Freestyle FS 1064 User manual

Brand: Freestyle

Model: FS 1064

Category: Sport watches

Type: User manual

This manual is also suitable for

Freestyle- Gromatide Instruction

30/01/2010

FS 1064 Gromatide AG7027-INST-R01

2741

AG7027

27/01/2010

GROMATIDE

FEATURES:

• Tidedatafor75beachesworldwide

• 180minuteoffset

• Displayspresentandfuturetidedata

• 9programmablefavoritelocations

• Optionalbigtimewithsharkn

 animation

• 100metersH20

SPECIAL FEATURE

ThisFreestyleproductfeaturesunique

HydroPushers®:thesepusherscanbe

pressedunderwatertoadynamicwater

pressure(notwaterdepth)of3ATM.

CONTROL BUTTONS

S1:StartButton

S2:Stop/ResetButton

S3:ModeButton

S4:SetButton

S5:LightButton

DISPLAY MODE

Thewatchhassixdisplaymodes:NORMAL

TIME,TIDE,CHRONO,TIMER,HEATTIMER

andALARM.

Tochangefromonedisplaymodeto

another,pressS3buttononce.

NOTE:Inanysettingmode,ifthereisno

manipulationforabout120seconds,the

watchwillautomaticallyexitthesetting

procedure.

TO SET THE TIME AND CALENDAR

1. PressS3buttontoselectNORMALTIME

mode.

2. PressandholdS4buttonfortwosec-

ondsuntilthe“SET”messageappears

andtheTimeZoneblinksonthedisplay.

3. PressS1buttonorS2buttontotoggle

betweenTimeZone1andTimeZone2.

4. PressS3buttononce,theHourdigits

(includingAM/PMfor12-hourformat)

willblink.

5. PressS1buttontoincreasethedigitsby

oneunit,orpressS2buttontodecrease

thedigitsbyoneunit.Holdingdown

eitherbuttonwillspeeduptheprocess.

6. PressS3buttononce,theMinutedigits

willblink.

7. PressS1buttonorS2buttontosetthe

Minutedigits.

8. PressS3buttononce,theSeconddigits

 willblink.

9. PresseitherS1buttonorS2buttonto

 settheSeconddigitstozero.

10.PressS3buttononce,theMonthdigits

willblink.

11.PressS1buttonorS2buttontosetthe

Monthdigits.

12.PressS3buttononce,theDatedigits

willblink.

13.PressS1buttonorS2buttontosetthe

Datedigits.

14.PressS3buttononce,theYeardigits

willblink.

15.PressS1buttonorS2buttontosetthe

Yeardigits.

16.PressS3buttononce,theTimeFormat

willblink.

17.PressS1buttonorS2buttontotoggle

between12-hourand24-hourTime

Format.

18.PressS3buttononce,theDateFormat

willblink.

19.PressS1buttonorS2buttontocycle

amongMM-DD-YY(month-date-year),

DD-MM-YY(date-month-year)andYY-

MM-DD(year-month-date)tosetthe

DateFormat.

20.PressS3buttononce,theDay(ofthe

week)Languagewillblink.

21.PressS1buttonorS2buttontocycle

amongEnglish,French,Portugueseand

SpanishtosettheDayLanguage.

22.PressS3buttononce,theHourlyChime

statuswillblink.

23.PressS1buttonorS2buttontotoggle

betweenONandOFFofHourlyChime.

24.PressS3buttononce,theButtonBeep

statuswillblink.

25.PressS1buttonorS2buttontotoggle

betweenONandOFFofButtonBeep.

26.PressS3buttononce,theBigTimeOp-

tionstatuswillblink.

27.PressS1buttonorS2buttontotoggle

betweenONandOFFofBigTimeOp-

tion.

28.PressS3buttononce,theTideHeight

unitwillblink.

29.PressS1buttonorS2buttontotoggle

betweenfeetandmetersforTideHeight

unit.

30.Afternishedmakingallthesettings,

pressS4buttontoconrmthesettings.

NOTE:Thedateisdisplayedinthecurrent

DateFormat,butthesettingsequence

shallalwaysbemonth,date,andthenyear,

regardlessoftheDateFormatchosen.

NOTE:Theavailabledaysofthemonth

shallbedeterminedbythemonthsetting.

IfFebruaryisset,theavailabledaysofthe

monthshallbe1to29.IfFebruary29isset

forayearthatisnotaleapyear,thedate

shallbecorrectedtoFebruary28uponexit

fromthesettingprocedure.

NOTE:ForBigTimeOption,ifOFFis

selected,onlydate/timeandtide/time

formatswillbeavailableinNORMALTIME

mode;ifONisselected,theBigTime

displayformatshallalsobeavailablein

NORMALTIMEmode.

NOTE:TheTimeFormatandDateFormat

settingsapplyonlytotheselectedTime

Zone;whilethesettingsofDayLanguage,

HourlyChime,ButtonBeep,BigTime

OptionandTideHeightunitapplytoboth

TimeZones.

DIFFERENT DISPLAY FORMATS IN

NORMAL TIME MODE

Therearethreedisplayformatsineach

TimeZoneinNORMALTIMEmode:date/

time,tide/timeandbigtime.

TochangefromoneTimeZonetoanother,

pressS2buttononce.

Tochangefromonedisplayformatto

another,pressS1buttononce.

Indate/timedisplayformat,

theprimarytimedayanddateareshown

inthetopofthedisplay;thetimeinhours,

minutesandsecondsisshowninthebot-

tomofthedisplay.Thedataisshowninthe

DateandTimeFormatsofthedisplayed

TimeZone,whicharesetinthismode

alongwiththedateandtime.

Ifthereispreviousandupcomingtidedata,

theleft-handpartofthedisplayshows

thetidestatusforthecurrentlyselected

tidelocation.Otherwise,nographicis

displayed.

Intide/timedisplayformat,

thedisplayisidenticaltothedate/time

formatexceptthatthenexttide(highor

low)forthecurrentlyselectedtidelocation,

thetimeofthenexttide,anditsheightare

showninplaceofthedayandthedate.The

tidetimeisshowninthesameformatas

theprimarytime.TheTideHeightisshown

inthecurrentTideHeightunitselected.

Ifnopreviousorupcomingtidedatais

available,thisformatshallbeunavailable

andtheformatshallreverttodate/time.

Inbigtimedisplayformat,

onlythehoursandminutesoftheprimary

timeareshown,noAM/PMindication.

Asharknanimationshalloccuronceper

minutes.Forevenminutes,thenshall

movefromlefttorightonedotcolumnat

atime,andforoddminutes,thenshall

movefromrighttoleft.

Thebigtimedisplayformatisincludedonly

iftheBigTimeOptionison.

NOTE:Thecurrenttidelevelanddirection

(risingorfalling)shallbepresentedbya

tidestatusgraphic,whichisrepresentedby

anarrowheadtwodotshighandthreedots

wide.Thestepsshallappearasfollows:

Indisplays1through10,thetideisrising;

whileindisplays11through20,thetide

isfalling.Whenthetimeofdayadvances

totheminuteafterthetimeofhightide,

display11isshown;whenthetimeofday

advancestotheminuteafterthetimeof

lowtide,thesequencerepeatsbeginning

withdisplay1.

TO USE TIDE DATA

Fordisplayingtideinformationofcurrent

timeandlocation,

1.PressS3buttontoselectTIDEmode.

 Thefavoritenumberandthenameof

 currenttidelocationwillappear.

2.Aftertwoseconds,thenextupcoming

tide(highorlow),baseontheprimary

time,forthecurrenttidelocationwill

bedisplayed.Thedatewillbedisplayed

inthetopline,thenexttidewillbedis-

playedinthemiddlelinefollowedbythe

timeofthattide(withasuperscriptA/P

representingAM/PMin12-hourformat),

andtheheightofthenexttidewillbe

displayedinthebottomline(including

minussignifnecessary).

3.PressS1orS2buttontodisplaythe

 previousandnexttiderespectively.

4.PressandholdS1buttonorS2button

 untilthe“SCAN”messageappearsto

 initiatedatescanningintheforwardor

 backwarddirectionrespectively.

5.Releaseeitherbuttonwhenthedesired

 dateisdisplayed.

6.Afterabandoningthedatescanning

 procedure,whilethe“SCAN”messageis

 stilldisplayed,pressS1buttonorS2

 buttontomoveforwardorbackward

 respectivelythedisplayeddatebyone

 day.Pressandholdthecorrespond-

 ingbuttonstoreinitiatedatescanning.

NOTE:Ifnopreviousorupcomingtidedata

isavailable,thesentence“NOTIDEDATA

FORDATE”willbedisplayed.

NOTE:Thedate,timeandtideheightunit

willbedisplayedintheformatsofthe

primarytimesetinNORMALTIMEmode.

NOTE:IfthedisplayedtimerepresentsDST

(daylightsavingstime),whichmeansthat

thetimewasadjustedfromthestoredtide

data,theDSTagwillappear.

NOTE:Scanningshallstopautomatically

ifthelastdateforwhichthereistidedata

isreached.

Forsettingtidelocation,

1. PressS3buttontoselectTIDEmode.

Thefavoritenumberandthenameof

currenttidelocationwillappear.

2. PressS4button,the“SET”messageap-

 pearsandtheFAV(favorite)number

blinksonthedisplay.Thedefaultfavor-

ENGLISH ENGLISH

Freestyle- Gromatide Instruction

30/01/2010

FS 1064 Gromatide AG7027-INST-R01

2741

AG7027

27/01/2010

itenumberistheoneforthecurrent

location.

3. PressS1buttonorS2buttontomove

forwardorbackwardrespectivelythe

favoritenumberandthereforethecorre-

spondinglocationnametobeselected.

4. PressS3button,thegeographicalRE-

GIONwillblink.

5. PressS1buttonorS2buttontomove

forwardorbackwardrespectivelythe

REGIONtobeselected.

6. PressS3button,thegeographicalLOCA

TIONwillblink.

7. PressS1buttonorS2buttontomove

forwardorbackwardrespectivelythe

LOCATIONtobeselected.

8. PressS3button,theDST(daylightsav-

ingstime)statuswillblink.

9. PressS1buttonorS2buttontomove

forwardorbackwardrespectivelythe

DSTstatustobeselected.IfAUTOisse-

lected,thewatchshalldeterminewhen

thelocationisonDST;

 ifOFForONisselected,theDSTstatus

isforcedtotheselectedstatusallthe

time.PleasenotethatthecurrentDST

statusisshownwiththeDSTag.

10.PressS3button,thecustomlocation

selectionwillblink.

11.PressS1orS2buttontotogglebetween

YESandNO.IfNOisselected,thatstep

istheendofthesettingsequence.Oth-

erwise,thesequencecontinuestoallow

settingthetimeoffsettothetidedata

andthe16charactersofthecustom

locationname.

12.PressS3button,thetimeoffset(inthe

unitofminutes)tothetidedataforthe

customlocationwillblink.

13.PressS1buttonorS2buttontoincrease

ordecreaserespectivelythetimeoffset

(theavailableoffsetsare-180,-170,…,

-10,0,+10,…,+170,+180minutes).The

offsethasnoimpactontheDSTstatus.

14.PressS3button,therstcharacterof

the16-charactercustomlocationname

willblink.

15.PressS1buttonorS2buttontocycle

forwardorbackwardrespectivelythe

selectedcharacter.PressS3buttonto

proceedtothenextcharacter.

16.Afternishedmakingallthesettings,

pressS4buttontoconrmthesettings.

TO USE THE CHRONOGRAPH

Forthemeasurementofelapsedtime,

1.PressS3buttontoselectCHRONO

 GRAPHmode.

2.PressS1buttontostartcounting.

3.Tostopcounting,pressS2button.Press

 S1buttontoresumefromwhereitleft

 off.

4.Toresettozero,pressS2buttononce

 tostopcountingandthenpressS2but-

 tonagain.

NOTE:Forthersthour,theCHRONOtime

isdisplayedintheMM.SShh(minutes.

secondhundredths)format.Afteronehour,

theCHRONOtimeisdisplayedinHH:MM

SS(hours:minutes.seconds)format.

NOTE:TheCHRONOcancountup

toamaximumtimeof99:59.59

(99hours:59minutes.59seconds).

TO SET THE TIMER

1. PressS3buttontoselectTIMERmode.

2. PressS4button,the“SET”message

appearsandtheHourdigitsblinkonthe

display.

3. PressS1buttontoincreasethedigitsby

 oneunit,orpressS2buttontodecrease

thedigitsbyoneunit.Holdingdown

eitherbuttonwillspeeduptheprocess.

4. PressS3buttononce,theMinutedigits

willblinkonthedisplay.

5. PressS1buttonorS2buttontosetthe

Minutedigits.

6. PressS3buttononce,theSeconddigits

willblinkonthedisplay.

7. PressS1buttonorS2buttontosetthe

Seconddigits.

8. PressS3buttononce,theactiontobe

 takenattheendofacountdownwill

blink.

9. PressS1buttonorS2buttontotoggle

betweenSTOPandREPEAT.IfSTOPis

selected,theTIMERstops;ifREPEATis

selected,theTIMERrepastsitscount

downfor99times.

10.Afternishedmakingallthesettings,

pressS4buttontoconrmthesettings.

NOTE:TheTIMERcancountup

toamaximumtimeof23:59.99

(23hours:59minutes.59seconds).

TO USE THE TIMER

1.PressS3buttontoselectTIMERmode.

2.PressS1buttontostartacountdown.

3.Tostopcounting,pressS2buttononce.

 PressS1buttontoresumefromwhereit

 leftoff.

4.ToresettheTIMER,pressS2buttononce

 tostopcountingandthenpressS2but-

 tonagain.

5.Uponcompletionofacountdown,if

 STOPisselectedastheactiontobe

 taken,theTIMERstopsatzero,atune

 willbeemittedandthebacklightwill

 ash;ifREPEATisselected,theTIMER

 repeatsitscountdownwiththerep

 numberupdated.IftheTIMERreset

 timeislessthan30seconds,abeepwill

 beemitted.Otherwise,atunewillbe

 emittedandthebacklightwillash.

TO SET THE HEAT TIMER

1.PressS3buttontoselectHEATTIMER

 mode.

2.PressS4button,the“SET”message

 appearsandtheMinutedigitsblinkon

 thedisplay.

3.PressS1buttontoincreasethedigits

 byveunits,orpressS2buttonto

 decreasethedigitsbyveunits.Holding

 downeitherbuttonwillspeedupthe

 process.

4.Afternishedmakingallthesettings,

 pressS4buttontoconrmthesettings.

NOTE:TheHEATTIMERcancountuptoa

maximumtimeof35.00(35minutes).

TO USE THE HEAT TIMER

1.PressS3buttontoselectHEATTIMER

 mode.

2.PressS1buttontostartacountdown.

3.Tostopcounting,pressS2buttononce.

 PressS1buttontoresumefromwhereit

 leftoff.

4.ToresettheHEATTIMER,pressS2but-

tononcetostopcountingandthenpress

S2buttonagain.

5.Uponcompletionofacountdown,atune

 willbeemittedandthebacklightwill

 ash.

NOTE:TheHEATTIMERisindependent

oftheTIMER.Bothmayberunningatthe

sametime.

TO SET THE ALARM TIME

1. PressS3buttontoselectALARMmode.

2. PressS4button,the“SET”messageap

pearsandthealarmentrytosetblinks

onthedisplay.

3. PressS1buttonorS2buttontotoggle

betweenALARM1andALARM2.

4. PressS3button,theHourdigits(includ

ingAM/PMfor12-hourformat)will

blink.

5. PressS1buttontoincreasethedigitsby

oneunit,orpressS2buttontodecrease

thedigitsbyoneunit.Holdingdown

eitherbuttonwillspeeduptheprocess.

6. PressS3button,theMinutedigitswill

blink.

7. PressS1buttonorS2buttontosetthe

Minutedigits.

8. PressS3button,thealarmfrequency

willblink.

9. PressS1buttonorS2buttontocycle

forwardorbackwardrespectivelythe

alarmfrequencytobeselected(DAILY,

WEKDAYS,WEEKENDS,dayofthe

weekandWKLY).

10.Afternishedmakingallthesettings,

pressS4buttontoconrmthesettings.

NOTE:TheALARMTIMEdisplayedisinthe

sameTimeFormatastheprimarytime.

NOTE:Atunewillgooffandthebacklight

willashfor20secondsatthedesignated

timewhentheALARMisactivated.

NOTE:Thealarmwillautomaticallybe

activatedafterbeingset.

WHEN AN ALARM OR HOURLY CHIME

GOES OFF

AtunewillgooffbythehouriftheHourly

Chimefunctionisactivatedandthesame

willhappenatthedesignatedtimewhen

theALARMisactivated.Tostopthetune,

pressanybutton.

Ifthealarmtuneisdonewithoutanyuser

interruption,thewatchwillautomatically

enterasnoozemode.TheALARMwillgo

offagainafter5minutesbutforonlyonce.

TO USE THE BACKLIGHT

PressS5buttontoturnonthebacklightfor

threeseconds.

Toreducecarbonfootprint,these

Freestyleinstructionsareprintedwith

soyinksonrecycledpaper.

ENGLISH ENGLISH

FS1064-GROMATIDE-AG7027-R01

Page is loading ...

Freestyle- Gromatide Instruction

30/01/2010

FS 1064 Gromatide AG7027-INST-R01

2741

AG7027

27/01/2010

WEST CST USA

Huntingt Huntington Beach, CA

Trestles Trestles, San Clemente, California

Oceansd Oceanside, California

La Jolla La Jolla, California

Humboldt Humboldt Bay, California

Ocean B. Ocean Beach, outer coast

Mvricks Mavericks, California

St. Cruz Santa Cruz, California

Morro B. Morro Bay, California

Pismo B. Pismo Beach, California

Gaviota Gaviota, California

Rincon Rincon, California

Ventura Ventura, California

Malibu Malibu, California

Redondo Redondo Beach, California

Anchorag Anchorage, Alaska

Elliot B Seattle, Washington

Seaside Seaside, Oregon

Newport Newport, Oregon

EAST CST USA

Sebastn Sebastian Inlet, Florida

N. Miami North Miami Beach, Florida

St. Aug St. Augustine Beach, Florida

Hamptn H Hampton Harbor, New Hampshire

Nauset H Nauset Harbor, Cape Cod,

Massachusetts

Montauk Montauk Point, Long Island Sound,

New York

Manasqn Manasquan Inlet, USCG Station,

New Jersey

Atlantic Atlantic City (Steel Pier), New Jersey

Ocean Ct Ocean City (shing pier), Maryland

Rehoboth Rehoboth Beach, Delaware

Virginia Virginia Beach, Virginia

C. Hattrs Cape Hatteras, North Carolina

Wrightsv Wrightsville Beach, North Carolina

Myrtle Myrtle Beach, South Carolina

HAWAII USA

Haleiwa Haleiwa, Oahu Island, Hawaii

Hanalei Hanalei Bay, Kauai Island, Hawaii

Banyans Banyans, Big Island, Hawaii

Ma’alaea Ma’alaea, Maui Island, Hawaii

Lahaina Lahaina, Maui Island, Hawaii

Sandy B Sandy Beach, Oahu Island, Hawaii

GULF CST USA

Pnma Cty Panama City Beach, Florida

Naples Naples Pier, Florida

Galvestn Galveston (Pleasure Pier), Texas

Corp Chr Corpus Christi, Texas

ISLANDS CARIBB

San Juan San Juan, Puerto Rico

Bdgetown Bridgetown, Barbados

CANADA

Tono Tono, British Columbia

MEXICO

Prt Escn Puerto Escondido, Oaxaca, Mexico

Mazatlan Mazatlán, Sinaloa, Mexico

Ensenada Ensenada, Baja California Norte, Mexico

WATCH DISPLAY LOCATION

VISUALIZACIÓN LUGAR

UHRANZEIGE STANDORT

AFFICHAGE SUR LA MONTRE EMPLACEMENT

DISPLAY OROLOGIO LUOGO

MOSTRADOR DE RELÓGIO LOCAL

時計のディスプレイロケーション

Freestyle- Gromatide Instruction

30/01/2010

FS 1064 Gromatide AG7027-INST-R01

2741

AG7027

27/01/2010

WATCH DISPLAY LOCATION

VISUALIZACIÓN LUGAR

UHRANZEIGE STANDORT

AFFICHAGE SUR LA MONTRE EMPLACEMENT

DISPLAY OROLOGIO LUOGO

MOSTRADOR DE RELÓGIO LOCAL

時計のディスプレイロケーション

CENTRAL AMERICA

Pta Arns Punta Arenas, Costa Rica

Cristobl Cristóbal, Panama

Libertad La Libertad, El Salvador

PACIFIC ISLANDS

Teahup. Teahupoo, Tahiti

Tavarua Tavarua, Fiji

GUAM

Agana Agana, Guam

AUSTRLIA

Sydney Sydney Beaches, Australia

Bells B. Bells Beach, Australia

Marg Rvr Margaret River, Australia

Phlp Isl Phillip Island, Australia

Newcastle Newcastle, Australia

NEW ZEALAND

Raglan Raglan, New Zealand

Hobart Hobart, Tasmania

SOUTH AMERICA

Rio de J Rio de Janeiro, Brazil

Floriano Florianópolis, Brazil

EUROPEAN

Bordeaux Anglet

Ferrol El Ferrol Del Caudillo, Spain

Newquay Imham, UK

Portrush Portrush, Northern Ireland

Canary Canary Island

ASIA

Bali Bali, Indonesia

Le Port Le Port, Reunion Island

Muroto Muroto

Irago Irago

Maizuru Maizuru

SOUTH AFRICA

Durban Durban, South Africa

Toreducecarbonfootprint,these

Freestyleinstructionsareprintedwith

soyinksonrecycledpaper.

Freestyle FS 1064 User manual

Brand: Freestyle

Model: FS 1064

Category: Sport watches

Type: User manual

This manual is also suitable for

Download PDF

report

in other languages

italiano: Freestyle FS 1064 Manuale utente
français: Freestyle FS 1064 Manuel utilisateur
español: Freestyle FS 1064 Manual de usuario
Deutsch: Freestyle FS 1064 Benutzerhandbuch
português: Freestyle FS 1064 Manual do usuário
日本語: Freestyle FS 1064 ユーザーマニュアル

Freestyle FS 1064 User manual

This manual is also suitable for

Freestyle FS 1064 User manual

in other languages

Related papers

Other documents