Chicco Corso Infant Seat Insert Operating instructions

Brand: Chicco

Model: Corso Infant Seat Insert

Type: Operating instructions

This manual is also suitable for

Corso™ Stroller Infant Seat Insert Manual

Chicco Corso Infant Seat Insert: A comprehensive solution for enhanced safety and comfort during your baby's early months. Designed to provide optimal support and protection, this insert transforms your stroller seat into a cozy and secure haven for your little one. With its multi-component design, it accommodates newborns from 0-4 months, ensuring a snug fit and a peaceful ride. The Newborn Wedge offers additional support for your baby's delicate head and neck, while the Head Rest provides extra cushioning and comfort.

Slide the Shoulder Straps from the Shoulder Pads,

as shown. The Shoulder Pads will still be attached to the

D-Ring. Allow them to hang behind the Shoulder Straps

for later use.

WARNING: Avoid serious injury or death to your child. You

must read and understand the Seat Insert instructions and the

instructions in the User Guide. Do not use Seat Insert with child

weighing more than 40 lbs. (18 kg). If you do not understand

these instructions, call Chicco at 1-877-424-4226.

INSTRUCTIONS: Corso™ Infant Seat Insert

IMPORTANT: Please also refer to the instructions that came with your product.

Release the Harness Buckle by pressing the button on

the center of the Buckle. Then recline the Seat Back to the lowest

position.

SS0025E_01

PMS 2747 and PMS 186

Kit Includes:

1 Seat Insert

1 Newborn Wedge

1 Head Rest

2 Shoulder Pads

Place the Newborn Wedge on the Stroller seat with

the slits pointing down. Guide both waist straps up into

the Newborn Wedge slits, as shown. Make sure the straps

are not twisted.

Place the Seat Insert in front of the Newborn Wedge

on the Seat. Make sure to attach both sections of hook

and loop together.

IMPORTANT: Remove the Newborn

Wedge when child reaches 4 months old.

IMPORTANT: Use all components together for a child who is from 0-4 months old.

Slide the Shoulder Pad onto the Shoulder Strap, as

shown. Repeat for the other shoulder pad.

Buckle the Harness and make sure the straps are

not twisted.

IMPORTANT: Stroller Seat must be in the

full reclined position when using for infant from 0-4

months.

To attach the Headrest, Thread the attachment straps

through the set of openings just above the shoulder straps.

Pull the top of the Seat Insert forward, attach the hook

and loop sections together.

IMPORTANT: Do not use the

Headrest without the Seat Insert.

Fabrics may be spot-cleaned with mild soap and water, or machine washed in cold water on delicate cycle using mild

detergent. Attach hook and loop parts together before washing. Hang to dry. DO NOT BLEACH.

Please consult your product manual for additional care and maintenance instructions.

Contact Chicco Customer Service at 1-877-424-4226 for assistance in removing or replacing the softgoods.

Cleaning Instructions:

Make sure the Seat Flaps lay on top of the side Seat

Back Flaps.

IMPORTANT: Seat Insert may be used until

the child reaches 40 lbs.

Thread the Crotch Strap and Crotch Strap Pad up

through the opening on the Seat Insert.

Then thread the Waist Belt Straps (A) through the

vertical openings. Thread the Shoulder Straps (B)

through the opening at or just above child’s shoulders.

Only use the bottom 2 shoulder strap openings when

using the wedge behind the insert.

IMPORTANT: The top

2 shoulder strap openings may be used when the Wedge

and Headrest are removed.

Chicco Corso Infant Seat Insert Operating instructions

Brand: Chicco

Model: Corso Infant Seat Insert

Type: Operating instructions

This manual is also suitable for

Corso™ Stroller Infant Seat Insert Manual

Download PDF

report

Chicco Corso Infant Seat Insert Operating instructions

This manual is also suitable for

Chicco Corso Infant Seat Insert Operating instructions

Related papers

Other documents