lights according to the type of input digital audio signal and the listening

mode.

4. Lights in the following conditions.

TUNED: Receiving AM/FM radio.

STEREO: Receiving FM stereo.

SLEEP: Sleep timer is set. ( p93)

AUTO STBY: Auto Standby is set. ( p93)

5. Lights when headphones are connected.

6. Blinks when muting is on.

7. Displays various information of the input signals.

8. Lights when adjusting the volume.

9. Speaker/Channel display: Displays the output channel that corresponds to the

selected listening mode.

9

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Front Panel≫ Rear Panel≫ Remote≫

Rear Panel

❏ For details, see ( p10)

180°

90°

10

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Front Panel≫ Rear Panel≫ Remote≫

1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component

digital audio signals with a digital optical cable or digital coaxial cable.

2. ANTENNA AM LOOP/FM UNBAL 75Ω terminal: The supplied antennas are

connected.

3. VIDEO IN jacks: Input the AV component video signals with an analog video

cable.

4. USB port: A USB storage device is connected so that music les stored in it

can be played. ( p51) You can also supply power (5 V/500 mA) to USB

devices with a USB cable.

5. COMPONENT VIDEO IN jacks: Input the AV component video signals with a

component video cable. (Compatible only with 480i or 576i resolution.)

6. NETWORK port: Connect to the network with a LAN cable.

7. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH

enabled device. Adjust their angles according to the connection status.

8. HDMI OUT jacks: Transmit video signals and audio signals with a HDMI cable

connected to a TV.

9. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable

connected to an AV component.

10.

RS-232C port: Connect a home control system equipped with an RS-232C

port. For adopting a home control system, contact the specialized stores.

11.

AC IN: The supplied power cord is connected.

12.

SIGNAL GND terminal: The ground wire of the turntable is connected.

13.

AUDIO IN jacks: Input AV component audio signal with an analog audio cable.

14.

SPEAKERS terminals: Connect speakers with speaker cables. (North

American models support banana plugs.)

15.

ZONE 2 PRE/LINE OUT jacks: Output audio signals with an analog audio

cable to a premain amplier or a power amplier in a separate room (ZONE 2).

16.

SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a

subwoofer cable. Up to two powered subwoofers can be connected. The same

signal is output from each of the SUBWOOFER PRE OUT jacks.

17.

IR IN port: Connect a remote control receiver unit. ( p39)

18.

12V TRIGGER OUT jack: Connect a device equipped with a 12V trigger input

jack to enable power link operation between the device and this unit.

( p40)

11

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Front Panel≫ Rear Panel≫ Remote≫

Remote Controller

1. STANDBY/ON button

2. Input selector buttons: Switches the input to be played.

3. / buttons: Select the input to be played.

4. (AV ADJUST) button: Settings such as "Tone" and "Level" can be made

quickly during play on the TV screen. ( p107)

5. Cursor buttons and ENTER button: Select the item with the cursors and press

ENTER to conrm your selection. When the folder or le lists are not shown on

one screen on the TV, press / to change the screen.

6. button: Displays the Home. ( p81, 98, 103)

7. Volume buttons

8. button: Temporarily mutes audio. Press again to cancel muting.

9. LISTENING MODE buttons: Allows you to select the listening mode.

( p67)

MAIN/ZONE 2 buttons: Controls the multi-zone function. ( p65) (The

ZONE 3 button is not used with this unit.)

10.

Play buttons: Used for play operations when playing Music Server ( p54)

or USB ( p51).

11.

button: Used for repeat or random play operations when playing Music

Server ( p54) or USB ( p51). Each time you press the button, the

mode switches from (1-track repeat), to (folder repeat), to (random).

CLEAR button: Deletes all characters you have entered when entering text on

the TV screen.

12.

button: Switches the information on the display.

13.

button: Returns the display to the previous state.

14.

MODE button: Used to switch between automatic tuning and manual tuning for

AM/FM stations ( p61), or operate the multi-zone function ( p65).

15.

+Fav button: Used to register AM/FM radio stations. ( p63)

Tips

When the remote controller isn't working: The

remote controller may have switched to the mode

for controlling ZONE 2. While holding down MODE,

press MAIN for 3 seconds or more until the remote

indicator ashes once to switch it to the mode to

control the main room.

9

bk

bl

1

2

4

3

6

8

7

5

bn

bm

bp

bo

12

Connections

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Connections

Connecting speakers 13

Connecting the TV 30

Connecting Playback Devices 33

Connecting an AV Component in a Separate Room

(Multi-zone Connection) 36

Connecting Antennas 37

Network Connection 38

Connecting External Control Devices 39

Connecting the Power Cord 41

13

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Connecting speakers

You can select the layout of speakers to be installed from various patterns when using this unit. Use the following ow chart to select the speaker layout that suits your

speakers and usage environment. You can check the connection method and default settings. Dolby Atmos ( p70) listening mode faithfully reproduces the sound

design recorded in the Dolby Atmos audio format by installing Surround Back Speakers or Height Speakers. Dolby Atmos enables the accurate placement of sound

objects that have independent motion in a three-dimensional space with even greater clarity.

Yes No

Do you enjoy sound with Dolby Atmos?

 When using Surround Back Speakers

• 7.1 Channel System (

p25)

• 7.1 Channel System + ZONE SPEAKER ( p26)

 When using Height Speakers

• 5.1.2 Channel System (

p27)

• 5.1.2 Channel System + ZONE SPEAKER ( p28)

• 5.1 Channel System ( p22)

• 5.1 Channel System + ZONE SPEAKER ( p23)

• 5.1 Channel System (Bi-Amping the Speakers)

( p24)

14

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Speaker Installation

 5.1 Channel System

*1

*2

12

45

3

6

*1: 22° to 30°, *2: 120°

This is a basic 5.1 Channel System. Front speakers output the front stereo

sound, and a center speaker outputs the sound of the center of the screen, such

as dialogs and vocals. Surround speakers create the back sound eld. Powered

subwoofer reproduces the bass sound, and creates the rich sound eld.

The front speakers should be positioned at ear height while the surround

speakers should be positioned just above ear height. The center speaker

should be set up facing the listening position at an angle. Placing the powered

subwoofer between the center speaker and the front speaker gives you a natural

sound even when playing music sources.

1,2 Front Speakers

3 Center Speaker

4,5 Surround Speakers

6 Powered Subwoofer

15

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

 7.1 Channel System

*1

*2

*3

12

54

87

3

6

*1: 22° to 30°, *2: 90° to 110°, *3: 135° to 150°

This is a 7.1 Channel System that consists of the basic 5.1 Channel System

( p14) and added surround back speakers. Front speakers output the

front stereo sound, and a center speaker outputs the sound of the center of the

screen, such as dialogs and vocals. Surround speakers create the back sound

eld. Powered subwoofer reproduces the bass sound, and creates the rich

sound eld. Surround back speakers improves the sense of envelopment and

connectivity of sound in the back sound eld, and provides a more real sound

eld. Furthermore, by installing surround back speakers, when the input format is

Dolby Atmos, you can select the Dolby Atmos listening mode which realizes the

most up-to-date 3D sound,

The front speakers should be positioned at ear height while the surround

speakers should be positioned just above ear height. The center speaker

should be set up facing the listening position at an angle. Placing the powered

subwoofer between the center speaker and the front speaker gives you a natural

sound even when playing music sources. The surround back speakers should be

positioned at ear height.

• If surround back speakers are installed, be sure to install surround speakers

as well.

1,2 Front Speakers

3 Center Speaker

4,5 Surround Speakers

6 Powered Subwoofer

7,8 Surround Back Speakers

16

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

 5.1.2 Channel System

A 5.1.2 Channel System is a speaker layout consisting of the basic 5.1 Channel System ( p14) and added height speakers. Select the height speakers that suit

your speakers and usage environment from the following three types.

❏ Front High Speakers/Rear High Speakers

Installation Example ( p17)

❏ Ceiling Speakers Installation Example

( p18)

❏ Dolby Enabled Speakers (Dolby Speakers)

Installation Example ( p19)

17

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

❏ Front High Speakers/Rear High Speakers

Installation Example

*1

*2

78

*1: 22° to 30°, *2: 120°

3´ (0.9 m)

or more

3´ (0.9 m)

or more

This is a system with the basic 5.1 channel system ( p14) consisting of front

speakers, a center speaker, surround speakers and a powered subwoofer, and

added front high speakers or rear high speakers combined. By installing such

height speakers, when the input format is Dolby Atmos, you can select the Dolby

Atmos listening mode which realizes the most up-to-date 3D sound including

overhead sound. Front high speakers or rear high speakers should be installed at

least 3´/0.9 m higher than the front speakers.

Front high speakers should be installed directly above the front speakers, and the

distance between the rear high speakers should match the distance between the

front speakers. In both cases, the speakers should be set up facing the listening

position at an angle.

7,8 Height Speakers

Choose one of the following:

• Front High Speakers

• Rear High Speakers

18

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

❏ Ceiling Speakers Installation Example

*1

*2

*3

7

888

77

*1: 30° to 55°, *2: 65° to 100°, *3: 125° to 150°

This is a system with the basic 5.1 channel system ( p14) consisting of front

speakers, a center speaker, surround speakers and a powered subwoofer, and

added top front speakers or top middle speakers or top rear speakers combined.

By installing such height speakers, when the input format is Dolby Atmos, you

can select the Dolby Atmos listening mode which realizes the most up-to-date

3D sound including overhead sound. Install the top front speakers on the ceiling

anterior to the seating position, top middle speakers on the ceiling directly above

the seating position, and top rear speakers on the ceiling posterior to the seating

position. The distance between each pair should match the distance between the

front speakers.

• Dolby Laboratories recommends the setups of these types of height speakers

to obtain the best Dolby Atmos eect.

7,8 Height Speakers

Choose one of the following:

• Top Front Speakers

• Top Middle Speakers

• Top Rear Speakers

19

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

❏ Dolby Enabled Speakers (Dolby Speakers)

Installation Example

*1

*2

78

*1: 22° to 30°, *2: 120°

This is a system with the basic 5.1 channel system ( p14) consisting of front

speakers, a center speaker, surround speakers and a powered subwoofer, and

added Dolby enabled speakers (front) or Dolby enabled speakers (surround)

combined. Dolby enabled speakers are special speakers designed to face the

ceiling, so that the sound is heard from overhead by bouncing the sound o the

ceiling. By installing such height speakers, when the input format is Dolby Atmos,

you can select the Dolby Atmos listening mode which realizes the most up-to-

date 3D sound including overhead sound.

Install them either on the front speakers or on the surround speakers.

7,8 Height Speakers

Choose one of the following:

• Dolby Enabled Speakers (Front)

• Dolby Enabled Speakers (Surround)

20

Front Panel≫ Rear Panel≫ Remote≫

Contents

≫

Connections

≫

Playback

≫

Setup

≫

Speaker Connections and “Speaker Setup” Settings

Connections

 (Note) Speaker Impedance

Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers

to be connected has an impedance of 4 Ω or more and 6 Ω or less, the setting

is required in the System Setup menu after the Initial Setup ( p115) is

completed. Press on the remote controller, and in the Home displayed set

"System Setup" - "Speaker" -"Conguration" - "Speaker Impedance" to "4ohms".

 Connect the Speaker Cables

1/2˝

(12 mm)

Make correct connection between the unit's jacks and speaker's jacks (+ side to

+ side, and - side to - side) for each channel. If the connection is wrong, a bass

sound will not be reproduced properly due to reverse phase. Twist the wires

exposed from the tip of the speaker cable so that the wires do not stick out of the

speaker terminal when connecting. If the exposed wires touch the rear panel,

or the + side and – side wires touch each other, the protection circuit will be

activated.

Page is loading ...

Pioneer VSX-LX103 User manual

Pioneer VSX-LX103 User manual

Related papers

Other documents