Pro-Ject PS01-Wave by Parov Stelar Product information

Pro-Ject
Brand
Pro-Ject
Model
PS01-Wave by Parov Stelar
Category
Audio turntables
Type
Product information

Pro-Ject PS01-Wave by Parov Stelar is a limited edition turntable that combines high-quality audio with a stylish design. Based on the acclaimed Debut Carbon Esprit, the PS01-Wave features an exclusive 7-layer printed design, an 8.6" carbon fiber tonearm, and a non-resonant acrylic platter.

The ultra-silent belt drive system with ultra-precision frequency DC-driven AC generator and synchronous motor ensures accurate speed and minimal wow and flutter. The TPE motor suspension and high-tech damping feet made from TPE effectively isolate the turntable from vibrations, allowing for up to 20% higher listening levels without distortion.

Pro-Ject PS01-Wave by Parov Stelar is a limited edition turntable that combines high-quality audio with a stylish design. Based on the acclaimed Debut Carbon Esprit, the PS01-Wave features an exclusive 7-layer printed design, an 8.6" carbon fiber tonearm, and a non-resonant acrylic platter.

The ultra-silent belt drive system with ultra-precision frequency DC-driven AC generator and synchronous motor ensures accurate speed and minimal wow and flutter. The TPE motor suspension and high-tech damping feet made from TPE effectively isolate the turntable from vibrations, allowing for up to 20% higher listening levels without distortion.

PRODUCT INFORMATION
Technical data and price changes reserved.
Seite 1/2
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
PS01-Wave
Limited turntable edition based on highly
acclaimed Debut Carbon Esprit
MSRP 550 € (incl. VAT)
Speed: 33, 45 (manual speed change)
Drive principle: belt drive
Wow and utter: +/- 0,10%
Speed drift: +/- 0,80%
Platter: 300mm acrylic platter
Main platter bearing spindle: stainless steel
Signal to noise: - 68dB
Tonearm: 8,6” Carbon
Eective arm length: 218,5 mm
Overhang: 18,5mm
Eective tonearm mass: 6,0 g
Tracking force: 10 - 30mN
Included accessory: 15 volts DC / 0,8A power supply,
dust cover
Standby power cunsumption: 1 < watt
Dimensions: 415 x 118 x 320mm (WxHxD) lid closed
Weight: 5,6 kg net
• “Must have” for fans of Parov Stelar and vinyl
• Exclusive design with 7 printing layers
• 8,6” carbon fibre tonearm
• Non-resonant acrylic platter
• Ultra silent belt drive system with ultra precision frequency
DC-driven AC generator and synchronous motor
• TPE motor suspension
• Hightech damping feet made from TPE for up to 20%
higher listening levels without distortion
• Ortofon cartridge 2M red
PRODUCT INFORMATION
Technical data and price changes reserved.
Seite 2/2
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Limited „Parov Stelar“ Edition !
PS01-Wave is joint project of Pro-Ject Audio Systems
and Parov Stelar, that sets an audio landmark! Based on
the worldwide highly acclaimed DEBUT CARBON ESPRIT
(DC), which set a new standard for analogue turntables
for the next decade. PS01-Wave is a real eye-catcher
and meets the growing demand of all fans of high-class,
but aordable vinyl record players and attracts real
Parov Stelar fans!
A rst class tonearm made from carbon bre ensures
superior stiness and signicantly reduced resonances
than metal tonearms. This material normally is extensi-
vely used in high-end tonearms, but – because of cost
reasons – was never used in products at lower price
levels. Together with an acrylic platter the carbon tonearm
oers outstanding sound quality levels! The approved
belt drive design oers low noise AC motor with eective
TPE (Thermo Plastic Elastomere) motor decoupling, and
ultra precision frequency DC-driven AC generator (like
Speed Box) for ultimate speed stability without unwanted
vibration. Due to this eort 20% higher listening levels
without the risk of distortion can be achieved.
PS01-Wave is available as a strictly limited edition of only
1000 pieces worldwide!
  • Page 1 1
  • Page 2 2

Pro-Ject PS01-Wave by Parov Stelar Product information

Pro-Ject
Brand
Pro-Ject
Model
PS01-Wave by Parov Stelar
Category
Audio turntables
Type
Product information

Pro-Ject PS01-Wave by Parov Stelar is a limited edition turntable that combines high-quality audio with a stylish design. Based on the acclaimed Debut Carbon Esprit, the PS01-Wave features an exclusive 7-layer printed design, an 8.6" carbon fiber tonearm, and a non-resonant acrylic platter.

The ultra-silent belt drive system with ultra-precision frequency DC-driven AC generator and synchronous motor ensures accurate speed and minimal wow and flutter. The TPE motor suspension and high-tech damping feet made from TPE effectively isolate the turntable from vibrations, allowing for up to 20% higher listening levels without distortion.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents