Quick Start Guide
1
Close Regulator and Drain Valve.
2
Plug Cord directly into wall.
Extension cord not recommended,
use longer hose instead. See manual.
3
Turn unit on.
4
Connect Hose and adjust Regulator.
Note: After turning off unit, wait 15 seconds before turning back on.
Note: This unit is equipped with Thermal Overload Protection.
If unit does not start, unplug it for 30 minutes
before plugging it back in.
Note: It is normal for pressure relief valve to expel
air during and immediately after operation.
64294
STOP
READ
THIS
FIRST
-
1
McGraw Item 64294 Quick start guide
- Type
- Quick start guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI